E SELF-DRIVING NUT

E SELF-DRIVING NUT

E SELF-DRIVING NUT

  DIMENSIONS & SPECIFICATION                                                        (MILLIMETERS)
THREAD SIZE P/N. A D
±0.015
L
±0.3
C d THREAD DEPTH NIN HOLE SIZE
±0.1
M5PH0.8 ESNM512 11mm 6.2mm 12mm 5mm 7.7mm 8mm 6.5mm
ESNM516 11mm 6.2mm 16mm 5mm 7.7mm 12mm 6.5mm
ESNM520 11mm 6.2mm 20mm 5mm 7.7mm 16mm 6.5mm
ESNM524 11mm 6.2mm 24mm 5mm 7.7mm 20mm 6.5mm
M6PH1.0 ESNM612 15mm 7.8mm 12mm 5mm 9.6mm 8mm 8.1mm
ESNM616 15mm 7.8mm 16mm 5mm 9.6mm 12mm 8.1mm
ESNM620 15mm 7.8mm 20mm 5mm 9.6mm 16mm 8.1mm
ESNM624 15mm 7.8mm 24mm 5mm 9.6mm 20mm 8.1mm
M8PH1.0 ESNM812 17mm 9.45mm 12mm 5mm 11.25mm 8mm 9.75mm
ESNM816 17mm 9.45mm 16mm 5mm 11.25mm 12mm 9.75mm
ESNM820 17mm 9.45mm 20mm 5mm 11.25mm 16mm 9.75mm
ESNM824 17mm 9.45mm 24mm 5mm 11.25mm 20mm 9.75mm
DIMENSIONS&SPECIFICATION                                                                          (INCH)
THREAD SIZE P/N. A D
±0.006
L
±0.012
C d THREAD DEPTH NIN HOLE SIZE
±0.003
10-24 ESNI512 0.433″ 0.244″ 0.5″ 0.197″ 0.303″ 0.34″ 0.255″
ESNI516 0.433″ 0.244″ 0.625″ 0.197″ 0.303″ 0.47″ 0.255″
ESNI520 0.433″ 0.244″ 0.75″ 0.197″ 0.303″ 0.59″ 0.255″
ESNI524 0.433″ 0.244″ 1″ 0.197″ 0.303″ 0.84″ 0.255″
1/4-20 ESNI612 0.563″ 0.308″ 0.5″ 0.197″ 0.378″ 0.34″ 0.311″
ESNI616 0.563″ 0.308″ 0.625″ 0.197″ 0.378″ 0.47″ 0.311″
ESNI620 0.563″ 0.308″ 0.75″ 0.197″ 0.378″ 0.59″ 0.311″
ESNI624 0.563″ 0.308″ 1″ 0.197″ 0.378″ 0.84″ 0.311″
5/16-18 ESNI812 0.687″ 0.375″ 0.5″ 0.197″ 0.445″ 0.34″ 0.378″
ESNI816 0.687″ 0.375″ 0.625″ 0.197″ 0.445″ 0.47″ 0.378″
ESNI820 0.687″ 0.375″ 0.75″ 0.197″ 0.445″ 0.59″ 0.378″
ESNI824 0.687″ 0.375″ 1″ 0.197″ 0.445″ 0.84″ 0.378″

 

 

MATERIAL AVAILABLE:
STEEL, STAINLESS STEEL AND BRASS

THE E SELF-DRIVING NUT OFFERS THE FOLLOWING ADVANTAGES:

  • INSTALL SLEEVE NUT TO ACCESS FRONT SIDE OF THE WORK PIECE &SCREW IN FROM BACK SIDE
  • INSTALL WITHOUT ANY COMPLICATED TOOL AT ANY LOCATION ON THE ASSEMBLY
  • INSTALL WITHOUT PRODUCING ANY HARMFUL MARK
  • INSTALL INTO VARIES MATERIAL
  • THE FANGS ON THE BODY CUT INTO THE APPLICATION DURING ASSEMBLY
  • EASY, FAST & SAFE INSTALLATION

AS THE SLEEVE NUT IS INSTALLED, THE FANGS ON THE BODY ACTUALLY CUT INTO THE APPLICATION & PROVIDES GRIP STRENGTH. WHEN SCREW ON THE OPPOSITE SIDE HAVE DRIVEN, THE FANGS WILL GRIP APPLICATION TIGHTLY. THE HEAD DRIVE OF SCREW CAN BE TAMPERPROOF OF CUSTOMER’S CHOICE.

★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST  

TOP QUALITY INSTRUMENT INC. USA

 http://www.topqualityinstrument.com/

Advertisements

SIX LOBE WITH PIN SEX BOLTS

SIX LOBE WITH PIN SEX BOLTS

FEMALE NUT

A±0.008 H±0.008 D±0.004 L±0.01 G±0.02 THREAD
0.425 0.125 0.245 0.5 0.377 10-24
0.425 0.125 0.245 0.625 0.5 10-24

(IN INCH)

MALE SCREW

A±0.008 H±0.008 D1±0.003 L±0.01 L1±0.008 THREAD
0.425 0.125 0.236 3/4 0.27 10-24
0.425 0.125 0.236 15/16 0.27 10-24
0.425 0.125 0.236 1 1/16 0.27 10-24
0.425 0.125 0.236 1 3/16 0.27 10-24
0.425 0.125 0.236 1 5/16 0.27 10-24
0.425 0.125 0.236 1 3/8 0.27 10-24

(IN INCH)

MATERIAL AVAILABLE FOR SIX LOBE WITH PIN SEX BOLTS: 
STEEL, STAINLESS STEEL , ALUMINUM, BRASS

ADOPT SPECIAL HEAD TYPE AND PUNCH ON THE DESIGN IN SCREW, HAVE SAFE, GUARD TAKE APART AND THEFT, OFFR FUNCTION PROTECTED TO DESTROY TO DEFENDING. GENERAL WRENCH SET IS ALL UNABLE TO DISMANTLE SUCH AS CROSS, STRAIGHT-LINE HEX KEY, TORX KEY ETC.

★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

TOP QUALITY INSTRUMENT INC. USA

http://www.topqualityinstrument.com/

ONE WAY SEX BOLTS

ONE WAY SEX BOLTS

FEMALE NUT

A±0.008 H±0.011 D±0.004 L±0.01 G±0.02 THREAD
0.4375 0.12 0.245 0.625 0.5 10-24
0.4375 0.12 0.245 0.5 0.37 10-24

(IN INCH)

MALE SCREW

TYPE A±0.008 H±0.01 D1±0.004 D2±0.004 L±0.01 L1±0.008 L2±0.02 L3±0.02 THREAD
B 0.437 0.12 0.25 0.5 0.13 0.37 10-24
B 0.437 0.12 0.25 0.75 0.27 0.48 10-24
B 0.437 0.12 0.25 0.937 0.27 0.667 10-24
A 0.437 0.12 0.25 0.185 1.06 0.27 0.22 0.57 10-24
A 0.437 0.12 0.25 0.185 1.19 0.27 0.22 0.70 10-24
A 0.437 0.12 0.25 0.185 1.31 0.27 0.22 0.821 10-24

(IN INCH)

