E SELF-DRIVING NUT

E SELF-DRIVING NUT, SEX BOLTS,SLEEVE NUT,FASTENERS, ARCHITECTURAL, HARDWARE,翼型螺帽,防盜螺母,防盜螺絲
E SELF-DRIVING NUT
MATERIAL AVALIABLE: 

STEEL, STAINLESS STEEL AND BRASS



ADVANTAGES:

1.INSTALL SLEEVE NUT TO ACCESS FRONT SIDE OF THE WORK PIECE & SCREW IN FROM BACK SIDE.

2.INSTALL WITHOUT ANY COMPLICATED TOOL AT ANY LOCATION ON THE ASSEMBLY.

3.INSTALL WITHOUT PRODUCING ANY HARMFUL MARK.

4.INSTALL INTO VARIES MATERIAL.

5.THE FANGS ON THE BODY CUT INTO THE APPLICATION DURING ASSEMBLY.

6.EASY, FAST & SAFE INSTALLATION.



INSTRUCTIONS OF E-SELF DRIVING NUT:

AS THE SLEEVE NUT IS STALLED, THE FANGS ON THE BODY ACTUALLY CUT INTO THE APPLICATION & PROVIDES GRIP STRENGTH. WHEN SCREW ON THE OPPOSITE SIDE HAVE DRIVEN, THE FANGS WILL GRIP APPLICATION TIGHTLY.

FEATURE OF E-SELF DRIVING NUT

(COMPARE WITH SEX BOLTS) 




I. ROUND BODY WITH FANGSON IT 

1.GRIP THE APPLICATION TIGHTLY

2.CANNOT BE DISASSEMBLED EASILY

3.PREVENT ANY ONE WHO INTENT TO PULL OUT



II. SCREW HEADCAN BE YOUR CHOICE 

1.THE SCREW HEAD CAN BE TAMPERPROOF

2.HARDLY TO DISASSEMBLED

3.COMBINE WITH GOOD SURFACE OUTLOOK

 OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST 

E SELF-DRIVING NUT, SEX BOLTS,SLEEVE NUT,FASTENERS, ARCHITECTURAL, HARDWARE,翼型螺帽,防盜螺母,防盜螺絲 E SELF-DRIVING NUT, SEX BOLTS,SLEEVE NUT,FASTENERS, ARCHITECTURAL, HARDWARE,翼型螺帽,防盜螺母,防盜螺絲E SELF-DRIVING NUT, SEX BOLTS,SLEEVE NUT,FASTENERS, ARCHITECTURAL, HARDWARE,翼型螺帽,防盜螺母,防盜螺絲
 
 
Advertisements

HALF-HEXAGON RIVET NUT HBM & HBI SERIES

HALF-HEXAGON RIVET NUT
HBM & HBI SERIES
HALF-HEXAGON WITH BIG FLANGE RIVET NUT FLAT HEAD,ROUND INTERNAL HOLE,OPEN END
MATERIAL AVAILABLE: 
STEEL, STAINLESS STEEL 302( INOX A2/18-8) AND 316 ( INOX A4/18-10), BRASS, ALUMINUM 5056


SURFACE FINSIH AVAILABLE: 
STEEL: CR3 WHITE/ YELLOW/ BLACK ZINC PLATED, CR3 ZINC NICKEL PLATED, NICKEL PLATED.
STAINLESS STEEL: CLEAN OR PASSIVATED.
BRASS: CLEAN
ALUMINUM: CLEAN


CHARACTERISTICS OF SMALL FLANGE BLIND RIVET NUT: 
1.THE BLIND RIVET NUT HAS BEEN SPECIALLY DEVELOPED TO GIVE DESIGNERS A STRONG AND VIBRATION- PROOF STEEL THREAD IN THIN SHEET APPLICATIONS.
2.THE BLIND RIVET NUT CAN BE USED TO ASSEMBLE TWO OR MORE SHEETS OF VARIOUS MATERIALS (STEEL, ALUMINUM, WOOD, PLASTIC, ETC.) AND CAN BE FIXED BY A SCREW.
3.THE HEAD OF SMALL FLANGE BLIND RIVET NUT IS IN A COUNTERSUNK SHAPE THAT MAKES THE APPLICATION SURFACE FLAT AND SMOOTH AFTER INSTALLATION.
4.THE BLIND RIVET NUT IS FAST AND CONVENIENT IN INSTALLATION.
5.APPLICATION SURFACE FINISH WILL NOT BE DAMAGED AFTER INSTALLTION OF BLIND RIVET NUT.


THE BLIND RIVET NUT OFFERS THE FOLLOWING ADVANTAGES: 
1.EASY AND FAST INSTALLATION.
2.HIGH TORQUE AND STRONG THREADS ARE COMPARABLE TO NORMAL FASTENERS.


ASSEMBLY APPLICATIONS: 
● AUTOMATIVE
● ELECTRICAL ENGINEERING
● SHEET METALGENERAL
● LIGHT FABRICATION


★CLICK ME TO SEE HOW TO INSTALL BLIND RIVET NUT BY HAND TOOL
★CLICK ME TO SEE HOW TO INSTALL BLIND RIVET NUT BY AIR PULL SETTER
★CLICK ME TO SEE HOW TO INSTALL BLIND RIVET NUT BY AIR RIVETING NUT TOOL 



 OTHER SIZES, MATERIAL ARE AVAILABLE UPON REQUEST

AHBM & AHBI SERIES
HALF-HEXAGON WITH SMALL FLANGE RIVET NUT
FLAT HEAD,HEX INTERNAL HOLE,OPEN END


 

SMALL FLANGE, SPLINED RIVET NUT TSSS SERIES

SPLINED RIVET NUT
SMALL FLANGE, SPLINED RIVET NUT
TSSS SERIES
MATERIAL AVAILABLE: 
STEEL, STAINLESS STEEL 302( INOX A2/18-8) AND 316 ( INOX A4/18-10), BRASS, ALUMINUM 5056


SURFACE FINSIH AVAILABLE: 
STEEL: CR3 WHITE/ YELLOW/ BLACK ZINC PLATED, CR3 ZINC NICKEL PLATED, NICKEL PLATED.
STAINLESS STEEL: CLEAN OR PASSIVATED.
BRASS: CLEAN
ALUMINUM: CLEAN


CHARACTERISTICS OF SMALL FLANGE BLIND RIVET NUT: 
1.THE BLIND RIVET NUT HAS BEEN SPECIALLY DEVELOPED TO GIVE DESIGNERS A STRONG AND VIBRATION- PROOF STEEL THREAD IN THIN SHEET APPLICATIONS.
2.THE BLIND RIVET NUT CAN BE USED TO ASSEMBLE TWO OR MORE SHEETS OF VARIOUS MATERIALS (STEEL, ALUMINUM, WOOD, PLASTIC, ETC.) AND CAN BE FIXED BY A SCREW.
3.THE HEAD OF SMALL FLANGE BLIND RIVET NUT IS IN A COUNTERSUNK SHAPE THAT MAKES THE APPLICATION SURFACE FLAT AND SMOOTH AFTER INSTALLATION.
4.THE BLIND RIVET NUT IS FAST AND CONVENIENT IN INSTALLATION.
5.APPLICATION SURFACE FINISH WILL NOT BE DAMAGED AFTER INSTALLTION OF BLIND RIVET NUT.


THE BLIND RIVET NUT OFFERS THE FOLLOWING ADVANTAGES: 
1.EASY AND FAST INSTALLATION.
2.HIGH TORQUE AND STRONG THREADS ARE COMPARABLE TO NORMAL FASTENERS.


ASSEMBLY APPLICATIONS: 
● AUTOMATIVE
● ELECTRICAL ENGINEERING
● SHEET METALGENERAL
● LIGHT FABRICATION


★CLICK ME TO SEE HOW TO INSTALL BLIND RIVET NUT BY HAND TOOL
★CLICK ME TO SEE HOW TO INSTALL BLIND RIVET NUT BY AIR PULL SETTER
★CLICK ME TO SEE HOW TO INSTALL BLIND RIVET NUT BY AIR RIVETING NUT TOOL 



 OTHER SIZES, MATERIAL ARE AVAILABLE UPON REQUEST

LARGE FLANGE, SPLINED RIVET NUT
TSBS SERIES

 

the best glass breaker

#Glass #breaker-the best equipment for #escape
designed as “push down”function which is easy
when people during #emergency situation.

THE BEST EQUIPMENT FOR ESCAPE
(Taiwan Patent No I442953)



A IDEAL SAFETY DEVICE USED IN VEHICLES, HOME OR WORK PLACE TO BREAK THROUGH WINDOW GLASS IN AN EMERGENCY.



THIS ITEM WE DESIGN IT GOING TO BE USED IN THE BUS, CAR, BUILDING(ESPECIALLY FOR OFFICE BUILDING)..ETC.

USUALLY THE “GLASS BREAKER” IS FORM AS A PIN AND HUGE STRENGTH MIGHT BE NEEDED WHEN USING, HOWEVER, OUR INVENTION IS TO BE DESIGNED AS “PUSH DOWN” FUNCTION WHICH IS EASY WHEN PEOPLE DURING EMERGENCY SITUATION.



