BINDING POST SCREWS / CHICAGO SCREW

BINDING POST SCREWS / CHICAGO SCREW

 

MATERIAL AVALIABLE：

ALUMINUM、BRASS、STAINLESS STEEL

 

SURFACE FINISH AVALIABLE：

CLEAN

 

GREAT CHOICE FOR SWATCH BOOKS, ARCHITECTURAL AND ENGINEERING DRAWINGS, OR ANY APPLICATION WHERE LOOSE SHEETS NEED TO BE KEPT TOGETHER.

 

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

翼型螺帽 E SELF-DRIVING NUT

翼型螺帽

E SELF-DRIVING NUT

翼型螺帽之材質：
鐵、白鐵、銅。

MATERIAL AVALIABLE: 

STEEL, STAINLESS STEEL AND BRASS

 

翼型螺帽有以下優點：

   * 於安裝時將螺帽置於物件前方，螺絲置於物件後方

   * 以簡易的工具即可於任何地點安裝翼型螺帽

   * 安裝翼型螺帽時不會對物件造成損傷

   * 翼型螺帽可安裝於多種材質之物件

   * 翼型螺帽上的牙會於安裝時崁入物件

   * 翼型螺帽安裝容易、快速、省力且安全

   * 可於翼型螺帽的前端刻印公司LOGO

ADVANTAGES:

   * INSTALL SLEEVE NUT TO ACCESS FRONT SIDE OF THE WORK PIECE & SCREW IN FROM BACK SIDE.

   * INSTALL WITHOUT ANY COMPLICATED TOOL AT ANY LOCATION ON THE ASSEMBLY.

   * INSTALL WITHOUT PRODUCING ANY HARMFUL MARK.

   * INSTALL INTO VARIES MATERIAL.

   * THE FANGS ON THE BODY CUT INTO THE APPLICATION DURING ASSEMBLY.

   * EASY, FAST & SAFE INSTALLATION.

 

操作說明：

安裝翼型螺帽時，螺帽上的牙會崁入物件，並且產生咬合的力道，當螺絲從反方向轉入時，牙會緊緊咬住物件。

INSTRUCTIONS OF E-SELF DRIVING NUT:

AS THE SLEEVE NUT IS STALLED, THE FANGS ON THE BODY ACTUALLY CUT INTO THE APPLICATION & PROVIDES GRIP STRENGTH. WHEN SCREW ON THE OPPOSITE SIDE HAVE DRIVEN, THE FANGS WILL GRIP APPLICATION TIGHTLY.

翼型螺帽的特色：（相較於公母套）

1.  設計：螺帽在螺身上有牙

        * 可緊緊的咬住物件

        * 不容易被拆解

        * 防止有人意圖拔出

2.   螺絲的頭型可供選擇

        * 螺絲頭可以是防盜的樣式

        * 難以拆解

        * 結合完美的外觀

FEATURE OF E-SELF DRIVING NUT

(COMPARE WITH SEX BOLTS)

1.    ROUND BODY WITH FANGS ON IT

        * GRIP THE APPLICATION TIGHTLY

        * CANNOT BE DISASSEMBLED EASILY

        * PREVENT ANY ONE WHO INTENT TO PULL OUT

2.    SCREW HEAD CAN BE YOUR CHOICE

        * THE SCREW HEAD CAN BE TAMPERPROOF

        * HARDLY TO DISASSEMBLED

        * COMBINE WITH GOOD SURFACE OUTLOOK 

雙重的防盜效果

你的最佳選擇

DOUBLE EFFECT OF ANTI-THEFT

YOUR BEST CHOICE

★ 其他尺寸和材質可依客戶要求訂製。

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST　

Binding Post Screw

Binding Post also call Chicago screws, Chicago screw posts, bookbinding screws are great for binding your documents. 

Using one or two holes can replace binders and save precious space when archiving your documents.

Place a chicago screw in the corner of your marketing material for a smart, economical and elegant finish.

