梅花帶PIN BUTTON HEAD SOCKET TROX WITH PIN SCREWS

E SELF-DRIVING NUT, SEX BOLTS,SLEEVE NUT,FASTENERS, ARCHITECTURAL, HARDWARE,翼型螺帽,防盜螺母,防盜螺絲

MATERIAL AVALIABLE: 

STEEL, STAINLESS STEEL, ALUMINUM, BRASS



ADOPT SPECIAL HEAD TYPE AND PUNCH ON THE DESIGN IN SCREW, HAVE SAFE, GUARD TAKE APART AND THEFT, OFFER FUNCTION PROTECTED TO DESTROY TO DEFENDING. GENERAL WRENCH SET IS ALL UNABLE TO DESMANTLE SUCH AS CROSS, STRAIGHT-LINE HEX KEY, TORX KEY ETC.



 OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
FEMALE NUT
Advertisements

翼型螺帽 E SELF-DRIVING NUT

E SELF-DRIVING NUT, SEX BOLTS,SLEEVE NUT,FASTENERS, ARCHITECTURAL, HARDWARE,翼型螺帽,防盜螺母,防盜螺絲
E SELF-DRIVING NUT
MATERIAL AVALIABLE: 

STEEL, STAINLESS STEEL AND BRASS



ADVANTAGES:

1.INSTALL SLEEVE NUT TO ACCESS FRONT SIDE OF THE WORK PIECE & SCREW IN FROM BACK SIDE.

2.INSTALL WITHOUT ANY COMPLICATED TOOL AT ANY LOCATION ON THE ASSEMBLY.

3.INSTALL WITHOUT PRODUCING ANY HARMFUL MARK.

4.INSTALL INTO VARIES MATERIAL.

5.THE FANGS ON THE BODY CUT INTO THE APPLICATION DURING ASSEMBLY.

6.EASY, FAST & SAFE INSTALLATION.



INSTRUCTIONS OF E-SELF DRIVING NUT:

AS THE SLEEVE NUT IS STALLED, THE FANGS ON THE BODY ACTUALLY CUT INTO THE APPLICATION & PROVIDES GRIP STRENGTH. WHEN SCREW ON THE OPPOSITE SIDE HAVE DRIVEN, THE FANGS WILL GRIP APPLICATION TIGHTLY.

FEATURE OF E-SELF DRIVING NUT

(COMPARE WITH SEX BOLTS) 




I. ROUND BODY WITH FANGSON IT 

1.GRIP THE APPLICATION TIGHTLY

2.CANNOT BE DISASSEMBLED EASILY

3.PREVENT ANY ONE WHO INTENT TO PULL OUT



II. SCREW HEADCAN BE YOUR CHOICE 

1.THE SCREW HEAD CAN BE TAMPERPROOF

2.HARDLY TO DISASSEMBLED

3.COMBINE WITH GOOD SURFACE OUTLOOK

 OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST 

E SELF-DRIVING NUT, SEX BOLTS,SLEEVE NUT,FASTENERS, ARCHITECTURAL, HARDWARE,翼型螺帽,防盜螺母,防盜螺絲 E SELF-DRIVING NUT, SEX BOLTS,SLEEVE NUT,FASTENERS, ARCHITECTURAL, HARDWARE,翼型螺帽,防盜螺母,防盜螺絲E SELF-DRIVING NUT, SEX BOLTS,SLEEVE NUT,FASTENERS, ARCHITECTURAL, HARDWARE,翼型螺帽,防盜螺母,防盜螺絲
 
 

3孔自攻螺紋襯套 SELF TAPPING THREADED INSERT W. THREE CUTTING HOLE

三孔自攻螺紋襯套,self tapping threaded insert W.3 cutting hole

SELF TAPPING THREADED INSERT

W. THREE CUTTING HOLE
MATERIAL AVAILABLE: 

STEEL, STAINLESS STEEL, ALUMINUM, ALUMINUM ALLOY, BRASS



FOR USE IN THICK WALL OR CLOSE TO AN EDGE



ADVANTAGE:

1.HIGH PULL-OUT STRENGTH

2.HIGH TORQUE RESISTANCE

3.STRONG WEAR RESSTANCE THREAD

4.FAST, EASY INSTALLATION

5.EXTREME VIBRATION RESISTANCE



 OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

THICK WALL SECTION

SELF TAPPING THREAD INSERTS W. THREE CUTTING HOLE – THICK WALL SECTION
STEEL BLIND RIVET NUT, STAINLESS STEEL BLIND RIVET NUT, STAINLESS STEEL 316 BLIND RIVET,Fasteners, rivet nut, inserts, rivet, nuts, screws, bolts, studs, blind rivet nuts , self-clinching, bolt rivet nuts, e self-driving nut, self-tapping threaded inserts, sex bolts, PEM nut, binding post, Chicago screw, barrel nut, post, special blind rivet, security fastener, blind jack nut, welding stud, hardware parts, construction hardware,BLIND NUT, RIVET NUT, TOP SCREW METAL CORP, TOPS SCREW METAL CORP,INSERT NUT STEEL BLIND RIVET NUT, STAINLESS STEEL BLIND RIVET NUT, STAINLESS STEEL 316 BLIND RIVET,Fasteners, rivet nut, inserts, rivet, nuts, screws, bolts, studs, blind rivet nuts , self-clinching, bolt rivet nuts, e self-driving nut, self-tapping threaded inserts, sex bolts, PEM nut, binding post, Chicago screw, barrel nut, post, special blind rivet, security fastener, blind jack nut, welding stud, hardware parts, construction hardware,BLIND NUT, RIVET NUT, TOP SCREW METAL CORP, TOPS SCREW METAL CORP,INSERT NUT

3孔割溝螺紋襯套+開口銷 SELF TAPPING THREADED INSERT W. SLOTTED PIN

襯套,螺紋襯套,自攻螺紋襯套,3孔襯套,3孔螺紋襯套,鐵襯套,白鐵襯套,銅襯套,割溝襯套,襯套,螺紋襯套,自攻螺紋襯套,3孔襯套,3孔螺紋襯套,鐵襯套,白鐵襯套,銅襯套,割溝襯套,螺?

SELF TAPPING THREADED INSERT

W. THREE CUTTING HOLE
MATERIAL AVAILABLE: 

STEEL, STAINLESS STEEL, ALUMINUM, ALUMINUM ALLOY, BRASS



FOR USE IN THICK WALL OR CLOSE TO AN EDGE



ADVANTAGE:

1.HIGH PULL-OUT STRENGTH

2.HIGH TORQUE RESISTANCE

3.STRONG WEAR RESSTANCE THREAD

4.FAST, EASY INSTALLATION

5.EXTREME VIBRATION RESISTANCE



 OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

THICK WALL SECTION

SELF TAPPING THREAD INSERTS W. THREE CUTTING HOLE – THICK WALL SECTION
STEEL BLIND RIVET NUT, STAINLESS STEEL BLIND RIVET NUT, STAINLESS STEEL 316 BLIND RIVET,Fasteners, rivet nut, inserts, rivet, nuts, screws, bolts, studs, blind rivet nuts , self-clinching, bolt rivet nuts, e self-driving nut, self-tapping threaded inserts, sex bolts, PEM nut, binding post, Chicago screw, barrel nut, post, special blind rivet, security fastener, blind jack nut, welding stud, hardware parts, construction hardware,BLIND NUT, RIVET NUT, TOP SCREW METAL CORP, TOPS SCREW METAL CORP,INSERT NUT STEEL BLIND RIVET NUT, STAINLESS STEEL BLIND RIVET NUT, STAINLESS STEEL 316 BLIND RIVET,Fasteners, rivet nut, inserts, rivet, nuts, screws, bolts, studs, blind rivet nuts , self-clinching, bolt rivet nuts, e self-driving nut, self-tapping threaded inserts, sex bolts, PEM nut, binding post, Chicago screw, barrel nut, post, special blind rivet, security fastener, blind jack nut, welding stud, hardware parts, construction hardware,BLIND NUT, RIVET NUT, TOP SCREW METAL CORP, TOPS SCREW METAL CORP,INSERT NUT

自攻螺紋襯套 SELF TAPPING THREAD INSERTS – SLOTTED SERIES

襯套,螺紋襯套,自攻螺紋襯套,3孔襯套,3孔螺紋襯套,鐵襯套,白鐵襯套,銅襯套,割溝襯套,襯套,螺紋襯套,自攻螺紋襯套,3孔襯套,3孔螺紋襯套,鐵襯套,白鐵襯套,銅襯套,割溝襯套,螺?

SELF TAPPING THREAD INSERTS

SLOTTED SERIES
MATERIAL AVAILABLE: 

STEEL, STAINLESS STEEL 303 (A1), STAINLESS STEEL 316 (A4 / 18-10), BRASS C3604



SURFACE FINSIH AVAILABLE: 

CR3 WHITE/YELLOW ZINC PLATED



CHARACTERISTICS: 

1.EASY TO INSTALLED.

2.DESIGNED TO REPLACE SPRING COIL.

3.PROVIDE STRONG THREADS FOR WEAK MATERIAL LIKE ALUMINUM OR PLASTIC.

4.ABLE TO INSTALL FOR VIBRATING ENVIRONMENT.



APPICATIONS: 

1.CAN BE APPLIED TO DIFFERENT MATERIAL SUCH AS PLASTIC, ALUMINUM, CAST IRON.

