TSC 8 BLIND PRESSED NUTS

TSC 8  BLIND PRESSED NUTS

TSC8-tq TSC8-DRAWING-tq

ADVANTAGES OF CLINCHING PARTS:

  • May be installed using any parallel acting squeezing force.
  • Provide high pushout and torque-out resistance.
  • Do not require special hole preparation, such as chamfering and deburring.
  • Reverse side of metal sheet remains flush.
  • No retapping necessary after application.
  • Low installed costs.

 

NUTS

Nuts with thread strengths greater than mild steel screws are commonly used wherever strong internal threads are needed for component attachment of fabrication assembly.

 

Other sizes, material are available upon request.

SELF CLINCHING PARTS SERIES-2-tq SELF CLINCHING PARTS SERIES-tq

Advertisements

TSC 7 SELF-CLINCHING STANDOFFS

TSC 7  SELF-CLINCHING STANDOFFS

TSC7-tq TSC7-DRAWING-tq

ADVANTAGES OF CLINCHING PARTS:

  • May be installed using any parallel acting squeezing force.
  • Provide high pushout and torque-out resistance.
  • Do not require special hole preparation, such as chamfering and deburring.
  • Reverse side of metal sheet remains flush.
  • No retapping necessary after application.
  • Low installed costs.

 

STANDOFFS

Used where it is necessary to stack or space components away from the panel.

Thru-threaded or blind types are generally standard.

 

Other sizes, material are available upon request.

SELF CLINCHING PARTS SERIES-2-tq SELF CLINCHING PARTS SERIES-tq

TSC 6 SELF-CLINCHING STUDS

TSC 6 SELF-CLINCHING STUDS

TSC6-tq TSC6-DRAWING-tq

MATERIAL AVAILABLE FOR SELF-CLINCHING STUDS: 

Steel, Stainless Steel

 

ADVANTAGES OF CLINCHING PARTS:

  • May be installed using any parallel acting squeezing force.
  • Provide high pushout and torque-out resistance.
  • Do not require special hole preparation, such as chamfering and deburring.
  • Reverse side of metal sheet remains flush.
  • No retapping necessary after application.
  • Low installed costs.

 

STUDS

Externally threaded fasteners which are used where the attachment must be positioned before being fastened.

 

Other sizes, material are available upon request.

SELF CLINCHING PARTS SERIES-2-tq SELF CLINCHING PARTS SERIES-tq

TSC 5 SELF-CLINCHING LOCK NUTS

TSC 5 SELF-CLINCHING LOCK NUTS

TSC5-tq TSC5-DRAWING-tq

ADVANTAGES OF CLINCHING PARTS:

  • May be installed using any parallel acting squeezing force.
  • Provide high pushout and torque-out resistance.
  • Do not require special hole preparation, such as chamfering and deburring.
  • Reverse side of metal sheet remains flush.
  • No retapping necessary after application.
  • Low installed costs.

 

NUTS

Nuts with thread strengths greater than mild steel screws are commonly used wherever strong internal.

Threads are needed for component attachment of fabrication assembly.

 

Other sizes, material are available upon request.

SELF CLINCHING PARTS SERIES-2-tq SELF CLINCHING PARTS SERIES-tq

TSC 4 SELF-CLINCHING NUTS

TSC 4  SELF-CLINCHING NUTS

TSC4-1-tq TSC4-DRAWING-tq

ADVANTAGES OF CLINCHING PARTS:

  • May be installed using any parallel acting squeezing force.
  • Provide high pushout and torque-out resistance.
  • Do not require special hole preparation, such as chamfering and deburring.
  • Reverse side of metal sheet remains flush.
  • No retapping necessary after application.
  • Low installed costs.

TSC4-INSTALLTION-tq

NUTS

Nuts with thread strengths greater than mild steel screws are commonly used wherever strong internal threads are needed for component attachment of fabrication assembly.

 

Other sizes, material are available upon request.

SELF CLINCHING PARTS SERIES-2-tq SELF CLINCHING PARTS SERIES-tq

TSC 1 SELF-CLINCHING STANDOFFS

TSC 1  SELF-CLINCHING STANDOFFS

TSC1-tq TSC1-DRAWING-tq

ADVANTAGES OF CLINCHING PARTS:

  • May be installed using any parallel acting squeezing force.
  • Provide high pushout and torque-out resistance.
  • Do not require special hole preparation, such as chamfering and deburring.
  • Reverse side of metal sheet remains flush.
  • No retapping necessary after application.
  • Low installed costs.

 

STANDOFFS

Used where it is necessary to stack or space components away from the panel.

Thru-threaded or blind types are generally standard.

 

 Other sizes, material are available upon request.

SELF CLINCHING PARTS SERIES-2-tq SELF CLINCHING PARTS SERIES-tq

GLASS BREAKER

GLASS BREAKER

THE BEST EQUIPMENT FOR ESCAPE

(Taiwan Patent No I 442953)

 

A IDEAL SAFETY DEVICE USED IN VEHICLES, HOME OR WORK PLACE TO BREAK THROUGH WINDOW GLASS IN AN EMERGENCY.

THIS ITEM WE DESIGN IT GOING TO BE USED IN THE BUS, CAR, BUILDING (ESPECIALLY FOR OFFICE BUILDING)..ETC.

GLASS BREAKER SERIES-tq

Usually the “GLASS BREAKER” is form as a pin and huge strength might be needed when using. However, our invention is to be designed as “PUSH DOWN” function which is easy when people during emergency situation.

 

 

FEATURES:

  • Practical for car use in emergency

  • Smashing window easy & quickly

  • Strong destruction

  • High quality

 

 

COMPARE:

NORMAL –

 EMERGENCY HAMMER

OUR PRODUCT –

GLASS BREAKER

 1.
  • Need take time to find tools

  • Always in the visible place

 2.
  • Need pound four corners of the

    window, then thump the center

  • Just “PUSH DOWN” the tool

 3.
  • Hardly to operate

  • Easy & fast to operate

 4.
  • Too heavy, easily to hurt users

  • Cannot injure users

 5.
  • Easily to be stolen

  • Suitable for all ages

 

★ CLICK ME TO SEE TEST OF GLASS BREAKER

 

 

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST