Tag Archives: screw post

MULTIGRIP BLIND RIVET

Posted in Blind rivets by

BLIND THREADED RIVET

HIGH STRENGTH

MULTIGRIP BLIND RIVET

TM SERIES

MULTIGRIP-3(topquality) MULTIGRIP-1

MATERIAL AVAILABLE FOR MULTI-GROP BLIND RIVETS: 


RIVET BODY MATERIAL : ALUMINUM 5052.

MANDREL MATERIAL : STEEL / ZINC PLATED.

SUITABLE APPLICATION:

  • AUTOMOBILES, MOTORCYCLES, ELECTRICAL APPLIANCES, LIGHTING FIXTURES, ETC.
  • MAKES THE GAP OF JOINING OBJECTS EXPAND FIRST THEN RIVETS THEM CLOSELY.
  • IT WILL NOT BE LOOSENED BY SHANK.
  • THE INNER AND OUTER JOINS ARE GOOD LOOKING.
  • HELPS REDUCE STOCK RANGE.
  • PARTICULAR DOME HEADS ACCEPTABLE.
  • FINISH AVAILABLE IN A MULTIPLE OF COLORS.

MULTIGRIP-2(topquality)

–OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

rivet(topquality)

TSC4 SELF CLINCHING NUTS

Posted in Self clinching parts by

SELF CLINCHING PART

SELF CLINCHING NUTS

TSC4 SERIES

1(topquality) DOC122112

ADVANTAGES OF CLINCHING PARTS:

  •    PROVIDE STRONG THREADS IN METAL AS THIN AS 020″ / .51 MM.
  •    MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
  •    PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
  •    DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
  •    REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
  •    NO RETAPPING NECESSARY AFTER APPLICATION.
  •    LOW INSTALLED COSTS.

 – NUTS

NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.

4(topquality)

TSC1 SELF CLINCHING STANDOFF

Posted in Self clinching parts by

SELF CLINCHING PARTS

SELF CLINCHING STANDOFF

TSC1 SERIES

1(topquality)

MATERIAL AVAILABLE FOR SELF CLINCHING STANDOFFS:

STEEL, STAINLESS STEEL, ALUMINUM

ADVANTAGES OF CLINCHING PARTS:

  • PROVIDE STRONG THREADS IN METAL AS THIN AS 020″ / .51 MM.
  • MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
  • PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
  • DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
  • REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
  • NO RETAPPING NECESSARY AFTER APPLICATION.
  • LOW INSTALLED COSTS.

 – STANDOFFS 

USED WHERE IT IS NECESSARY TO STACK OR SPACE COMPONENTS AWAY FROM THE PANEL. THRU-THREADED OR BLIND TYPES ARE GENERALLY STANDARD.

-OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

3(topquality) 4(topquality)

BLIND JACK NUTS

Posted in Blind jack nuts by

BLIND JACK NUTS

TJM & TJU SERIES

3(topquality)

THE BLIND JACK NUT IS AN ECONOMICAL BLIND FASTENER DESIGNED FOR ASSEMBLY LIND USE IN THIN, SOFT OR BRITTLE MATERIALS. WHEN TIGHTENED, THEIR BODY COLLAPSES TO FORM LEGS WHICH GRIP THE INSIDE OF THE MOUNTING SURFACE, LEAVING A PERMANENT REUSABLE THREADED INSERT. STANDARD BLIND JACK NUT ARE MANUFACTURED OF STEEL WITH A COMMERCIAL ZINC PLATING. ALL BLIND JACK NUTS CAN BE SUPPLIED WITH BRASS COATED WHICH ASSIST GALVANIC CORROSION CONCERNS.

