SECURITY SYSTEM SEX BOLTS – ONE WAY, SIX LOBE, E SELF DRIVING NUT, TRUSS COMBO HEAD, ARCHITECTURAL SEX BOLTS

SECURITY SYSTEM SEX BOLTS

ONE WAY SEX BOLTS

ONE WAY SERIES-2-tq

ONE WAY SERIES-1-tq

MATERIAL AVAILABLE: 

STEEL, STAINLESS STEEL, ALUMINUM, BRASS

OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

SIX LOBE WITH PIN SEX BOLT

SIX LOBE SERIES-tq

SIX LOBE-1-tq

MATERIAL AVAILABLE: 

STEEL, STAINLESS STEEL, ALUMINUM, BRASS

ADOPT SPECIAL HEAD TYPE AND PUNCH ON THE DESIGN IN SCREW, HAVE SAFE, GUARD TAKE APART AND THEFT, OFFER FUNCTION PROTECTED TO DESTROY TO DEFENDING. GENERAL WRENCH SET IS ALL UNABLE TO DISMANTLE SUCH AS CROSS, STRAIGHT-LINE HEX KEY, TORX KEY ETC.

OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

E SELF-DRIVING NUT

E SELF DRIVING NUT SERIES-tq

E SELF DRIVING NUT-3-tq

MATERIAL AVAILABLE: 

STEEL, STAINLESS STEEL, BRASS

ADVANTAGES:

 * Install sleeve nut to access front side of the work piece & screw in from back side.

 * Install without any complicated tool at any location on the assembly.

 * Install without producing any harmful mark.

 * Install into varies material.

 * The fangs on the body cut into the application during assembly.

 * Easy, fast & safe installation.

INSTRUCTIONS OF E-SELF DRIVING NUT:

As the sleeve nut is stalled, the fangs on the body actually cut into the application & provides grip strength. When screw on the opposite side have driven, the fangs will grip application tightly.

FEATURE OF E-SELF DRIVING NUT

(COMPARE WITH SEX BOLTS)

1. ROUND BODY WITH FANGS ON IT

 * Grip the application thghtly

 * Cannot be disassembled easily

 * Prevent any one who intent to pull out

2. SCREW HEAD CAN BE YOUR CHOICE

 * The screw head can be tamper-proof

 * Hardly to disassembled

 * Combine with good surface outlook

OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

TRUSS COMBO HEAD POST SCREW

TRUSS COMBO HEAD POST SCREW SERIES-tq

TRUSS COMBO HEAD POST SCREW-1-tq

MATERIAL AVAILABLE: 

STEEL, STAINLESS STEEL, ALUMINUM, BRASS

OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

ARCHITECTURAL SEX BOLTS

ARCHITECTURAL SEX BOLTS-1-tq

ARCHITECTURAL SEX BOLTS-2-tq

MATERIAL AVAILABLE: 

STEEL, STAINLESS STEEL, ALUMINUM, BRASS

FEATURES & ADVANTAGES: 

 * No way to turn the sex bolts, because Architectural Sex Bolts have smooth Truss Heads – NO DRIVE.

 * The knurled barrel keeps the sex bolt from spinning while the flat head screw is tighteded from the other side.

 * Strong, secure, easy to assemble.

 * Good looking solution for many sheet metal anchoring applications.

 * Particular useful in fiberglass marine applications.

APPLICATIONS: 

 * Door and Lock Accessory Mounts

 * Hurricane Protection Shutters

 * Elevator Protection Gates

 * HVAC Ventilation

 * Docks and Construction Projects

 * Architectural – Railings, Cabinetry, Shutters, Seats, and more.

OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

TSC 8 BLIND PRESSED NUTS

TSC 8  BLIND PRESSED NUTS

TSC8-tq TSC8-DRAWING-tq

ADVANTAGES OF CLINCHING PARTS:

  • May be installed using any parallel acting squeezing force.
  • Provide high pushout and torque-out resistance.
  • Do not require special hole preparation, such as chamfering and deburring.
  • Reverse side of metal sheet remains flush.
  • No retapping necessary after application.
  • Low installed costs.

 

NUTS

Nuts with thread strengths greater than mild steel screws are commonly used wherever strong internal threads are needed for component attachment of fabrication assembly.

 

Other sizes, material are available upon request.

SELF CLINCHING PARTS SERIES-2-tq SELF CLINCHING PARTS SERIES-tq

TSC 7 SELF-CLINCHING STANDOFFS

TSC 7  SELF-CLINCHING STANDOFFS

TSC7-tq TSC7-DRAWING-tq

ADVANTAGES OF CLINCHING PARTS:

  • May be installed using any parallel acting squeezing force.
  • Provide high pushout and torque-out resistance.
  • Do not require special hole preparation, such as chamfering and deburring.
  • Reverse side of metal sheet remains flush.
  • No retapping necessary after application.
  • Low installed costs.