MATERIAL AVAILABLE FOR ONE WAY SEX BOLTS: 
STEEL, STAINLESS STEEL , ALUMINUM, BRASS

★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

Image

TOP QUALITY INSTRUMENT INC. USA

http://www.topqualityinstrument.com/

SELF TAPPING THREADED INSERT W. THREE CUTTING HOLE

SELF TAPPING THREADED INSERT
W. THREE CUTTING HOLE

THIN WALL SECTION/ 薄壁

INCH SIZE INCH P/N. METRIC SIZE METRIC P/N. EXTERNAL THREAD LENGTH HOLE SIZE HOLE DEPTH
INTERNAL THREAD(d1) d2(mm) P(mm) L +0.003″
-0.000″
4-40 TS30440 M3 TSB30030 4.50 0.50 0.157″ 0.157″ 0.236″
4-40 TS30440L M3 TSB30030L 4.50 0.50 0.236″ 0.157″ 0.315″
6-32 TS30632 M3.5 TSB30035 5.00 0.60 0.197″ 0.177″ 0.276″
6-32 TS30632L M3.5 TSB30035L 5.00 0.60 0.315″ 0.177″ 0.394″
8-32 TS30832 M4 TSB30470 6.00 0.70 0.236″ 0.216″ 0.315″
8-32 TS30832L M4 TSB30470L 6.00 0.70 0.315″ 0.216″ 0.394″
10-32 TS301032 M5 TSB30580 6.50 0.80 0.276″ 0.236″ 0.354″
10-32 TS301032L M5 TSB30580L 6.50 0.80 0.394″ 0.236″ 0.512″
1/4-20 TS30420 M6 TSB30610 8.00 1.00 0.315″ 0.291″ 0.394″
1/4-20 TS30420L M6 TSB30610L 8.00 1.00 0.472″ 0.291″ 0.591″
5/16-18 TS30518 M8 TSB308125 10.00 1.25 0.354″ 0.366″ 0.433″
5/16-18 TS30518L M8 TSB308125L 10.00 1.25 0.551″ 0.366″ 0.669″
3/8-16 TS30616 M10 TSB301015 12.00 1.50 0.394″ 0.437″ 0.512″
3/8-16 TS30616L M10 TSB301015L 12.00 1.50 0.709″ 0.437″ 0.866″
7/16-14 TS3071614 M12 TSB301275 14.00 1.75 0.472″ 0.516″ 0.590″
7/16-14 TS3071614L M12 TSB301275L 14.00 1.75 0.866″ 0.516″ 1.024″
1/2-13 TS301213 M14 TSB301420 16.00 2.00 0.551″ 0.590″ 0.669″
1/2-13 TS301213L M14 TSB301420L 16.00 2.00 0.945″ 0.590″ 1.102″
5/8-11 TS305811 M16 TSB301620 18.00 2.00 0.551″ 0.669″ 0.669″
5/8-11 TS305811L M16 TSB301620L 18.00 2.00 0.945″ 0.669″ 1.102″

MATERIAL AVAILABLE FOR SELF TAPPING THREADED INSERT W. THREE CUTTING HOLE: 
ALUMINUM/ALUMINUM ALLOY/STEEL/STAINLESS STEEL/BRASS

FOR USE IN THIN WALL OR CLOSE TO AN EDGE 

ADVANTAGE OF SELF TAPPING THREADED INSERT:

  • HIGH PULL-OUT STRENGTH
  • HIGH TORQUE RESISTANCE
  • STRONG WEAR RESISTANCE THREAD
  • FAST, EASY INSTALLATION
  • EXTREME VIBRATION RESISTANCE

★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

  

TOP QUALITY INSTRUMENT INC. USA

http://www.topqualityinstrument.com/

SELF TAPPING THREADED INSERT SERIES-THREE HOLE W. GROOVED PIN

SELF TAPPING THREADED INSERT SERIES-THREE HOLE W. GROOVED PIN

THREE HOLE W. GROOVED PIN
3HOLE-PIN
W. GROOVED PIN
MATERIAL AVAILABLE FOR SELF TAPPING THREADED INSERT W. GROOVED PIN
ALUMINUM/ALUMINUM ALLOY/STEEL/STAINLESS STEEL/BRASS
FOR USE IN THIN WALL OR CLOSE TO AN EDGE
ADVANTAGE OF SELF TAPPING THREADED INSERT:1. HIGH PULL-OUT STRENGTH
2. HIGH TORQUE RESISTANCE
3. STRONG WEAR RESISTANCE THREAD
4. FAST, EASY INSTALLATION
5. EXTREME VIBRATION RESISTANCE
★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
 It could be used in car engine

SELF TAPPING THREAD INSERTS-SLOTTED SERIES

SELF TAPPING THREAD INSERTS-SLOTTED SERIES

Inner ThreadH Outside ThreadD Length Drilling Diameter inConsultation MinimumDrilling Depth
AThe Meter System The Metric

System

External Diameter PH (L) Plastic Aluminum Cast Iron
M2.5 #2 4.5 0.5 6 4.0-4.1 4.1-4.2 4.2-4.3 8
M3 #4 5 0.5 6 4.5-4.6 4.6-4.7 4.7-4.8 8
M3.5 #6 6 0.75 8 5.3-5.4 5.5-5.6 5.6-5.7 10
M4 #8 6.5 0.75 8 5.8-5.9 6.0-6.1 6.1-6.2 10
M5 #10 8 1 10 7.1-7.2 7.3-7.5 7.5-7.6 13
M6(a) #12 9 1 12 8.1-8.2 8.3-8.5 8.5-8.6 15
M6 #1/4″ 10 1.5 14 9.0-9.2 9.2-9.3 9.3-9.4 17
M8 #5/16″ 12 1.5 15 10.6-10.8 11.0-11.2 11.2-11.4 18
M10 #3/8″ 14 1.5 18 12.6-12.8 13.0-13.3 13.2-13.4 22
M12 #7/16″ 16 1.5 22 14.6-14.8 15.0-15.3 15.2-15.4 26
M14 #1/2″ 18 1.5 24 16.6-16.8 17.0-17.3 17.2-17.5 28
M16 #5/8″ 20 1.5 22 18.6-18.8 19.0-19.3 19.2-19.5 27
M18 22 1.5 24 20.6-2.8 21.0-21.3 21.1-21.5 29
M20 26 27 24.6-24.8 25.0-25.3 25.2-25.5 32
M22 #3/4″ 26 1.5 30 24.6-24.8 25.0-25.3 25.2-25.5 36
M24 #7/8″ 30 1.5 30 28.6-28.8 29.0-29.3 29.2-29.5 36
M27 34 1.5 30 32.6-32.8 33.0-33.3 33.2-33.5 36
M30 4636 40 34.6-34.8 35.0-35.3 35.2-35.5 46

MATERIAL AVAILABLE FOR SELF TAPPING THREAD INSERTS-SLOTTED SERIES: 
STEEL, STAINLESS STEEL 303(A1), STAINLESS STEEL 316(A4/18-10), BRASS C3604

FINISH FOR STEEL PARTS OF SELF TAPPING TGHREADED INSERT:
CR3 WHITE/YELLOW ZINC PLATED

CHARACTERISTICS OF SELF TAPPING THREADED INSERTS:

  • SELF TAPPING THREADED INSERTS ARE EASY TO INSTALLED,
  • SELF TAPPING THREADED INSERTS ARE DESIGNED TO REPLACE SPRING COIL.
  • SELF TAPPING THREADED INSERTS PROVIDE STRONG THREADS FOR WEAK MATERIAL LIKE ALUMINUM OR PLASTIC.
  • SELF TAPPING THREADED INSERTS ARE ABLE TO INSTALL FOR VIBRATING ENVIRONMENT.

APPICATIONS OF SELF TAPPING THREADED INSERTS:

  • SELF TAPPING THREADED INSERTS CAN BE APPLIED TO DIFFERENT MATERIAL SUCH AS PLASTIC, ALUMINUM, CAST IRON.
  • SELF TAPPING THREADED INSERTS ARE DESIGNED TO APPLY IN WEAK MATERIAL WHERE THREADS ARE FREQUENTLY USED.

★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

TOP QUALITY INSTRUMENT INC. USA

http://www.topqualityinstrument.com/

BOLT (SCREW) RIVET NUT

BOLT (SCREW) RIVET NUT

 BOLT (SCREW) RIVET NUT IN ISO DIMENSION (MM)

   ISL (INSTALLED STUDdIMENSION) IS BASED ON MAX. GRIP INSTALLATION.TO CALCULATE THE ACTUAL ISL IN A SPECIFIC GRIP, PLEASE REFER TO THE FORMULA BELOW:

MAX.GRIP – ACTUAL GRIP = GRIP DIFFERENCE.

