E-SELF DRIVING NUT

E-SELF DRIVING NUT

 E-SELF DRINV NUT-專門圖2(topquality)

MATERIAL

STEEL, STAINLESS STEEL, BRASS, AND ALUMINUM

ADVANTAGE OF USING E-SELF DRIVING NUT

  • SECURITY
  • LABOUR SAVING
  • FAST & EASY INSTALLATION
  • PERFECT SURFACE OUTLOOK
  • INSTALL INTO VARIES MATERIAL
  • WITHOUT PRODUCING ANY HARMFUL MARK

INSTRUCTIONS OF E-SELF DRIVING NUT

As the sleeve nut is installed, the fangs on the body actually cut into the application & provides grip strength. When screw on the opposite side has driven, the fangs will grip application tightly.

1

FEATURE OF E-SELF DRIVING NUT

(COMPARE WITH SEX BOLTS)

1.    ROUND BODY WITH FANGS ON IT

  • GRIP THE APPLICATION TIGHTLY
  • CANNOT BE DISASSEMBLED EASILY
  • PREVENT ANY ONE WHO INTENT TO PULL OUT

2.    SCREW HEAD CAN BE YOUR CHOICE

  • THE SCREW HEAD CAN BE TAMPERPROOF
  • HARDLY TO DISASSEMBLED
  • COMBINE WITH GOOD SURFACE OUTLOOK

E-SELF DRINV NUT-專門圖1(topquality)

5

DOUBLE EFFECT OF ANTI-THEFT

YOUR BEST CHOICE

Page0001

Advertisements

GLASS BREAKER

GLASS BREAKER

THE BEST EQUIPMENT FOR ESCAPE

A IDEAL SAFETY DEVICE USED IN VEHICLES, HOME OR WORK PLACE TO BREAK THROUGH WINDOW GLASS IN AN EMERGENCY.

THIS ITEM WE DESIGN IT GOING TO BE USED IN THE BUS, CAR, BUILDING (ESPECIALLY FOR OFFICE BUILDING)..ETC.

GLASS BREAKER(topquality)

USUALLY THE “GLASS BREAKER” IS FORM AS A PIN AND HUGE STRENGTH MIGHT BE NEEDED WHEN USING, HOWEVER, OUR INVENTION IS TO BE DESIGNED AS “PUSH DOWN” FUNCTION WHICH IS EASY WHEN PEOPLE DURING EMERGENCY SITUATION.

FEATURES:

  • PRACTICAL FOR CAR USE IN EMERGENCY
  • SMASHING WINDOW EASY & QUICKLY
  • STRONG DESTRUCTION
  • HIGH QUALITY

COMPARE:

NORMAL –

 EMERGENCY HAMMER

OUR PRODUCT –

GLASS BREAKER

  • NEED TAKE TIME TO FIND TOOLS
  • NEED POUND FOUR CORNERS OF THE WINDOW, THEN THUMP THE CENTER
  • HARDLY TO OPERATE
  • TOO HEAVY, EASILY TO HURT USERS
  • EASILY TO BE STOLEN
  • ALWAYS IN THE VISIBLE PLACE
  • JUST “PUSH DOWN” THE TOOL
  • EASY & FAST TO OPERATE
  • CANNOT INJURE USERS
  • SUITABLE FOR ALL AGES

TSC6 SELF CLINCHING STUD

(nnovacera / bolts and nuts / screw / fastener)

SELF CLINCHING PARTS

SELF CLINCHING STUD

TSC6

1(topquality) 2

MATERIAL: STEEL

PLATING: ZINC PLATED

ADVANTAGES OF CLINCHING PARTS:

1. PROVIDE STRONG THREADS IN METAL AS THIN AS 020″ / .51 MM.
2. MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
3. PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
4. DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
5. REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
6. NO RETAPPING NECESSARY AFTER APPLICATION.
7. LOW INSTALLED COSTS.

 STUDS

EXTERNALLY THREADED FASTENERS WHICH ARE USED WHERE THE ATTACHMENT MUST BE POSITIONED BEFORE BEING FASTENED.

3(topquality) 4(topquality)

TSC4 SELF CLINCHING NUTS

SELF CLINCHING PART

SELF CLINCHING NUTS

TSC4 SERIES

1(topquality) DOC122112

ADVANTAGES OF CLINCHING PARTS:

  •    PROVIDE STRONG THREADS IN METAL AS THIN AS 020″ / .51 MM.
  •    MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
  •    PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
  •    DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
  •    REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
  •    NO RETAPPING NECESSARY AFTER APPLICATION.
  •    LOW INSTALLED COSTS.

 – NUTS

NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.

4(topquality)

TSC1 SELF CLINCHING STANDOFF

SELF CLINCHING PARTS

SELF CLINCHING STANDOFF

TSC1 SERIES

1(topquality)

MATERIAL AVAILABLE FOR SELF CLINCHING STANDOFFS:

STEEL, STAINLESS STEEL, ALUMINUM

ADVANTAGES OF CLINCHING PARTS:

  • PROVIDE STRONG THREADS IN METAL AS THIN AS 020″ / .51 MM.
  • MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
  • PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
  • DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
  • REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
  • NO RETAPPING NECESSARY AFTER APPLICATION.
  • LOW INSTALLED COSTS.

 – STANDOFFS 

USED WHERE IT IS NECESSARY TO STACK OR SPACE COMPONENTS AWAY FROM THE PANEL. THRU-THREADED OR BLIND TYPES ARE GENERALLY STANDARD.

-OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

3(topquality) 4(topquality)

BLIND JACK NUTS

BLIND JACK NUTS

TJM & TJU SERIES

3(topquality)

THE BLIND JACK NUT IS AN ECONOMICAL BLIND FASTENER DESIGNED FOR ASSEMBLY LIND USE IN THIN, SOFT OR BRITTLE MATERIALS. WHEN TIGHTENED, THEIR BODY COLLAPSES TO FORM LEGS WHICH GRIP THE INSIDE OF THE MOUNTING SURFACE, LEAVING A PERMANENT REUSABLE THREADED INSERT. STANDARD BLIND JACK NUT ARE MANUFACTURED OF STEEL WITH A COMMERCIAL ZINC PLATING. ALL BLIND JACK NUTS CAN BE SUPPLIED WITH BRASS COATED WHICH ASSIST GALVANIC CORROSION CONCERNS.

MATERIAL AVAILABLE FOR BLIND JACK NUT: 
STEEL, STAINLESS STEEL

FEATURES:

  • FASTENS IN BLIND HOLES
  • FASTENS SECURELY DESPITE BURRS & UNEVEN SUBSTRATES
  • NOT HOLE SIZE SENSITIVE
  • SUITABLE FOR WIDE GRIP RANG

APPLICATIONS:

  • SPOILERS AND OTHER AERODYNAMIC DEVICES
  • LICENCE PLATE BRACKETS
  • HIGH-LAMP STOP LIGHTS
  • AIR CONDITIONING CONDENSERS
  • GLOVE COMPARTMENTS
  • SPEAKER HOUSINGS
  • LATH MOUNTINGS
  • TRUCK UTILITY COMPARTMENTS
  1. THREAD INSRT ONTO THE MANDREL OF INSTALLATION TOOL, THEN INSERT ALL THE WAY INTO PREDRILLED HOLE UNTIL FLANGE IS FIRMLY AGAINST MOUNTING SURFACE.
    2-1(topquality)
  2. FULLY COLLASPE INSERT, THEN REMOVE TOOL.
    2-2(topquality)
  3. PASS MACHINE SCREW THROUGH PART TO BE FASTENED, THEN TIGHTEN UNTIL SUNG.
    2-3(topquality)

– OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

BLIND JACK NUT TOOL 

AN ECONOMICAL, EASY TO USE TOOL FOR LOW-VOLUME INSTALLATION IN ANY MATERIAL. THREAD PULL-ROD INTO BLIND JACK NUT, INSERT INTO HOLE, AND SQUEEZE HANDLES TO SET. INTERCHANGEABLE PULL-OUT RODS AVAILABLE TO SET ALL SIZES. PNEUMATIC BLIND JACK NUT TOOL ALSO AVAILABLE.

JACK-NUT-SMALL(topquality)

1(topquality)

STRETCH FOLDING BLIND RIVET

STRETCH FOLDING BLIND RIVET

TS SERIES

 1(topquality) 3(topquality)

MATERIAL AVAILABLE FOR STRETCH FOLDING BLIND RIVETS: 

RIVET BODY MATERIAL : ALUMINUM 5052.

MANDREL MATERIAL : ALUMINUM 5056.

POSITIVE MANDREL RETENTION :

RATTLE FREE FASTENER

CORROSION RESISTANT:

ALL ALUMINUM CONSTRUCTION

MULTI GRIP:

  • ADJUSTS TO A WIDE VARIATION OF SUBJECT’S THICKNESS.
  • FINISH AVAILABLE IN A MULTIPLE OF COLOR.

SUITABLE APPLICATIONS:

  • SUPPORTS BRITTLE, THIN SOFT OR DUCTILE MATERIALS AND FUNCTIONS WHEN USED WITH OVERSIZED, MISALIGNED OR IRREGULARLY SHAPED HOLES.
  • THE STRETCH FOLDING BLIND RIVET FORMS THREE LARGE FOLDING LEGS THAT CREATE EXCELLENT CLAMPING-UP AND A LARGE BLIND SIDE BEARING SURFACE.

2(topquality)