TSC5 SELF CLINCHING LOCK NUT

SELF CLINCHING PARTS

TSC5 SELF CLINCHING LOCK NUT

1(topquality)

MATERIAL AVAILABLE FOR SELF CLINCHING LOCK NUT:

STEEL, STAINLESS STEEL, ALUMINUM AND BRASS

 

ADVANTAGES OF CLINCHING PARTS:

1. PROVIDE STRONG THREADS IN METAL AS THIN AS 020″ / .51 MM.

2. MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.

3. PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.

4. DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.

5. REVERSE SIDE OF METAL SHEET REMAINS FLUSH.

6. NO RETAPPING NECESSARY AFTER APPLICATION.

7. LOW INSTALLED COSTS.

 – NUTS

NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.

 

-OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

3(topquality)

4(topquality)

E-SELF DRIVING NUT

E-SELF DRIVING NUT

 E-SELF DRINV NUT-專門圖2(topquality)

MATERIAL

STEEL, STAINLESS STEEL, BRASS, AND ALUMINUM

ADVANTAGE OF USING E-SELF DRIVING NUT

  • SECURITY
  • LABOUR SAVING
  • FAST & EASY INSTALLATION
  • PERFECT SURFACE OUTLOOK
  • INSTALL INTO VARIES MATERIAL
  • WITHOUT PRODUCING ANY HARMFUL MARK

INSTRUCTIONS OF E-SELF DRIVING NUT

As the sleeve nut is installed, the fangs on the body actually cut into the application & provides grip strength. When screw on the opposite side has driven, the fangs will grip application tightly.

1

FEATURE OF E-SELF DRIVING NUT

(COMPARE WITH SEX BOLTS)

1.    ROUND BODY WITH FANGS ON IT

  • GRIP THE APPLICATION TIGHTLY
  • CANNOT BE DISASSEMBLED EASILY
  • PREVENT ANY ONE WHO INTENT TO PULL OUT

2.    SCREW HEAD CAN BE YOUR CHOICE

  • THE SCREW HEAD CAN BE TAMPERPROOF
  • HARDLY TO DISASSEMBLED
  • COMBINE WITH GOOD SURFACE OUTLOOK

E-SELF DRINV NUT-專門圖1(topquality)

5

DOUBLE EFFECT OF ANTI-THEFT

YOUR BEST CHOICE

Page0001

EXPANSION ANCHOR

EXPANSION ANCHORS ARE TYPICALLY REQUIRED TO JOIN OBJECTS IN CONCRETE OR MASONRY.  THESE BOLTS CONSIST OF A STEEL CASING WITH FINS AT ONE END, AND A STANDARD SCREW INSERTED IN THE CENTER OF THE CASING.  INSTALLERS START BY DRILLING A HOLE, THEN INSERT THE BOLT BY HAND.  ONCE THE BOLT IS IN PLACE, A SCREWDRIVER OR DRILL IS USED TO TIGHTEN THE SCREW.  THIS PULLS THE SCREW UP INSIDE THE FINS OF THE BOLT, FORCING THESE FINS OUT TO THE SIDES.
USERS SHOULD KEEP IN MIND THAT AN EXPANSION ANCHOR IS ONLY AS STRONG AS THE MATERIAL IN WHICH IT IS INSTALLED.  THIS MEANS THAT AN EXPANSION ANCHOR WILL NOT HOLD IF THE SURROUNDING SURFACE IS WEAK OR BADLY DAMAGED.  EXPANSION ANCHORS MAY NOT BE SUITABLE FOR USE IN DAMAGED OR CRUMBLING CONCRETE OR SOFTER WOODS.

CNC Machining Part

CNC stands for computer numerical control, and refers specifically to a computer “controller” that reads code instructions and drives the machine tool, a powered mechanical device typically used to fabricate metal components by the selective removal of metal.  Our company could produce different kind of CNC PARTS by customer’s requirement.
Materials used: Aluminum, Stainless Steel, Titanium, Alloy Steels, Carbon Steels & Copper