SIX LOBE WITH PIN OR WITHOUT PIN SEX BOLTS – SECURITY SYSTEM

SIX LOBE WITH PIN OR WITHOUT PIN SEX BOLTS – SECURITY SYSTEM

SIX LOBE SERIES-tq SIX LOBE-1-tq

FEMALE NUT

six-lobe-female-drawing-tq

SIX LOBE – FEMALE NUT   ( IN INCH )
A H D L G THREADED
± 0.008 ± 0.011 ± 0.004 ± 0.01 ± 0.02
0.425 0.125 0.245 0.500 0.377 10-24
0.425 0.125 0.245 0.625 0.500 10-24

MALE SCREW

six-lobe-male-drawing-tq

SIX LOBE – MALE SCREW   ( IN INCH )
A H D1 L L1 THREADED
± 0.008 ± 0.008 ± 0.003 ± 0.01 ± 0.008
0.425 0.125 0.236 3/4 0.248 10-24
0.425 0.125 0.236 15/16 0.248 10-24
0.425 0.125 0.236 1-1/16 0.248 10-24
0.425 0.125 0.236 1-3/16 0.248 10-24
0.425 0.125 0.236 1-5/16 0.248 10-24
0.425 0.125 0.236 1-3/8 0.248 10-24

 

MATERIAL AVALIABLE:

STEEL, STAINLESS STEEL, ALUMINUM, BRASS

 

SURFACE FINSIH AVAILABLE:

 

ADOPT SPECIAL HEAD TYPE AND PUNCH ON THE DESIGN IN SCREW, HAVE SAFE, GUARD TAKE APART AND THEFT, OFFER FUNCTION PROTECTED TO DESTROY TO DEFENDING. GENERAL WRENCH SET IS ALL UNABLE TO DESMANTLE SUCH AS CROSS, STRAIGHT-LINE HEX KEY, TORX KEY ETC.

 

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

Advertisements

MULTIGRIP BLIND RIVET

BLIND THREADED RIVET

HIGH STRENGTH

MULTIGRIP BLIND RIVET

TM SERIES

MULTIGRIP-3(topquality) MULTIGRIP-1

MATERIAL AVAILABLE FOR MULTI-GROP BLIND RIVETS: 


RIVET BODY MATERIAL : ALUMINUM 5052.

MANDREL MATERIAL : STEEL / ZINC PLATED.

SUITABLE APPLICATION:

  • AUTOMOBILES, MOTORCYCLES, ELECTRICAL APPLIANCES, LIGHTING FIXTURES, ETC.
  • MAKES THE GAP OF JOINING OBJECTS EXPAND FIRST THEN RIVETS THEM CLOSELY.
  • IT WILL NOT BE LOOSENED BY SHANK.
  • THE INNER AND OUTER JOINS ARE GOOD LOOKING.
  • HELPS REDUCE STOCK RANGE.
  • PARTICULAR DOME HEADS ACCEPTABLE.
  • FINISH AVAILABLE IN A MULTIPLE OF COLORS.

MULTIGRIP-2(topquality)

OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

rivet(topquality)

TSC4 SELF CLINCHING NUTS

SELF CLINCHING PART

SELF CLINCHING NUTS

TSC4 SERIES

1(topquality) DOC122112

ADVANTAGES OF CLINCHING PARTS:

  •    PROVIDE STRONG THREADS IN METAL AS THIN AS 020″ / .51 MM.
  •    MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
  •    PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
  •    DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
  •    REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
  •    NO RETAPPING NECESSARY AFTER APPLICATION.
  •    LOW INSTALLED COSTS.

 – NUTS

NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.

4(topquality)

TSC1 SELF CLINCHING STANDOFF

SELF CLINCHING PARTS

SELF CLINCHING STANDOFF

TSC1 SERIES

1(topquality)

MATERIAL AVAILABLE FOR SELF CLINCHING STANDOFFS:

STEEL, STAINLESS STEEL, ALUMINUM

ADVANTAGES OF CLINCHING PARTS:

  • PROVIDE STRONG THREADS IN METAL AS THIN AS 020″ / .51 MM.
  • MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
  • PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
  • DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
  • REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
  • NO RETAPPING NECESSARY AFTER APPLICATION.
  • LOW INSTALLED COSTS.

 – STANDOFFS 

USED WHERE IT IS NECESSARY TO STACK OR SPACE COMPONENTS AWAY FROM THE PANEL. THRU-THREADED OR BLIND TYPES ARE GENERALLY STANDARD.

-OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

3(topquality) 4(topquality)

BLIND JACK NUTS

BLIND JACK NUTS

TJM & TJU SERIES

3(topquality)

THE BLIND JACK NUT IS AN ECONOMICAL BLIND FASTENER DESIGNED FOR ASSEMBLY LIND USE IN THIN, SOFT OR BRITTLE MATERIALS. WHEN TIGHTENED, THEIR BODY COLLAPSES TO FORM LEGS WHICH GRIP THE INSIDE OF THE MOUNTING SURFACE, LEAVING A PERMANENT REUSABLE THREADED INSERT. STANDARD BLIND JACK NUT ARE MANUFACTURED OF STEEL WITH A COMMERCIAL ZINC PLATING. ALL BLIND JACK NUTS CAN BE SUPPLIED WITH BRASS COATED WHICH ASSIST GALVANIC CORROSION CONCERNS.

MATERIAL AVAILABLE FOR BLIND JACK NUT: 
STEEL, STAINLESS STEEL

FEATURES:

  • FASTENS IN BLIND HOLES
  • FASTENS SECURELY DESPITE BURRS & UNEVEN SUBSTRATES
  • NOT HOLE SIZE SENSITIVE
  • SUITABLE FOR WIDE GRIP RANG

APPLICATIONS:

  • SPOILERS AND OTHER AERODYNAMIC DEVICES
  • LICENCE PLATE BRACKETS
  • HIGH-LAMP STOP LIGHTS
  • AIR CONDITIONING CONDENSERS
  • GLOVE COMPARTMENTS
  • SPEAKER HOUSINGS
  • LATH MOUNTINGS
  • TRUCK UTILITY COMPARTMENTS
  1. THREAD INSRT ONTO THE MANDREL OF INSTALLATION TOOL, THEN INSERT ALL THE WAY INTO PREDRILLED HOLE UNTIL FLANGE IS FIRMLY AGAINST MOUNTING SURFACE.
    2-1(topquality)
  2. FULLY COLLASPE INSERT, THEN REMOVE TOOL.
    2-2(topquality)
  3. PASS MACHINE SCREW THROUGH PART TO BE FASTENED, THEN TIGHTEN UNTIL SUNG.
    2-3(topquality)

– OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

BLIND JACK NUT TOOL 

AN ECONOMICAL, EASY TO USE TOOL FOR LOW-VOLUME INSTALLATION IN ANY MATERIAL. THREAD PULL-ROD INTO BLIND JACK NUT, INSERT INTO HOLE, AND SQUEEZE HANDLES TO SET. INTERCHANGEABLE PULL-OUT RODS AVAILABLE TO SET ALL SIZES. PNEUMATIC BLIND JACK NUT TOOL ALSO AVAILABLE.

JACK-NUT-SMALL(topquality)

1(topquality)

STRETCH FOLDING BLIND RIVET

STRETCH FOLDING BLIND RIVET

TS SERIES

 1(topquality) 3(topquality)

MATERIAL AVAILABLE FOR STRETCH FOLDING BLIND RIVETS: 

RIVET BODY MATERIAL : ALUMINUM 5052.

MANDREL MATERIAL : ALUMINUM 5056.

POSITIVE MANDREL RETENTION :

RATTLE FREE FASTENER

CORROSION RESISTANT:

ALL ALUMINUM CONSTRUCTION

MULTI GRIP:

  • ADJUSTS TO A WIDE VARIATION OF SUBJECT’S THICKNESS.
  • FINISH AVAILABLE IN A MULTIPLE OF COLOR.

SUITABLE APPLICATIONS:

  • SUPPORTS BRITTLE, THIN SOFT OR DUCTILE MATERIALS AND FUNCTIONS WHEN USED WITH OVERSIZED, MISALIGNED OR IRREGULARLY SHAPED HOLES.
  • THE STRETCH FOLDING BLIND RIVET FORMS THREE LARGE FOLDING LEGS THAT CREATE EXCELLENT CLAMPING-UP AND A LARGE BLIND SIDE BEARING SURFACE.

2(topquality)

HEXAGON RIVET NUT – FHSM & FHSI SERIES

HEXAGON RIVET NUT :

FHSM & FHSI SERIES

FULL-HEXAGON WITH SMALL FLANGE RIVET NUT

AND HEX FLANGE, ROUND INTERNAL HOLE, OPEN END

1(topquality)

MATERIAL AVAILABLE:

STEEL, STAINLESS STEEL 302( INOX A2/18-8) AND 316 ( INOX A418-10), BRASS, ALUMINUM 5056

SURFACE FINSIH AVAILABLE:
STEEL:CR3 WHITE/YELLOW/BLACK ZINC PLATED, CR3 ZINC NICKEL PLATED, NICKEL PLATED
STAINLESS STEEL: CLEAN OR PASSIVATED.
BRASS:CLEAN
ALUMINUM:CLEAN

CHARACTERISTICS OF SMALL FLANGE BLIND RIVET NUT

  • THE BLIND RIVET NUT HAS BEEN SPECIALLY DEVELOPED TO GIVE DESIGNERS A STRONG AND VIBRATION- PROOF STEEL THREAD IN THIN SHEET APPLICATIONS.
  • THE BLIND RIVET NUT CAN BE USED TO ASSEMBLE TWO OR MORE SHEETS OF VARIOUS MATERIALS (STEEL, ALUMINUM, WOOD, PLASTIC, ETC.) AND CAN BE FIXED BY A SCREW.
  • THE HEAD OF SMALL FLANGE BLIND RIVET NUT IS IN A COUNTERSUNK SHAPE THAT MAKES THE APPLICATION SURFACE FLAT AND SMOOTH AFTER INSTALLATION.
  • THE BLIND RIVET NUT IS FAST AND CONVENIENT IN INSTALLATION.
  • APPLICATION SURFACE FINISH WILL NOT BE DAMAGED AFTER INSTALLTION OF BLIND RIVET NUT.

THE BLIND RIVET NUT OFFERS THE FOLLOWING ADVANTAGES

  • EASY AND FAST INSTALLATION.
  • HIGH TORQUE AND STRONG THREADS ARE COMPARABLE TO NORMAL FASTENERS.

ASSEMBLY APPLICATIONS

  • AUTOMATIVE
  • ELECTRICAL ENGINEERING
  • SHEET METAL
  • GENERAL LIGHT FABRICATION

-OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

2(topquality)

3(topquality)