KNURLED THREAD INSERT ST SERIES

ST SERIES KNURLED THREAD INSERT

KNURLED THREAD INSERT TOP QUALITY

ST series Threaded insert is designed to be installed in the small space. The body length after riveting is shorter than any standard type of blind rivet nut. The head of insert can press tightly against surface of application.

ST series can be installed on application which the thickness is thicker than 0.03” (0.76mm) and the application can be most any type of material.

The material for ST series can be Steel and Stainless Steel.

Further information about recommended hole size, grip range and application thickness. Please refer below table.

 

Unified (inch) and meteric thread sizes

THREAD SIZE

PART NO. HD

±0.005

L

±0.015

D

MAX

IL

MAX

LB

±0.015

ILB

MAX

IATD

MAX

HOLE

DEPTH MIN

UNC 4-40 CATI 440 .211 .370 .1875 .205 .660 .495 .395

.400

UNC 6-32

CATI 632 .240 .370 .2185 .205 .675 .505 .410 .400
UNC 8-32 CATI 832 .269 .370 .2495 .205 .675 .505 .410

.400

UNC 10-24

CATI 1024 .306 .370 .2805 .205 .685 .520 .385 .400
UNC 10-32 CATI 1032 .306 .370 .2805 .205 .685 .520 .385

.400

UNC 1/4-20

CATI 420 .400 .515 .3745 .275 1.005 .760 .615 .540
UNC 5/16-18 CATI 518 .528 .615 .4995 .325 1.065 .770 .630

.640

UNC 3/8-16

CATI 616 .588 .745 .5615 .390 1.450 1.095 .890 .770
UNC 1/2-13 CATI 1213 .800 .935 .7485 .485 NA NA NA

.960

THREAD SIZE

PART NO. HD

±0.005

L

±0.015

D

MAX

IL

MAX

LB

±0.015

ILB

MAX

IATD

MAX

HOLE

DEPTH MIN

ISO M3x0,5 CATM 350 5,36 9,40 4,76 5,21 16,77 12,57 10,03

10,16

ISO M4x0,7

CATM 470 6,83 9,40 6,34 5,21 17,15 12,83 10,41 10,16
ISO M5x0,8 CATM 580 7,77 9,40 7,12 5,21 17,40 13,21 9,78

10,16

ISO M6x1,0

CATM 610 10,16 13,08 9,51 6,99 25,53 19,30 15,62 13,72
ISO M8x1,25 CATM 8125 13,41 15,62 12,69 8,26 27,05 19,56 16,00

16,26

ISO M10x1,5

CATM 1015 14,94 18,92 14,26 9,91 36,83 27,81 22,61 19,56
ISO M12x1,75 CATM 12175 20,32 23,75 19,01 12,32 NA NA NA

24,38

 

Hole size / meterial thickness chart

THREAD SIZE

.030-.090 MAT. THICKNESS .091-.124 MAT. THICKNESS .125-.186 MAT. THICKNESS

.187-OVER MAT. THICKNESS

DRILL SIZE

DECIMAL DRILL SIZE DECIMAL DRILL SIZE DECIMAL DRILL SIZE DECIMAL
UNC 4-40 3/16 .1875 #10 .1935 #10 .1935 #9

.1960

UNC 6-32

7/32 .2188 #2 .2210 #1 .2280 #1 .2280
UNC 8-32 1/4 .2500 “F” .2570 17/64 .2656 17/64

.2656

UNC 10-24

9/32 .2812 “L” .2900 “L” .2900 19/64 .2969
UNC 10-32 9/32 .2812 “L” .2900 “L” .2900 19/64

.2969

UNC 1/4-20

0.375 .3750 0.375 .3750 “W” .3860 25/64 .3906
UNC 5/16-18 0.5 .5000 0.5 .5000 33/64 .5156 33/64

.5156

UNC 3/8-16

0.5625 .5625 0.5625 .5625 37/64 .5781 37/64 .5781
UNC 1/2-13 0.75 .7500 0.765625 .7656 25/32 .7810 51/64

.7970

THREAD SIZE

.030-.090 MAT. THICKNESS .091-.124 MAT. THICKNESS .125-.186 MAT. THICKNESS .187-OVER MAT. THICKNESS

DRILL SIZE

DECIMAL DRILL SIZE DECIMAL DRILL SIZE DECIMAL DRILL SIZE

DECIMAL

ISO M3x0,5 4,75 .1875 4,90 .1935 4,90 .1935 4,97

.1960

ISO M4x0,7

6,35 .2500 6,52 .2570 6,74 .2656 6,74 .2656
ISO M5x0,8 7,14 .2812 7,36 .2900 7,36 .2900 7,54

.2969

ISO M6x1,0

9,52 .3750 9,52 .3750 9,80 .3860 9,92 .3906
ISO M8x1,25 12,70 .5000 12,70 .5000 13,09 .5156 13,09

.5156

ISO M10x1,5

14,28 .5625 14,28 .5625 14,68 .5781 14,68 .5781
ISO M12x1,75 19,05 .7500 19,44 .7656 19,83 .7810 20,24

.7970

 

ST series Threaded insert is commonly used in any industry including automobile industry.