ALUMINUM BLINDING POST SCREW

BRASS BLINDING POST SCREW

TRUSS COMBO HEAD POST SCREW – 1

TRUSS COMBO HEAD POST SCREW – 2

ONE WAY SEX BOLTS

SIX LOBE WITH PIN OR WITHOUT PIN SEX BOLTS

NEW PRODUCT

E SELF-DRIVING NUT

MULTIGRIP BLIND RIVET

BLIND THREADED RIVET

HIGH STRENGTH

MULTIGRIP BLIND RIVET

TM SERIES

MATERIAL AVAILABLE FOR MULTI-GROP BLIND RIVETS: 

RIVET BODY MATERIAL : ALUMINUM 5052.

MANDREL MATERIAL : STEEL / ZINC PLATED.

SUITABLE APPLICATION:

• AUTOMOBILES, MOTORCYCLES, ELECTRICAL APPLIANCES, LIGHTING FIXTURES, ETC.

• MAKES THE GAP OF JOINING OBJECTS EXPAND FIRST THEN RIVETS THEM CLOSELY.

• IT WILL NOT BE LOOSENED BY SHANK.

• THE INNER AND OUTER JOINS ARE GOOD LOOKING.

• HELPS REDUCE STOCK RANGE.

• PARTICULAR DOME HEADS ACCEPTABLE.

• FINISH AVAILABLE IN A MULTIPLE OF COLORS.

–OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

TSC4 SELF CLINCHING NUTS

SELF CLINCHING PART

SELF CLINCHING NUTS

TSC4 SERIES

ADVANTAGES OF CLINCHING PARTS:

•    PROVIDE STRONG THREADS IN METAL AS THIN AS 020″ / .51 MM.

•    MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.

•    PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.

•    DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.

•    REVERSE SIDE OF METAL SHEET REMAINS FLUSH.

•    NO RETAPPING NECESSARY AFTER APPLICATION.

•    LOW INSTALLED COSTS.

 – NUTS

NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.

TSC1 SELF CLINCHING STANDOFF

SELF CLINCHING PARTS

SELF CLINCHING STANDOFF

TSC1 SERIES

MATERIAL AVAILABLE FOR SELF CLINCHING STANDOFFS:

STEEL, STAINLESS STEEL, ALUMINUM

ADVANTAGES OF CLINCHING PARTS:

• PROVIDE STRONG THREADS IN METAL AS THIN AS 020″ / .51 MM.
• MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
• PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
• DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
• REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
• NO RETAPPING NECESSARY AFTER APPLICATION.
• LOW INSTALLED COSTS.

 – STANDOFFS 

USED WHERE IT IS NECESSARY TO STACK OR SPACE COMPONENTS AWAY FROM THE PANEL. THRU-THREADED OR BLIND TYPES ARE GENERALLY STANDARD.

-OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

BLIND JACK NUTS

BLIND JACK NUTS

TJM & TJU SERIES

THE BLIND JACK NUT IS AN ECONOMICAL BLIND FASTENER DESIGNED FOR ASSEMBLY LIND USE IN THIN, SOFT OR BRITTLE MATERIALS. WHEN TIGHTENED, THEIR BODY COLLAPSES TO FORM LEGS WHICH GRIP THE INSIDE OF THE MOUNTING SURFACE, LEAVING A PERMANENT REUSABLE THREADED INSERT. STANDARD BLIND JACK NUT ARE MANUFACTURED OF STEEL WITH A COMMERCIAL ZINC PLATING. ALL BLIND JACK NUTS CAN BE SUPPLIED WITH BRASS COATED WHICH ASSIST GALVANIC CORROSION CONCERNS.

MATERIAL AVAILABLE FOR BLIND JACK NUT: 
STEEL, STAINLESS STEEL

FEATURES:

• FASTENS IN BLIND HOLES
• FASTENS SECURELY DESPITE BURRS & UNEVEN SUBSTRATES
• NOT HOLE SIZE SENSITIVE
• SUITABLE FOR WIDE GRIP RANG

APPLICATIONS:

• SPOILERS AND OTHER AERODYNAMIC DEVICES
• LICENCE PLATE BRACKETS
• HIGH-LAMP STOP LIGHTS
• AIR CONDITIONING CONDENSERS
• GLOVE COMPARTMENTS
• SPEAKER HOUSINGS
• LATH MOUNTINGS
• TRUCK UTILITY COMPARTMENTS

1. THREAD INSRT ONTO THE MANDREL OF INSTALLATION TOOL, THEN INSERT ALL THE WAY INTO PREDRILLED HOLE UNTIL FLANGE IS FIRMLY AGAINST MOUNTING SURFACE.
   
