MULTIGRIP BLIND RIVET

BLIND THREADED RIVET

HIGH STRENGTH

MULTIGRIP BLIND RIVET

TM SERIES

MULTIGRIP-3(topquality) MULTIGRIP-1

MATERIAL AVAILABLE FOR MULTI-GROP BLIND RIVETS: 


RIVET BODY MATERIAL : ALUMINUM 5052.

MANDREL MATERIAL : STEEL / ZINC PLATED.

SUITABLE APPLICATION:

  • AUTOMOBILES, MOTORCYCLES, ELECTRICAL APPLIANCES, LIGHTING FIXTURES, ETC.
  • MAKES THE GAP OF JOINING OBJECTS EXPAND FIRST THEN RIVETS THEM CLOSELY.
  • IT WILL NOT BE LOOSENED BY SHANK.
  • THE INNER AND OUTER JOINS ARE GOOD LOOKING.
  • HELPS REDUCE STOCK RANGE.
  • PARTICULAR DOME HEADS ACCEPTABLE.
  • FINISH AVAILABLE IN A MULTIPLE OF COLORS.

MULTIGRIP-2(topquality)

OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

rivet(topquality)

JACK NUTS FOR LATEST TYPE LICENSE PLATE

STAINLESS STEEL BLIND JACK NUTS

FOR LATEST TYPE LICENSE PLATE

LEBEL

CAR-ENGLISH

 CAR2-ENGLISH

The latest type license plates’ width and height are different from the original license plate. In addition, when you replace the license plate, you find that the holes place of the latest type license plate and the bodywork are not matched.

HOW TO SOLVE?

YOU JUST NEED OUR PRODUCT

☆ STAINLESS STEEL BLIND JACK NUT ☆

3(topquality)

THE BLIND JACK NUT IS AN ECONOMICAL BLIND FASTENER. WHEN TIGHTENED, THEIR BODY COLLAPSES TO FORM LEGS WHICH GRIP THE INSIDE OF THE MOUNTING SURFACE, LEAVING A PERMANENT REUSABLE THREADED INSERT.

ADVANTAGE FOR STAINLESS STEEL BLIND JACK NUT:

  • AVOID CORROSION
  • PREVENT RUST
  • SUITABLE FOR OUTDOOR

FEATURES FOR BLIND JACK NUT:

  • FASTENS IN BLIND HOLES
  • FASTENS SECURELY DESPITE BURRS & UNEVEN SUBSTRATES
  • NOT HOLE SIZE SENSITIVE
  • SUITABLE FOR WIDE GRIP RANG

INSTALLATION STEPS FOR BLIND JACK NUT:

未命名-1

TOP QUALITY INSTRUMENTS INC.

http://www.topqualityinstrument.com

sales1@topscrew.com.tw

T: 886-4-7237159

F: 886-4-7246640

TSC5 SELF CLINCHING LOCK NUT

SELF CLINCHING PARTS

TSC5 SELF CLINCHING LOCK NUT

1(topquality)

MATERIAL AVAILABLE FOR SELF CLINCHING LOCK NUT:

STEEL, STAINLESS STEEL, ALUMINUM AND BRASS

 

ADVANTAGES OF CLINCHING PARTS:

1. PROVIDE STRONG THREADS IN METAL AS THIN AS 020″ / .51 MM.

2. MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.

3. PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.

4. DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.

5. REVERSE SIDE OF METAL SHEET REMAINS FLUSH.

6. NO RETAPPING NECESSARY AFTER APPLICATION.

7. LOW INSTALLED COSTS.

 – NUTS

NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.

 

-OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

3(topquality)

4(topquality)