 

TOP QUALITY INSTRUMENT INC.

MAIL:topqualityinstrument@gmail.com

Advertisements

防滲水拉帽 SEAL RIVET NUT

防滲水拉帽

SEAL RIVET NUT

SEAL RIVET NUT -3-tq SEAL RIVET NUT -4-tq SEAL RIVET NUT -5-tq SEAL RIVET NUT SERIES-tq

防滲水拉帽之材質:

鋁5056、白鐵

 

防滲水拉帽之表面處理:

洗清、陽極

 

防滲水拉帽之特性:

以特殊的防漏材料永久附著於帽沿底部,以達到防止空氣、灰塵、水、水蒸氣、二甲苯、甘油(防凍劑)等滲入或洩漏之功效

工作溫度從-40℃到150℃

 

防滲水拉帽之應用:

戶外機械

戶外電子儀器

戶外照明設備

 

★其他尺寸,材質和表面處理可依客戶要求訂做。

 

MATERIAL AVALIABLE:

ALUMINUM 5056, STAINLESS STEEL

 

SURFACE FINISH AVALIABLE:

CLEAN, ANODIC TREATMENT

 

CHARACTERISTICS OF SEAL RIVET NUT:

NYPLAS IS APPLIED COATING UNDER THE HEAD OF THE BLIND RIVET NUT TO PROVIDE SEALING AGAINST AIR, DUST, WATER AND MOISTURE.

WORKING TEMPERATURE: -40℃ TO 150℃.

 

APPLICATIONS OF SEAL RIVET NUT:

OUTDOOR MACHINE

OUTDOOR ELECTRIC EQUIPMENT

OUTDOOR LIGHTING EQUIPMENT

 

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

DRIVE PIN RIVET – SMALL FLANGE & FLAT HEAD BLIND RIVET NUT

BLIND RIVET NUT – SMALL FLANGE & FLAT HEAD BLIND RIVET NUT

BLIND RIVET NUT-SEM_SAM_SAI_BEM_BAI SERIES-tq

SMALL FLANGE BLIND RIVET NUT OPEN END

SEM、SAM、SAI SERIES

BLIND RIVET NUT-SEM_SAM_SAI SERIES-tq

FLAT HEAD BERYNUT OPEN END

BEM、BAI、SERIES

BLIND RIVET NUT-BEM SERIES-tq  BLIND RIVET NUT-BAI SERIES-tq

MATERIAL AVAILABLE:

STEEL, STAINLESS STEEL 302( INOX A2/18-8) AND 316 ( INOX A4/18-10), BRASS, ALUMINUM 5056

SURFACE FINSIH AVAILABLE:

STEEL:CR3 WHITE/ YELLOW/ BLACK ZINC PLATED, CR3 ZINC NICKEL PLATED, NICKEL PLATED

STAINLESS STEEL:CLEAN OR PASSIVATED

BRASS:CLEAN

ALUMINUM:CLEAN

CHARACTERISTICS OF SMALL FLANGE BLIND RIVET NUT:

THE BLIND RIVET NUT HAS BEEN SPECIALLY DEVELOPED TO GIVE DESIGNERS A STRONG AND VIBRATION- PROOF STEEL THREAD IN THIN SHEET APPLICATIONS.

THE BLIND RIVET NUT CAN BE USED TO ASSEMBLE TWO OR MORE SHEETS OF VARIOUS MATERIALS (STEEL, ALUMINUM, WOOD, PLASTIC, ETC.) AND CAN BE FIXED BY A SCREW.

THE HEAD OF SMALL FLANGE BLIND RIVET NUT IS IN A COUNTERSUNK SHAPE THAT MAKES THE APPLICATION SURFACE FLAT AND SMOOTH AFTER INSTALLATION.

THE BLIND RIVET NUT IS FAST AND CONVENIENT IN INSTALLATION.

APPLICATION SURFACE FINISH WILL NOT BE DAMAGED AFTER INSTALLTION OF BLIND RIVET NUT.

THE BLIND RIVET NUT OFFERS THE FOLLOWING ADVANTAGES:

EASY AND FAST INSTALLATION.

HIGH TORQUE AND STRONG THREADS ARE COMPARABLE TO NORMAL FASTENERS.

ASSEMBLY APPLICATIONS:

AUTOMATIVE、ELECTRICAL ENGINEERING、SHEET METAL、GENERAL LIGHT FABRICATION

★ OTHER SIZES, MATERIAL ARE AVAILABLE UPON REQUEST

MULTIGRIP BLIND RIVET

BLIND THREADED RIVET

HIGH STRENGTH

MULTIGRIP BLIND RIVET

TM SERIES

MULTIGRIP-3(topquality) MULTIGRIP-1

MATERIAL AVAILABLE FOR MULTI-GROP BLIND RIVETS: 


RIVET BODY MATERIAL : ALUMINUM 5052.