2. FULLY COLLASPE INSERT, THEN REMOVE TOOL.
   
3. PASS MACHINE SCREW THROUGH PART TO BE FASTENED, THEN TIGHTEN UNTIL SUNG.
   

– OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

BLIND JACK NUT TOOL 

AN ECONOMICAL, EASY TO USE TOOL FOR LOW-VOLUME INSTALLATION IN ANY MATERIAL. THREAD PULL-ROD INTO BLIND JACK NUT, INSERT INTO HOLE, AND SQUEEZE HANDLES TO SET. INTERCHANGEABLE PULL-OUT RODS AVAILABLE TO SET ALL SIZES. PNEUMATIC BLIND JACK NUT TOOL ALSO AVAILABLE.

STRETCH FOLDING BLIND RIVET

STRETCH FOLDING BLIND RIVET

TS SERIES

 

MATERIAL AVAILABLE FOR STRETCH FOLDING BLIND RIVETS: 

RIVET BODY MATERIAL : ALUMINUM 5052.

MANDREL MATERIAL : ALUMINUM 5056.

POSITIVE MANDREL RETENTION :

RATTLE FREE FASTENER

CORROSION RESISTANT:

ALL ALUMINUM CONSTRUCTION

MULTI GRIP:

• ADJUSTS TO A WIDE VARIATION OF SUBJECT’S THICKNESS.
• FINISH AVAILABLE IN A MULTIPLE OF COLOR.

SUITABLE APPLICATIONS:

• SUPPORTS BRITTLE, THIN SOFT OR DUCTILE MATERIALS AND FUNCTIONS WHEN USED WITH OVERSIZED, MISALIGNED OR IRREGULARLY SHAPED HOLES.
• THE STRETCH FOLDING BLIND RIVET FORMS THREE LARGE FOLDING LEGS THAT CREATE EXCELLENT CLAMPING-UP AND A LARGE BLIND SIDE BEARING SURFACE.

HEXAGON RIVET NUT – FHSM & FHSI SERIES

HEXAGON RIVET NUT :

FHSM & FHSI SERIES

FULL-HEXAGON WITH SMALL FLANGE RIVET NUT

AND HEX FLANGE, ROUND INTERNAL HOLE, OPEN END

MATERIAL AVAILABLE:

STEEL, STAINLESS STEEL 302( INOX A2/18-8) AND 316 ( INOX A418-10), BRASS, ALUMINUM 5056

SURFACE FINSIH AVAILABLE:
STEEL:CR3 WHITE/YELLOW/BLACK ZINC PLATED, CR3 ZINC NICKEL PLATED, NICKEL PLATED
STAINLESS STEEL: CLEAN OR PASSIVATED.
BRASS:CLEAN
ALUMINUM:CLEAN

CHARACTERISTICS OF SMALL FLANGE BLIND RIVET NUT

• THE BLIND RIVET NUT HAS BEEN SPECIALLY DEVELOPED TO GIVE DESIGNERS A STRONG AND VIBRATION- PROOF STEEL THREAD IN THIN SHEET APPLICATIONS.
• THE BLIND RIVET NUT CAN BE USED TO ASSEMBLE TWO OR MORE SHEETS OF VARIOUS MATERIALS (STEEL, ALUMINUM, WOOD, PLASTIC, ETC.) AND CAN BE FIXED BY A SCREW.
• THE HEAD OF SMALL FLANGE BLIND RIVET NUT IS IN A COUNTERSUNK SHAPE THAT MAKES THE APPLICATION SURFACE FLAT AND SMOOTH AFTER INSTALLATION.
• THE BLIND RIVET NUT IS FAST AND CONVENIENT IN INSTALLATION.
• APPLICATION SURFACE FINISH WILL NOT BE DAMAGED AFTER INSTALLTION OF BLIND RIVET NUT.