FEATURES:

1.PRACTICAL FOR CAR USE IN EMERGENCY

2.SMASHING WINDOW EASY & QUICKLY

3.STRONG DESTRUCTION

4.HIGH QUALITY

 

ST SERIES-THREADED INSERT

KNURLED THREAD INSERT

ST series threaded insert is different from our standard type of blind rivet nut. The overall length is shorter than standard type which it allows to be used in small & narrow space.

Although it is short type but it can be installed into most any material with thickness over 0.03” (0.76mm).

The head of insert can press tightly against the surface of application after riveting.

It is commonly to be used in any industry including automobile industry

Material: Steel/ Stainless Steel/ Brass/ Aluminum

樣版2

UNFIED (INCH) AND METERIC THREAD SIZE

THREAD
SIZE

PART NO.

HD

±0.005

L

±0.015

D

MAX

IL

MAX

LB

±0.015

ILB

MAX

IATD

MAX

HOLE

DEPTHE
MIN

UNC 4-40

CAT I440

.211

.370

.1875

.205

.660

.495

.395

.400

UNC 6-32

CAT I630

.240

.370

.2185

.205

.675

.505

.410

.400

UNC 8-32

CATI 832

.269

.370

.2495

.205

.675

.505

.410

.400

UNC 10-24

CATI 1024

.306

.370

.2805

.205

.685

.520

.385

.400

UNC 10-32

CATI 1032

.306

.370

.2805

.205

.685

.520

.385

.400

UNC 1/4-20

CATI 420

.400

.515

.3745

.275

1.005

.760

.615

.540

UNC5/16-18

CATI 520

.528

.615

.4995

.325

1.065

.770

.630

.640

UNC 3/8-16

CATI 616

.588

.745

.5615

.390

1.450

1.095

.890

.770

UNC 1/2-13

CATI 1213

.800

.935

.7485

.485

NA

NA

NA

.960

THREAD
SIZE

PART NO.

HD

±0.005

L

±0.015

D

MAX

IL

MAX

LB

±0.015

ILB

MAX

IATD

MAX

HOLE

DEPTHE
MIN

ISO M3X05

CATM 350

5.36

9.40

4.76

5.21

16.77

12.57

10.03

10.16

ISO M4X0.7

CATM 470

6.83

9.40

6.34

5.21

17.15

12.83

10.41

10.16

ISO M5X0.8

CATM 580

7.77

9.40

7.12

5.21

17.40

13.21

9.78

10.16

ISO M6X1.0

CATM 610

10.16

13.08

9.51

6.99

25.53

19.30

15.62

13.72

ISO M8X1.25

CATM 8125

13.41

15.62

12.69

8.26

27.05

19.56

16.00

16.26

ISO M10X1.5

CATM 1015

14.94

18.92

14.26

9.91

36.83

27.81

22.61

19.56

ISO M12X1.75

CATM 12175

20.32

23.75

19.01

12.32

NA

NA

NA

24.38

Hole size/material thickness chart

THREAD
SIZE

.303-.090MAT.

THICKNESS

.091-.124MAT.

THICKNESS

.125-.186MAT.

THICKNESS

.187-OVER MAT.

THICKNESS

DRILL
SIZE

DECIMAL

DRILL
SIZE

DECIMAL

DRILL
SIZE

DECIMAL

DRILL
SIZE

DECIMAL

UNC4-40

3/16

.1875

#10

.1935

#10

.1935

#9

.1960

UNC6-32

7/32

.2188

#2

.2210

#1

.2280

#1

.2280

UNC8-32

1/4

.2500

“F”

.2570

17/64

.2656

17/64

.2656

UNC10-24

9/32

.2812

“L”

.2900

“L”

.2900

19/64

.2969

UNC10-32

9/32

.2812

“L”

.2900

“L”

.2900

19/64

.2969

UNC1/4-20

0.375

.3750

0.375

.3750

“W”

.3860

25/64

.3906

UNC5/16-18

0.5

.5000

0.5

.5000

33/64

.5156

33/64

.5156

UNC3/8-16

0.5625

.5625

0.5625

.5625

37/64

.5781

37/64

.5781

UNC1/2-13

0.75

.7500

0.765625

.7656

25/32

.7810

51/64

.7970

THREAD
SIZE

.303-.090MAT.

THICKNESS

.091-.124MAT.

THICKNESS

.125-.186MAT.

THICKNESS

.187-OVER MAT.