MANDREL MATERIAL : STEEL / ZINC PLATED.

SUITABLE APPLICATION:

  • AUTOMOBILES, MOTORCYCLES, ELECTRICAL APPLIANCES, LIGHTING FIXTURES, ETC.
  • MAKES THE GAP OF JOINING OBJECTS EXPAND FIRST THEN RIVETS THEM CLOSELY.
  • IT WILL NOT BE LOOSENED BY SHANK.
  • THE INNER AND OUTER JOINS ARE GOOD LOOKING.
  • HELPS REDUCE STOCK RANGE.
  • PARTICULAR DOME HEADS ACCEPTABLE.
  • FINISH AVAILABLE IN A MULTIPLE OF COLORS.

MULTIGRIP-2(topquality)

OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

rivet(topquality)

TSC4 SELF CLINCHING NUTS

SELF CLINCHING PART

SELF CLINCHING NUTS

TSC4 SERIES

1(topquality) DOC122112

ADVANTAGES OF CLINCHING PARTS:

  •    PROVIDE STRONG THREADS IN METAL AS THIN AS 020″ / .51 MM.
  •    MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
  •    PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
  •    DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
  •    REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
  •    NO RETAPPING NECESSARY AFTER APPLICATION.
  •    LOW INSTALLED COSTS.

 – NUTS

NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.

4(topquality)

TSC1 SELF CLINCHING STANDOFF

SELF CLINCHING PARTS

SELF CLINCHING STANDOFF

TSC1 SERIES

1(topquality)

MATERIAL AVAILABLE FOR SELF CLINCHING STANDOFFS:

STEEL, STAINLESS STEEL, ALUMINUM

ADVANTAGES OF CLINCHING PARTS:

  • PROVIDE STRONG THREADS IN METAL AS THIN AS 020″ / .51 MM.
  • MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
  • PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
  • DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
  • REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
  • NO RETAPPING NECESSARY AFTER APPLICATION.
  • LOW INSTALLED COSTS.

 – STANDOFFS 

USED WHERE IT IS NECESSARY TO STACK OR SPACE COMPONENTS AWAY FROM THE PANEL. THRU-THREADED OR BLIND TYPES ARE GENERALLY STANDARD.

-OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

3(topquality) 4(topquality)

BLIND JACK NUTS

BLIND JACK NUTS

TJM & TJU SERIES

3(topquality)

THE BLIND JACK NUT IS AN ECONOMICAL BLIND FASTENER DESIGNED FOR ASSEMBLY LIND USE IN THIN, SOFT OR BRITTLE MATERIALS. WHEN TIGHTENED, THEIR BODY COLLAPSES TO FORM LEGS WHICH GRIP THE INSIDE OF THE MOUNTING SURFACE, LEAVING A PERMANENT REUSABLE THREADED INSERT. STANDARD BLIND JACK NUT ARE MANUFACTURED OF STEEL WITH A COMMERCIAL ZINC PLATING. ALL BLIND JACK NUTS CAN BE SUPPLIED WITH BRASS COATED WHICH ASSIST GALVANIC CORROSION CONCERNS.

MATERIAL AVAILABLE FOR BLIND JACK NUT: 
STEEL, STAINLESS STEEL

FEATURES:

  • FASTENS IN BLIND HOLES
  • FASTENS SECURELY DESPITE BURRS & UNEVEN SUBSTRATES
  • NOT HOLE SIZE SENSITIVE
  • SUITABLE FOR WIDE GRIP RANG

APPLICATIONS:

  • SPOILERS AND OTHER AERODYNAMIC DEVICES
  • LICENCE PLATE BRACKETS
  • HIGH-LAMP STOP LIGHTS
  • AIR CONDITIONING CONDENSERS
  • GLOVE COMPARTMENTS
  • SPEAKER HOUSINGS
  • LATH MOUNTINGS
  • TRUCK UTILITY COMPARTMENTS
  1. THREAD INSRT ONTO THE MANDREL OF INSTALLATION TOOL, THEN INSERT ALL THE WAY INTO PREDRILLED HOLE UNTIL FLANGE IS FIRMLY AGAINST MOUNTING SURFACE.
    2-1(topquality)
  2. FULLY COLLASPE INSERT, THEN REMOVE TOOL.
    2-2(topquality)
  3. PASS MACHINE SCREW THROUGH PART TO BE FASTENED, THEN TIGHTEN UNTIL SUNG.
    2-3(topquality)

– OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

BLIND JACK NUT TOOL 

AN ECONOMICAL, EASY TO USE TOOL FOR LOW-VOLUME INSTALLATION IN ANY MATERIAL. THREAD PULL-ROD INTO BLIND JACK NUT, INSERT INTO HOLE, AND SQUEEZE HANDLES TO SET. INTERCHANGEABLE PULL-OUT RODS AVAILABLE TO SET ALL SIZES. PNEUMATIC BLIND JACK NUT TOOL ALSO AVAILABLE.

JACK-NUT-SMALL(topquality)

1(topquality)