THE BLIND RIVET NUT OFFERS THE FOLLOWING ADVANTAGES

• EASY AND FAST INSTALLATION.
• HIGH TORQUE AND STRONG THREADS ARE COMPARABLE TO NORMAL FASTENERS.

ASSEMBLY APPLICATIONS

• AUTOMATIVE
• ELECTRICAL ENGINEERING
• SHEET METAL
• GENERAL LIGHT FABRICATION

-OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

ALUMINUM/STEEL BLIND RIVETS

ALUMINUM/ STEEL BLIND RIVETS TS.AAS. SERIES

　

  

TS.AAS.	ITEM SIZE
ALUMINUM RIVET STEEL SHAFT	A(HEAD DIA.)	B(BODY DIA.)	(INCH)	C(LENGTH)	(INCH)
TS.AAS 3-2	4.5mm	2.4mm	3/32	5.80mm	.23
TS.AAS 3-3				7.40mm	.30
TS.AAS 3-4				8.40mm	.33
TS.AAS 4-1	6.4mm	3.2mm	1/8	4.80mm	.19
TS.AAS 4-2				6.40mm	.25
TS.AAS 4-3				8.00mm	.315
TS.AAS 4-4				9.60mm	.38
TS.AAS 4-5				11.50mm	.45
TS.AAS 4-6				12.70mm	.50
TS.AAS 4-8				16.10mm	.63
TS.AAS 5-1	8.0mm	4.0mm	5/3	5.80mm	.23
TS.AAS 5-2				7.00mm	.275
TS.AAS 5-3				8.50mm	.335
TS.AAS 5-4				10.00mm	.394
TS.AAS 5-5				11.40mm	.488
TS.AAS 5-6				13.00mm	.511
TS.AAS 5-8				16.50mm	.65
TS.AAS 5-10				19.50mm	.77
TS.AAS 6-1	9.0mm	4.8mm	3/16	6.40mm	.25
TS.AAS 6-2				7.40mm	.30
TS.AAS 6-3				9.60mm	.38
TS.AAS 6-4				11.00mm	.44
TS.AAS 6-5				12.70mm	.50
TS.AAS 6-6				14.50mm	.57
TS.AAS 6-8				17.50mm	.69
TS.AAS 6-10				20.40mm	.80
TS.AAS 6-12				24.00mm	.95

MATERIAL AVAILABLE FOR ALUMINUM/ STEEL BLIND RIVETS TS.AAS. SERIES:

RIVET:   ALUMINUM 5050
SHAFT: STEEL 1018 ~ 1022

FINISH SURFACE AVAILABLE:
RIVET:   SELF COULOUR/ COLOURED IN YELLOW/ BLACK/ WHITE/ RED…ETC
SHAFT:  CR3 WHITE ZINC PLATED/ CR3 YELLOW ZINC PLATED

ADVANTAGES OF ALUMINUM/STEEL BLIND RIVET:

• ALUMINUM/STEEL BLIND RIVETS PROVIDE STRONG HOLDING FOR APPLICATION.
• ALUMINUM/STEEL BLIND RIVETS ARE LOW IN COST COMPARE WITH BOLT AND NUT.
• ALUMINUM/STEEL BLIND RIVETS ARE IDEAL FOR WIDE RANGE APPLICATION.
• ALUMINUM/STEEL BLIND RIVETS ARE AVAILABLE IN DOME, COUNTERSUNK OR LARGE FLANGE STYLE.
• ALUMINUM/STEEL BLIND RIVETS ARE FAST AND EASY TO INSTALL.
• ALUMINUM/STEEL BLIND RIVETS ARE IDEAL FOR RUST RESISTANCE APPLICATION.
• ALUMINUM/STEEL BLIND RIVETS ARE IDEAL FOR LIGHT WEIGHT USAGE.★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
• 
  

• TOP QUALITY INSTRUMENT INC. USA
  

• http://www.topqualityinstrument.com/