MATERIAL AVAILABLE FOR BLIND JACK NUT: 
STEEL, STAINLESS STEEL

FEATURES:

  • FASTENS IN BLIND HOLES
  • FASTENS SECURELY DESPITE BURRS & UNEVEN SUBSTRATES
  • NOT HOLE SIZE SENSITIVE
  • SUITABLE FOR WIDE GRIP RANG

APPLICATIONS:

  • SPOILERS AND OTHER AERODYNAMIC DEVICES
  • LICENCE PLATE BRACKETS
  • HIGH-LAMP STOP LIGHTS
  • AIR CONDITIONING CONDENSERS
  • GLOVE COMPARTMENTS
  • SPEAKER HOUSINGS
  • LATH MOUNTINGS
  • TRUCK UTILITY COMPARTMENTS
  1. THREAD INSRT ONTO THE MANDREL OF INSTALLATION TOOL, THEN INSERT ALL THE WAY INTO PREDRILLED HOLE UNTIL FLANGE IS FIRMLY AGAINST MOUNTING SURFACE.
    2-1(topquality)
  2. FULLY COLLASPE INSERT, THEN REMOVE TOOL.
    2-2(topquality)
  3. PASS MACHINE SCREW THROUGH PART TO BE FASTENED, THEN TIGHTEN UNTIL SUNG.
    2-3(topquality)

– OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

BLIND JACK NUT TOOL 

AN ECONOMICAL, EASY TO USE TOOL FOR LOW-VOLUME INSTALLATION IN ANY MATERIAL. THREAD PULL-ROD INTO BLIND JACK NUT, INSERT INTO HOLE, AND SQUEEZE HANDLES TO SET. INTERCHANGEABLE PULL-OUT RODS AVAILABLE TO SET ALL SIZES. PNEUMATIC BLIND JACK NUT TOOL ALSO AVAILABLE.

JACK-NUT-SMALL(topquality)

1(topquality)

STRETCH FOLDING BLIND RIVET

Posted in Blind rivets by

STRETCH FOLDING BLIND RIVET

TS SERIES

 1(topquality) 3(topquality)

MATERIAL AVAILABLE FOR STRETCH FOLDING BLIND RIVETS: 

RIVET BODY MATERIAL : ALUMINUM 5052.

MANDREL MATERIAL : ALUMINUM 5056.

POSITIVE MANDREL RETENTION :

RATTLE FREE FASTENER

CORROSION RESISTANT:

ALL ALUMINUM CONSTRUCTION

MULTI GRIP:

  • ADJUSTS TO A WIDE VARIATION OF SUBJECT’S THICKNESS.
  • FINISH AVAILABLE IN A MULTIPLE OF COLOR.

SUITABLE APPLICATIONS:

  • SUPPORTS BRITTLE, THIN SOFT OR DUCTILE MATERIALS AND FUNCTIONS WHEN USED WITH OVERSIZED, MISALIGNED OR IRREGULARLY SHAPED HOLES.
  • THE STRETCH FOLDING BLIND RIVET FORMS THREE LARGE FOLDING LEGS THAT CREATE EXCELLENT CLAMPING-UP AND A LARGE BLIND SIDE BEARING SURFACE.

2(topquality)

HEXAGON RIVET NUT – FHSM & FHSI SERIES

Posted in Blind rivet nuts by

HEXAGON RIVET NUT :

FHSM & FHSI SERIES

FULL-HEXAGON WITH SMALL FLANGE RIVET NUT

AND HEX FLANGE, ROUND INTERNAL HOLE, OPEN END

1(topquality)

MATERIAL AVAILABLE:

STEEL, STAINLESS STEEL 302( INOX A2/18-8) AND 316 ( INOX A418-10), BRASS, ALUMINUM 5056

SURFACE FINSIH AVAILABLE:
STEEL:CR3 WHITE/YELLOW/BLACK ZINC PLATED, CR3 ZINC NICKEL PLATED, NICKEL PLATED
STAINLESS STEEL: CLEAN OR PASSIVATED.
BRASS:CLEAN
ALUMINUM:CLEAN