THICKNESS

DRILL
SIZE

DECIMAL

DRILL
SIZE

DECIMAL

DRILL
SIZE

DECIMAL

DRILL
SIZE

DECIMAL

ISO M3X0.5

3/16

.1875

#10

.1935

#10

.1935

#9

.1960

ISO M4X0.7

7/32

.2188

#2

.2210

#1

.2280

#1

.2280

ISO M5X0.8

1/4

.2500

“F”

.2570

17/64

.2656

17/64

.2656

ISO M6X1.0

9/32

.2812

“L”

.2900

“L”

.2900

19/64

.2969

ISO M8X1.25

9/32

.2812

“L”

.2900

“L”

.2900

19/64

.2969

ISO M10X1.5

0.375

.3750

0.375

.3750

“W”

.3860

25/64

.3906

ISO M12X1.25

0.5

.5000

0.5

.5000

33/64

.5156

33/64

.5156

TOP QUALITY INSTRUMENT INC.

MAIL:topqualityinstrument@gmail.com

PLUSNUT – PRE-BULBED(QUAD FOLDING RIVETNUTS / SPLIT NUT)

FEATURES:

HIGH PULL OUT STRENGTH IN THIN OR SOFT MATERAIL.

WIDE GRIP RANGE FOR VARIABLE THICKNESS MATERAIL AND EVEN IN UNEVEN SURFACE.

EASY INSTALLATION WITHOUT DISTORT, DEFORM OR DAMAGING PARENT MATERIAL (EX. SOFT PLASTICS, THIN SHEET METAL).

THE FOUR LEGS ARE PULLED TOGETHER EXPANDING OUTWARDS BEHIND THE SURFACE MATERIAL TO PROVIDE A LARGE LOAD BEARING AREA.

SPECIFICALLY DESIGNED FOR USE IN SOFT AND BRITTLE MATERIALS, SHEET METAL, FIBERGLASS, PLASTICS AND COMPOSITES.

APPLICATIONS:

AEROSPACE (E.G., INSTRUMENT PANEL, SEATBELT)

AUTOMOBILES AND MOTORCYCLES PARTS AND MOLDINGS (E.G., CAR TOP CARRIERS)

TRUCKS AND TRAILERS SANDWICH SECTIONS AND PANELLING.

DOMESTIC APPLIANCES – HANDLES, ADJUSTABLE FEET AND FIXING POINTS.

PLASTIC FABRICATIONS:ELECTRONICS, ENCLOSURES…ETC.

plusnut-pre-bulbed-tq

 

 

 

 

PLUSNUT PRE-BULBED – DIMENSIONS & SPECIFICATIONS

(MILLIMETERS)

PART
NO.

THREAD

SIZE

GRIP

RANGE

HOLE

SIZE

HEAD

DIA.

(H)

HEAD

THICKNESS

(t)

BODY

DIA.

(D)

LENGTH

 

(L)

TOPSN6

M6PH1.0

0.50-7.10

9.80-9.93

15.90

1.50

9.76

26.20

TOPSN6-L

M6PH1.0

7.10-12.70

9.80-9.93

15.90

1.50

9.76

32.00

TOPSN8

M8PH1.25

0.50-7.10

12.29-12.42

19.00

1.57

12.25

30.00

TOPSN8-L

M8PH1.25

7.10-12.70

12.29-12.42

19.00

1.57

12.25

35.80

TOPSN10

M10PH1.50

0.50-7.10

14.27-14.45

22.20

2.24

14.23

32.30

TOPSN10-L

M10PH1.50

7.10-12.70

14.27-14.45

22.20

2.24

14.23

37.80

 PLUSNUT PRE-BULBED – DIMENSIONS & SPECIFICATIONS

(INCH)

PART
NO.

THREAD

SIZE

GRIP

RANGE

HOLE

SIZE

HEAD

DIA.

(H)

HEAD

THICKNESS

(t)

BODY

DIA.

(D)

LENGTH

 

(L)

TOPSN1032

10-32

0.020-0.175

0.312-0.317

0.500

0.038

0.310

0.800

TOPSN1032-L

10-32

0.175-0.320

0.312-0.317

0.500

0.038

0.310

0.940

TOPSN420

1/4-20

0.020-0.280

0.386-0.391

0.625

0.058

0.384

1.030

TOPSN420-L

1/4-20

0.280-0.500

0.386-0.391

0.625

0.058

0.384

1.260

TOPSN518

5/16-18

0.020-0.280

0.484-0.489

0.750

0.062

0.482

1.180

TOPSN518-L

5/16-18

0.280-0.500

0.484-0.489

0.750

0.062

0.482

1.410

TOPSN616

3/8-16

0.020-0.280

0.562-0.569

0.875

0.088

0.560

1.270

TOPSN616-L

3/8-16

0.280-0.500

0.562-0.569

0.875

0.088

0.560

1.490

tq

 

 

TOP QUALITY INSTRUMENT INC.

MAIL:topqualityinstrument@gmail.com