ISL + GRIP DIFFERENCE = ACTUAL ISL 

 BOLT (SCREW) RIVET NUT IN ISO DIMENSION (MM)
PARTNUMBER THREAD ISO GRIP RANGE (MM) HOLESIZE+0,15

-0,00

HD±0,25

±.064*

HH±0,08 L±0,50 DMAX. ILMAX. STUD LENGTHS MIN. TOOLRPM DYNAMICAIR PRESSURE

SETTINGS BARS 

ISL CALL OUT
TSBS 470-B M4X0,7 0,50-2,00 6.,75 9,91 0,76 12,32 6,73 9,15 12,0 15,0 20,0 3000 4.8 – 5.5
12 15 20
TSBS 470-BL M4X0,7 2,00-3,30 6,75 9,91 0,76 13,59 6,73 9,15 10,7 13,7 18,7 3000 4.8 – 5.5
10.7 13.7 18.7
TSBS 580-B M5X0,8 0,50-3,30 7,60 10,54 0,76 13,84 7,52 9,65 12,0 15,0 20,0 1500 4.1 – 5.5
12 15 20
TSBS 580-BL M5X0,8 3,30-5,70 7,60 10,54 0,76 16,64 7,52 9,65 9,6 12,6 17,6 150 4.1 – 5.5
9.66 12.6 17.6
TSBS 610-B M6X1,0 0,70-4,20 10,00 12,70 0,76 17,02 9,91 11,81 15,0 20,0 25,0 900 5.5 – 6.2
15 20 25
TSBS 610-BL M6X1,0 4,20-6,60 10,00 12,70 0,76 19,56 9,91 11,81 12,6 17,6 22,6 900 5.5 – 6.2
12.6 17.6 22.6
TSBS 8125-B M8X1,25 0,70-3,8 13,50 17,40* 0,89 20,57 13,46 14,10 16,0 22,0 28,0 600 5.5 – 7.5
16 22 28
TSBS 8125-BL M8X1,25 3,8-7,90 13,50 17,40* 0,89 23,50 13,46 12,96 11,9 17,9 23,9 600 5.5 – 7.5
11.9 17.9 23.9
TSBS 1015-B M10X1,5 0,70-3,8 13,50 17,40* 0,89 20,57 13,46 14,10 20,0 25,0 30,0 600 5.5 – 7.5
20 25 30
TSBS 1015-BL M10X1,5 3,8-7,90 13,50 17,40* 0,89 23,50 13,46 12,96 15,9 20,9 25,9 600 5.5 – 7.5
15.9 20.9 25.9

BOLT (SCREW)

RIVET NUT IN UNC DIMENSION (INCH)

   ISL (INSTALLED STUDdIMENSION) IS BASED ON MAX. GRIP INSTALLATION.TO CALCULATE THE ACTUAL ISL IN A SPECIFIC GRIP, PLEASE REFER TO THE FORMULA BELOW:

MAX.GRIP – ACTUAL GRIP = GRIP DIFFERENCE.

ISL + GRIP DIFFERENCE = ACTUAL ISL 

BOLT (SCREW) RIVET NUT IN NUC DIMENSION (INCH)
PARTNUMBER THREADUNC GRIP RANGE (INCH) HOLE SIZE+.006″

-.000″

HD±.010

±.025*

HH±.003 L±.020 DMAX. ILMAX. STUD LENGTHS MIN. TOOLRPM DYNAMICAIR PRESSURE

SETTINGS PSI

ISL CALL OUT
TSBS632-B 6-32 .020-.080  17/64(.2656)  .390  .030  .485  .265  .360  .500  .625  .750  3000  70 – 80
 500  625  750
TSBS632-BL 6-32  .080-.130  17/64(.2656)  .390  .030  .535  .265  .360  .450  .575 .700  3000  70 – 80
 450  575 700
TSBS832-B 8-32  .020-.080  17/64(.2656)  .390  .030  .485  .265  .360  .500  .625  .750  3000  75 – 90
 500  625  750
TSBS832-BL 8-32  .080-.130  17/64(.2656)  .390  .030  .535  .265  .360  .450  .575  .700  3000  75 – 90
 450  575  700
TSBS1024-B 10-24  .020-.130  19/64(.2969) .415  .030  .545  .296  .380  .500  .625  .750 1500 60 – 80
 500  625  750
TSBS1024-BL 10-24  .130-.225  19/64(.2969) .415  .030  .655  .296  .380  .405  .530  .655  1500 60 – 80
 405  530  655
TSBS1032-B 10-32  .020-.130  19/64(.2969) .415  .030  .545  .296  .380  .500  .625  .750  1500 60 – 80
 500  625  750
TSBS1032-BL 10-32  .130-.225  19/64(.2969) .415  .030  .655  .296  .380  .405  .530  .655  1500 60 – 80
 405  530  655
TSBS420-B 1/4-20  .027-.165  25/64(.3906)  .500  .030  .670  .390  .465  .625  .8125  1.000  900  70 – 90
 625  8125  1000
TSBS420-BL 1/4-20  .165-.260  25/64(.3906) .500  .030  .770  .390  .465  .530  .7175  .905  900  70 – 90
 530  7175  905
TSBS518-B 5/16-18  .027-.150  17/32(.5312)  .685*  .035  .810  .530  .555  .625  .875  1.125  600  80 – 110
 625  875  1125
TSBS518-BL 5/16-18  .150-.312  17/32(.5312)  .685*  .035  .925  .530  .510  .463  .713  .963  600  80 – 110
 463  713  963
TSBS616-B 3/8-16  .027-.150  17/32(.5312)  .685* .035  .810  .530  .555 .750  1.000  1.250  600  80 – 110
 750  1000  1250
TSBS616-BL 3/8-16  .150-.312  17/32(.5312)  .685*  .035  .925  .530  .510 .588  .838  1.088  600  80 – 110
588  838  1088

MATERIALS ARE AVAILABLE FOR BOLT RIVET NUT:

STAINLESS STEEL 302/304 (A2/18-8), 316(A4/18-10), STEEL, ALUMINUM 5056/6061, BRASS C2600

CHARACTERISTCS OF BOLT (SCREW) RIVET NUT:

  • BOLT (SCREW) RIVET NUT IS EASY AND FAST IN INSTALLATION WITH HANDY TOOL.
  • BOLT (SCREW) RIVET NUT PROVIDES HIGH TORQUE AND STRONG THREADS IN COMPARING WITH NORMAL FASTENERS.
  • WELDING PROCESS IN NOT REQUIRED IN INSTALLING BOLT (SCREW) RIVET NUT.
  • BOLT (SCREW) RIVET NUT IS ABLE TO REDUCE ASSEMBLING TIME AND IMPROVE OUTPUT.
  • BOLT (SCREW) RIVET NUT IS ABLE TO PROVIDE A STRONG BINDING SUPPORT ON COMBINATION APPLICATIONS.
  • BOLT (SCREW) RIVET NUT WILL NOT LOOSEN FROM VIBRATING OBJECTS ONCE ITS’ INSTALLED.
  • BOLT (SCREW) IS ALREADY COMBINED WITH BLIND RIVET NUT BEFORE INSTALLATION, SO IT IS NOT NECESSARY TO INSTALL THE SCREW ON THE BLIND RIVET NUT.
  • BOLT (SCREW) AND BLIND RIVET NUT IS COMBINED RIGIDLY TO SUIT VIBRATING ENVIRONMENT.
  • BOLT (SCREW) RIVET NUTS ARE AVAILABLE IN BOTH UNC AND ISO DIMENSION.

★OTHER SIZES AVAILABLE:

TOP SCREW IS ABLE TO MANUFACTURE OTHER SIZES OF BOLT (SCREW) RIVET NUT APART FROM THE SIZES SHOWN IN TABLE BELOW. TOP SCREW IS ABLE TO MANUFACTURE BOLT (SCREW) RIVET NUT BASED ON THE STANDARD CYLINDRICAL, FULL HEXAGONAL AND HALF HEXAGONAL BLIND RIVET NUT IN TOP SCREW’S CATALOG. TOP SCREW IS ALSO CAPABLE FOR CUSTOMIZED SCREW (BOLT) RIVET NUT TO FULFILL YOUR REQUIREMENT FROM DESIGNING, RECOMMENDING AND OF COURSE MANUFACTURING.

NOTE 1: GRIP RANGE CAN BE AFFECTED BY PARENT MATERIAL DENSITY AND ACTUAL HOLE SIZE. WE SUGGEST TRIAL INSTALLATIONS TO DETERMINE OPTIMUM GRIP.

NOTE 2: ADDITIONAL UNF FINE THREADS, GRIP LENGTHS AND MATERIALS ARE AVAILABLE. PLEASE CONTACT TOP SCREW METAL CORP. FOR MORE DETAIL.

THREAD SPECIFICATION: Unified – 2A/21 per ASME B1.1  

                                              Metric ­– 6g/21 per ASME 1.21M

 TOP QUALITY INSTRUMENT INC. USA

http://www.topqualityinstrument.com/