2.DESIGNED TO APPLY IN WEAK MATERIAL WHERE THREADS ARE FRENQUENTLY USED.



 OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

SELF TAPPING THREAD INSERTS – SLOTTED SERIES
STEEL BLIND RIVET NUT, STAINLESS STEEL BLIND RIVET NUT, STAINLESS STEEL 316 BLIND RIVET,Fasteners, rivet nut, inserts, rivet, nuts, screws, bolts, studs, blind rivet nuts , self-clinching, bolt rivet nuts, e self-driving nut, self-tapping threaded inserts, sex bolts, PEM nut, binding post, Chicago screw, barrel nut, post, special blind rivet, security fastener, blind jack nut, welding stud, hardware parts, construction hardware,BLIND NUT, RIVET NUT, TOP SCREW METAL CORP, TOPS SCREW METAL CORP,INSERT NUT STEEL BLIND RIVET NUT, STAINLESS STEEL BLIND RIVET NUT, STAINLESS STEEL 316 BLIND RIVET,Fasteners, rivet nut, inserts, rivet, nuts, screws, bolts, studs, blind rivet nuts , self-clinching, bolt rivet nuts, e self-driving nut, self-tapping threaded inserts, sex bolts, PEM nut, binding post, Chicago screw, barrel nut, post, special blind rivet, security fastener, blind jack nut, welding stud, hardware parts, construction hardware,BLIND NUT, RIVET NUT, TOP SCREW METAL CORP, TOPS SCREW METAL CORP,INSERT NUT

螺紋襯套手動工具 SELF TAPPING THREADED INSERT MANUAL INSTALLATION TOOLS

襯套,螺紋襯套,自攻螺紋襯套,3孔襯套,3孔螺紋襯套,鐵襯套,白鐵襯套,銅襯套,襯套工具,手動工具,襯套,螺紋襯套,自攻螺紋襯套,3孔襯套,3孔螺紋襯套,鐵襯套,白鐵襯套,銅襯套,襯套工具,手動工具,螺?

SELF TAPPING THREADED INSERT

MANUAL INSTALLATION TOOLS
I. HOLE SIZE: 

RECOMMENDED HOLE SIZE IS INDICATED ON EACH DATA SHEET AND IS INTENDED TO BE FOR REFERENCE ONLY. HOLE SIZE MAY NEED TO BE INCREASED OR DECREASED DEPENDING ON BASE MATERIAL, INSTALLATION TORQUE OR PERFORMANCE REQUIRED. OPTIMUM HOLE SIZE SHOULD BE DETERMINED BY REQUESTING SAMPLES & INSTALLING THEM IN THE INTENDED MATERIAL.



II. HOLE DEPTH: 

IN THRU HOLE APPLICATIONS THE INSERT LENGTH SHOULD NOT EXCEED THE MATERIAL THICKNESS. IN BLIND HOLE APPLICATIONS THE HOLE DEPTH SHOULD BE 1.2XINSERT LENGTH AND THIS VALUE IS INDICATED ON MOST DATA SHEETS.



III. COUNTERSINK 

A 60°COUNTERSINK IS REQUIRED FOR MOST MATERIALS TO INSURE A FLUSH SURFACE AFTER INSTALLATION.



IV. WALL THICKNESS 

WALL THICKNESS SHOULD BE 0.35 TO 0.5 X HOLE DIAMETER DEPENDING ON BASE MATERIAL.



 OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
 
STEEL BLIND RIVET NUT, STAINLESS STEEL BLIND RIVET NUT, STAINLESS STEEL 316 BLIND RIVET,Fasteners, rivet nut, inserts, rivet, nuts, screws, bolts, studs, blind rivet nuts , self-clinching, bolt rivet nuts, e self-driving nut, self-tapping threaded inserts, sex bolts, PEM nut, binding post, Chicago screw, barrel nut, post, special blind rivet, security fastener, blind jack nut, welding stud, hardware parts, construction hardware,BLIND NUT, RIVET NUT, TOP SCREW METAL CORP, TOPS SCREW METAL CORP,INSERT NUT STEEL BLIND RIVET NUT, STAINLESS STEEL BLIND RIVET NUT, STAINLESS STEEL 316 BLIND RIVET,Fasteners, rivet nut, inserts, rivet, nuts, screws, bolts, studs, blind rivet nuts , self-clinching, bolt rivet nuts, e self-driving nut, self-tapping threaded inserts, sex bolts, PEM nut, binding post, Chicago screw, barrel nut, post, special blind rivet, security fastener, blind jack nut, welding stud, hardware parts, construction hardware,BLIND NUT, RIVET NUT, TOP SCREW METAL CORP, TOPS SCREW METAL CORP,INSERT NUT