 

STANDOFFS

Used where it is necessary to stack or space components away from the panel.

Thru-threaded or blind types are generally standard.

 

Other sizes, material are available upon request.

SELF CLINCHING PARTS SERIES-2-tq SELF CLINCHING PARTS SERIES-tq

TSC 5 SELF-CLINCHING LOCK NUTS

TSC 5 SELF-CLINCHING LOCK NUTS

TSC5-tq TSC5-DRAWING-tq

ADVANTAGES OF CLINCHING PARTS:

  • May be installed using any parallel acting squeezing force.
  • Provide high pushout and torque-out resistance.
  • Do not require special hole preparation, such as chamfering and deburring.
  • Reverse side of metal sheet remains flush.
  • No retapping necessary after application.
  • Low installed costs.

 

NUTS

Nuts with thread strengths greater than mild steel screws are commonly used wherever strong internal.

Threads are needed for component attachment of fabrication assembly.

 

Other sizes, material are available upon request.

SELF CLINCHING PARTS SERIES-2-tq SELF CLINCHING PARTS SERIES-tq

TSC 4 SELF-CLINCHING NUTS

TSC 4  SELF-CLINCHING NUTS

TSC4-1-tq TSC4-DRAWING-tq

ADVANTAGES OF CLINCHING PARTS:

  • May be installed using any parallel acting squeezing force.
  • Provide high pushout and torque-out resistance.
  • Do not require special hole preparation, such as chamfering and deburring.
  • Reverse side of metal sheet remains flush.
  • No retapping necessary after application.
  • Low installed costs.

TSC4-INSTALLTION-tq

NUTS

Nuts with thread strengths greater than mild steel screws are commonly used wherever strong internal threads are needed for component attachment of fabrication assembly.

 

Other sizes, material are available upon request.

SELF CLINCHING PARTS SERIES-2-tq SELF CLINCHING PARTS SERIES-tq

SELF CLINCHING SERIES

SELF CLINCHING SERIES 

TSC1 SELF CLINCHING STANDOFFS

★STANDOFFS:

USED WHERE IT IS NECESSARY TO STACK OR SPACE COMPONENTS AWAY FROM THE PANEL. THRU-THREADED OR BLIND TYPES ARE GENERALLY STANDARD. 

  

TSC4 SELF CLINCHING NUTS

★NUTS:

NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.

 

TSC5 SELF CLINCHING LOCK NUTS 

★NUTS:

NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.

 

TSC6 SELF CLINCHING STUDS

STUDS:

EXTERNALLY THREADED FASTENERS WHICH ARE USED WHERE THE ATTACHMENT MUST BE POSITIONED BEFORE BEING FASTENED.

  

TSC7 SELF CLINCHING STANDOFFS

★STANDOFFS:

USED WHERE IT IS NECESSARY TO STACK OR SPACE COMPONENTS AWAY FROM THE PANEL. THRU-THREADED OR BLIND TYPES ARE GENERALLY STANDARD. 

  

TSC8 SELF CLINCHING NUTS

★NUTS:

NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.

 

ADVANTAGES OF CLINCHING PARTS:

  • MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.

  • PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.

  • DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.

  • REVERSE SIDE OF METAL SHEET REMAINS FLUSH.

  • NO RETAPPING NECESSARY AFTER APPLICATION.

  • LOW INSTALLED COSTS.

MULTIGRIP BLIND RIVET

BLIND THREADED RIVET

HIGH STRENGTH

MULTIGRIP BLIND RIVET

TM SERIES

MULTIGRIP-3(topquality) MULTIGRIP-1

MATERIAL AVAILABLE FOR MULTI-GROP BLIND RIVETS: 


RIVET BODY MATERIAL : ALUMINUM 5052.

MANDREL MATERIAL : STEEL / ZINC PLATED.

SUITABLE APPLICATION:

  • AUTOMOBILES, MOTORCYCLES, ELECTRICAL APPLIANCES, LIGHTING FIXTURES, ETC.
  • MAKES THE GAP OF JOINING OBJECTS EXPAND FIRST THEN RIVETS THEM CLOSELY.
  • IT WILL NOT BE LOOSENED BY SHANK.
  • THE INNER AND OUTER JOINS ARE GOOD LOOKING.
  • HELPS REDUCE STOCK RANGE.
  • PARTICULAR DOME HEADS ACCEPTABLE.
  • FINISH AVAILABLE IN A MULTIPLE OF COLORS.

MULTIGRIP-2(topquality)

OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

rivet(topquality)