CHARACTERISTICS OF SMALL FLANGE BLIND RIVET NUT

  • THE BLIND RIVET NUT HAS BEEN SPECIALLY DEVELOPED TO GIVE DESIGNERS A STRONG AND VIBRATION- PROOF STEEL THREAD IN THIN SHEET APPLICATIONS.
  • THE BLIND RIVET NUT CAN BE USED TO ASSEMBLE TWO OR MORE SHEETS OF VARIOUS MATERIALS (STEEL, ALUMINUM, WOOD, PLASTIC, ETC.) AND CAN BE FIXED BY A SCREW.
  • THE HEAD OF SMALL FLANGE BLIND RIVET NUT IS IN A COUNTERSUNK SHAPE THAT MAKES THE APPLICATION SURFACE FLAT AND SMOOTH AFTER INSTALLATION.
  • THE BLIND RIVET NUT IS FAST AND CONVENIENT IN INSTALLATION.
  • APPLICATION SURFACE FINISH WILL NOT BE DAMAGED AFTER INSTALLTION OF BLIND RIVET NUT.

THE BLIND RIVET NUT OFFERS THE FOLLOWING ADVANTAGES

  • EASY AND FAST INSTALLATION.
  • HIGH TORQUE AND STRONG THREADS ARE COMPARABLE TO NORMAL FASTENERS.

ASSEMBLY APPLICATIONS

  • AUTOMATIVE
  • ELECTRICAL ENGINEERING
  • SHEET METAL
  • GENERAL LIGHT FABRICATION

-OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

2(topquality)

3(topquality)

ALUMINUM/STEEL BLIND RIVETS

Posted in Blind rivets by

ALUMINUM/ STEEL BLIND RIVETS TS.AAS. SERIES

　

  

TS.AAS.

ITEM SIZE

ALUMINUM RIVET

STEEL SHAFT

 A(HEAD DIA.) B(BODY DIA.) (INCH) C(LENGTH) (INCH)
TS.AAS 3-2 4.5mm 2.4mm 3/32 5.80mm .23
TS.AAS 3-3 7.40mm .30
TS.AAS 3-4 8.40mm .33
TS.AAS 4-1 6.4mm 3.2mm 1/8 4.80mm .19
TS.AAS 4-2 6.40mm .25
TS.AAS 4-3 8.00mm .315
TS.AAS 4-4 9.60mm .38
TS.AAS 4-5 11.50mm .45
TS.AAS 4-6 12.70mm .50
TS.AAS 4-8 16.10mm .63
TS.AAS 5-1 8.0mm 4.0mm 5/3 5.80mm .23
TS.AAS 5-2 7.00mm .275
TS.AAS 5-3 8.50mm .335
TS.AAS 5-4 10.00mm .394
TS.AAS 5-5 11.40mm .488
TS.AAS 5-6 13.00mm .511
TS.AAS 5-8 16.50mm .65
 TS.AAS 5-10 19.50mm .77
TS.AAS 6-1 9.0mm 4.8mm 3/16 6.40mm .25
TS.AAS 6-2 7.40mm .30
TS.AAS 6-3 9.60mm .38
TS.AAS 6-4 11.00mm .44
TS.AAS 6-5 12.70mm .50
TS.AAS 6-6 14.50mm .57
TS.AAS 6-8 17.50mm .69
TS.AAS 6-10 20.40mm .80
TS.AAS 6-12 24.00mm .95

MATERIAL AVAILABLE FOR ALUMINUM/ STEEL BLIND RIVETS TS.AAS. SERIES:

RIVET:   ALUMINUM 5050
SHAFT: STEEL 1018 ~ 1022

FINISH SURFACE AVAILABLE:
RIVET:   SELF COULOUR/ COLOURED IN YELLOW/ BLACK/ WHITE/ RED…ETC
SHAFT:  CR3 WHITE ZINC PLATED/ CR3 YELLOW ZINC PLATED

ADVANTAGES OF ALUMINUM/STEEL BLIND RIVET:

  • ALUMINUM/STEEL BLIND RIVETS PROVIDE STRONG HOLDING FOR APPLICATION.
  • ALUMINUM/STEEL BLIND RIVETS ARE LOW IN COST COMPARE WITH BOLT AND NUT.
  • ALUMINUM/STEEL BLIND RIVETS ARE IDEAL FOR WIDE RANGE APPLICATION.
  • ALUMINUM/STEEL BLIND RIVETS ARE AVAILABLE IN DOME, COUNTERSUNK OR LARGE FLANGE STYLE.
  • ALUMINUM/STEEL BLIND RIVETS ARE FAST AND EASY TO INSTALL.
  • ALUMINUM/STEEL BLIND RIVETS ARE IDEAL FOR RUST RESISTANCE APPLICATION.
  • ALUMINUM/STEEL BLIND RIVETS ARE IDEAL FOR LIGHT WEIGHT USAGE.★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

  • TOP QUALITY INSTRUMENT INC. USA

  • http://www.topqualityinstrument.com/

TRUSS COMBO HEAD POST SCREW

Posted in Chicago screws by

TRUSS COMBO HEAD POST SCREW

8#-32 COMBO HEAD FEMALE POST / BLIND THREAD / STEEL  
A H D F L PART NO.
0.3750 0.0940 0.2030 8#-32 THREAD 3/8″ SB832-38
1/2″ SB832-12
5/8″ SB832-58
3/4″ SB832-34
1″ SB832-12
1.32″ SB832-132

10#-24 COMBO HEAD FEMALE POST / TAPPED THROUGH / STEEL 
A H D F L PART NO.
0.4300 0.1050 0.2440 10#-24 THREAD 1/4″ SB1024-14
3/8″ SB1024-38
1/2″ SB1024-12
5/8″ SB1024-58
3/4″ SB1024-34
1″ SB1024-1
1-1/4″ SB1024-114
1/1-2″ SB1024-112
2″ SB1024-2

1/4#-20 COMBO HEAD FEMALE POST / TAPPED THROUGH / STEEL 
A H D F L PART NO.
0.5630 0.1560 0.3130 1/4-20 THREAD 3/8″ SB1420-38
1/2″ SB1420-12
3/4″ SB1420-34
1″ SB1420-1
1/4″ SB1420-14
1-1/2″ SB1420-112
1-3/4″ SB1420-134
2″ SB1420-2

5/6#-18 COMBO HEAD FEMALE POST / TAPPED THROUGH / STEEL 
A H D F L PART NO.
0.6875 0.1720 0.3750 5/16-18 THREAD 3/8″ SB51618-38
1/2″ SB51618-12
5/8″ SB51618-58
3/4″ SB51618-34
7/8″ SB51618-78
1″ SB51618-1
1-1/4″ SB51618-114
1-1/2″ SB51618-112

8#-32  SCREW COMBO HEAD / STEEL
A H D1 L PART NO.
0.3750 0.0940 8#-32 THREAD 5/16″ SS832-516

10#-24 SCREW COMBO HEAD / STEEL
A H D1 L PART NO.

0.4300

 0.1050 10#-24 THREAD 5/16″ SS1024-516

1/4#-20 SCREW COMBO HEAD / STEEL
A H D1 L PART NO.

0.5625

 0.1563 1/4-20 THREAD 5/16″ SS1420-516

5/16#-18 SCREW COMBO HEAD / STEEL
A H D1 L PART NO.
0.6875 0.1720 5/16-18 THREAD 3/8″ SS51618-38
1/2″ SS51618-12

MATERIAL AVAILABLE FOR TRUSS COMBO HEAD POST SCREW: 
STEEL, STAINLESS STEEL , ALUMINUM, BRASS

★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

TOP QUALITY INSTRUMENT INC. USA

http://www.topqualityinstrument.com/

BINDING POST SCREW / CHICAGO SCREW

Posted in Chicago screws by

BINDING POST SCREW / CHICAGO SCREW

#8-32 FLAT HEAD FEMALE NUT/ BLIND THREAD/ ALUMINUM
A H D F L PART NUMBER
0.394″ 0.078″ 0.197″ 8-32 THREAD 1/4″ AB8321-14
5/16″ AB832-516
3/8″ AB832-38
1/2″ AB832-12
5/8″ AB832-58
3/4″ AB832-34
1″ AB832-1
1 1/4″ AB832-114
1 1/2″ AB832-112
1 3/4″ AB832-134
2″ AB832-2
2 1/4″ AB832-214
2 1/2″ AB832-212
2 3/4″ AB832-234
3″ AB832-3
3 1/4″ AB832-314
3 1/2″ AB832-312
3 3/4″ AB832-334
4″ AB832-4
#8-32 FLAT HEAD FEMALE NUT/ BLIND THREAD/ ALUMINUM
A H D F L PART NUMBER
0.394″ 0.055″ 0.197″ 8-32 THREAD 1/8″ AI8321-18
3/16″ AI832-316
1/4″ AI832-14
3/8″ AI832-38
1/2″ AI832-12
#8-32 EXTENDED SCREW/ALUMINUM
D D1 L L1 F G PART NUMBER
0.197″ 8-32 THREAD 1/4″ 0.2″ 8-32 THREAD 0.433″ AE8321-14
1/2″ AE832-12
3/4″ AI832-34
1″ AE832-1
#8-32 MALE SCREW/ALUMINUM
D D1 L PART NUMBER
0.413″ 8-32 THREAD 3/16″ AM832-316
5/16″ AM832-516

MATERIAL AVAILABLE FOR BINDING POST SCREW:
ALUMINUM

★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

Image

TOP QUALITY INSTRUMENT INC. USA

http://www.topqualityinstrument.com/

TSC 8 BLIND PRESSED NUTS

Posted in Self clinching parts by
TSC 8 BLIND PRESSED NUTS
DIMENSIONS & SPECIFICATIONS
 (MILLIMETERS)
THREAD
SIZE
PART
NO.
BARREL
DIA.
B
MAX.
MIN.
+0.08
-0.00
SHANK
DIA.
C
MAX.
L
MAX.
A
MAX.
E
±0.25
T
±0.25
MIN.
H
DEPTH
FULL
THREAD
MIN.
M3x0.5
3501
3.8
1.0
4.25
4.22
8.5
0.97
6.35
9.6
4.8
5.3
3502
1.4
1.37
M4x0.7
4701
5.2
1.0
5.40
5.38
9.8
0.97
7.95
11.2
6.9
7.1
4702
1.4
1.37
M5x0.8
5801
6.0
1.0
6.40
6.38
9.8
0.97
8.75
11.2
7.1
7.1
5802
1.4
1.37
M6x1.0
6101
7.8
1.4
8.75
8.72
12.7
1.37
11.10
14.3
8.6
7.8
6102
2.3
2.21
DIMENSIONS & SPECIFICATIONS
 (INCH)
THREAD
SIZE
PART
NO.
BARREL
DIA.
B
MAX.
MIN.
+0.003
-0.000
SHANK
DIA.
C
MAX.
L
MAX.
A
MAX.
E
MAX.
T
MAX.
MIN.
H
DEPTH
FULL
THREAD”MIN.
#4-40
4401
0.149
0.040
0.166
0.165
0.335
0.038
0.25
0.38
0.19
0.21
4402
0.056
0.054
#6-32
6321
0.169
0.040
0.187
0.186
0.335
0.038
0.28
0.38
0.22
0.23
6322
0.056
0.054
#8-32
8321
0.204
0.040
0.213
0.212
0.385
0.038
0.31
0.44
0.27
0.28
8322
0.056
0.054
#10-32
10321
0.235
0.040
0.250
0.249
0.385
0.038
0.34
0.44
0.28
0.28
10322
0.056
0.054
1/4-20
4201
0.305
0.056
0.344
0.343
0.500
0.054
0.43
0.56
0.34
0.31
4202
0.090
0.087

ADVANTAGES OF CLINCHING PARTS:

  • PROVIDE STRONG THREADS IN METAL AS THIN AS 020″ / .51 MM.

  • MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.

  • PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.

  • DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.

  • REVERSE SIDE OF METAL SHEET REMAINS FLUSH.

  • NO RETAPPING NECESSARY AFTER APPLICATION.

  • LOW INSTALLED COSTS.

★NUTS：
NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.

★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

TOP QUALITY INSTRUMENT INC. USA

http://www.topqualityinstrument.com/