TSC 8 BLIND PRESSED NUTS

TSC 8  BLIND PRESSED NUTS

TSC8-tq TSC8-DRAWING-tq

ADVANTAGES OF CLINCHING PARTS:

  • May be installed using any parallel acting squeezing force.
  • Provide high pushout and torque-out resistance.
  • Do not require special hole preparation, such as chamfering and deburring.
  • Reverse side of metal sheet remains flush.
  • No retapping necessary after application.
  • Low installed costs.

 

NUTS

Nuts with thread strengths greater than mild steel screws are commonly used wherever strong internal threads are needed for component attachment of fabrication assembly.

 

Other sizes, material are available upon request.

SELF CLINCHING PARTS SERIES-2-tq SELF CLINCHING PARTS SERIES-tq

Advertisements

TSC 7 SELF-CLINCHING STANDOFFS

TSC 7  SELF-CLINCHING STANDOFFS

TSC7-tq TSC7-DRAWING-tq

ADVANTAGES OF CLINCHING PARTS:

  • May be installed using any parallel acting squeezing force.
  • Provide high pushout and torque-out resistance.
  • Do not require special hole preparation, such as chamfering and deburring.
  • Reverse side of metal sheet remains flush.
  • No retapping necessary after application.
  • Low installed costs.

 

STANDOFFS

Used where it is necessary to stack or space components away from the panel.

Thru-threaded or blind types are generally standard.

 

Other sizes, material are available upon request.

SELF CLINCHING PARTS SERIES-2-tq SELF CLINCHING PARTS SERIES-tq

TSC 6 SELF-CLINCHING STUDS

TSC 6 SELF-CLINCHING STUDS

TSC6-tq TSC6-DRAWING-tq

MATERIAL AVAILABLE FOR SELF-CLINCHING STUDS: 

Steel, Stainless Steel

 

ADVANTAGES OF CLINCHING PARTS:

  • May be installed using any parallel acting squeezing force.
  • Provide high pushout and torque-out resistance.
  • Do not require special hole preparation, such as chamfering and deburring.
  • Reverse side of metal sheet remains flush.
  • No retapping necessary after application.
  • Low installed costs.

 

STUDS

Externally threaded fasteners which are used where the attachment must be positioned before being fastened.

 

Other sizes, material are available upon request.

SELF CLINCHING PARTS SERIES-2-tq SELF CLINCHING PARTS SERIES-tq

TSC 5 SELF-CLINCHING LOCK NUTS

TSC 5 SELF-CLINCHING LOCK NUTS

TSC5-tq TSC5-DRAWING-tq

ADVANTAGES OF CLINCHING PARTS:

  • May be installed using any parallel acting squeezing force.
  • Provide high pushout and torque-out resistance.
  • Do not require special hole preparation, such as chamfering and deburring.
  • Reverse side of metal sheet remains flush.
  • No retapping necessary after application.
  • Low installed costs.

 

NUTS

Nuts with thread strengths greater than mild steel screws are commonly used wherever strong internal.

Threads are needed for component attachment of fabrication assembly.

 

Other sizes, material are available upon request.

SELF CLINCHING PARTS SERIES-2-tq SELF CLINCHING PARTS SERIES-tq

TSC 4 SELF-CLINCHING NUTS

TSC 4  SELF-CLINCHING NUTS

TSC4-1-tq TSC4-DRAWING-tq

ADVANTAGES OF CLINCHING PARTS:

  • May be installed using any parallel acting squeezing force.
  • Provide high pushout and torque-out resistance.
  • Do not require special hole preparation, such as chamfering and deburring.
  • Reverse side of metal sheet remains flush.
  • No retapping necessary after application.
  • Low installed costs.

TSC4-INSTALLTION-tq

NUTS

Nuts with thread strengths greater than mild steel screws are commonly used wherever strong internal threads are needed for component attachment of fabrication assembly.

 

Other sizes, material are available upon request.

SELF CLINCHING PARTS SERIES-2-tq SELF CLINCHING PARTS SERIES-tq

TSC 1 SELF-CLINCHING STANDOFFS

TSC 1  SELF-CLINCHING STANDOFFS

TSC1-tq TSC1-DRAWING-tq

ADVANTAGES OF CLINCHING PARTS:

  • May be installed using any parallel acting squeezing force.
  • Provide high pushout and torque-out resistance.
  • Do not require special hole preparation, such as chamfering and deburring.
  • Reverse side of metal sheet remains flush.
  • No retapping necessary after application.
  • Low installed costs.

 

STANDOFFS

Used where it is necessary to stack or space components away from the panel.

Thru-threaded or blind types are generally standard.

 

 Other sizes, material are available upon request.

SELF CLINCHING PARTS SERIES-2-tq SELF CLINCHING PARTS SERIES-tq

SELF CLINCHING SERIES

SELF CLINCHING SERIES 

TSC1 SELF CLINCHING STANDOFFS

★STANDOFFS:

USED WHERE IT IS NECESSARY TO STACK OR SPACE COMPONENTS AWAY FROM THE PANEL. THRU-THREADED OR BLIND TYPES ARE GENERALLY STANDARD. 

  

TSC4 SELF CLINCHING NUTS

★NUTS:

NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.

 

TSC5 SELF CLINCHING LOCK NUTS 

★NUTS:

NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.

 

TSC6 SELF CLINCHING STUDS

STUDS:

EXTERNALLY THREADED FASTENERS WHICH ARE USED WHERE THE ATTACHMENT MUST BE POSITIONED BEFORE BEING FASTENED.

  

TSC7 SELF CLINCHING STANDOFFS

★STANDOFFS:

USED WHERE IT IS NECESSARY TO STACK OR SPACE COMPONENTS AWAY FROM THE PANEL. THRU-THREADED OR BLIND TYPES ARE GENERALLY STANDARD. 

  

TSC8 SELF CLINCHING NUTS

★NUTS:

NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.

 

ADVANTAGES OF CLINCHING PARTS:

  • MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.

  • PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.

  • DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.

  • REVERSE SIDE OF METAL SHEET REMAINS FLUSH.

  • NO RETAPPING NECESSARY AFTER APPLICATION.

  • LOW INSTALLED COSTS.