TSC5 SELF CLINCHING LOCK NUT

SELF CLINCHING PARTS

TSC5 SELF CLINCHING LOCK NUT

1(topquality)

MATERIAL AVAILABLE FOR SELF CLINCHING LOCK NUT:

STEEL, STAINLESS STEEL, ALUMINUM AND BRASS

 

ADVANTAGES OF CLINCHING PARTS:

1. PROVIDE STRONG THREADS IN METAL AS THIN AS 020″ / .51 MM.

2. MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.

3. PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.

4. DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.

5. REVERSE SIDE OF METAL SHEET REMAINS FLUSH.

6. NO RETAPPING NECESSARY AFTER APPLICATION.

7. LOW INSTALLED COSTS.

 – NUTS

NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.

 

-OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

3(topquality)

4(topquality)

TSC6 SELF CLINCHING STUD

(nnovacera / bolts and nuts / screw / fastener)

SELF CLINCHING PARTS

SELF CLINCHING STUD

TSC6

1(topquality) 2

MATERIAL: STEEL

PLATING: ZINC PLATED

ADVANTAGES OF CLINCHING PARTS:

1. PROVIDE STRONG THREADS IN METAL AS THIN AS 020″ / .51 MM.
2. MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
3. PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
4. DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
5. REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
6. NO RETAPPING NECESSARY AFTER APPLICATION.
7. LOW INSTALLED COSTS.

 STUDS

EXTERNALLY THREADED FASTENERS WHICH ARE USED WHERE THE ATTACHMENT MUST BE POSITIONED BEFORE BEING FASTENED.

3(topquality) 4(topquality)

SELF-CLINCHING STUDS-TSC6

SELF-CLINCHING STUDS’S HEAD SHAPE IS ROUND AND HEXAGON, BELOW THE HEAD IS A CASTLE SHAPED GROOVES.

SELF-CLINCHING ARE PRESSED INTO A HOLE IN A SHEET TO BE INSTALLED, IT WITH HIGH TORQURE-OUT AND PUSHOUT RESISTANCE, WHICH REACHED SAVE TIME AND EFFORT, SAVE SPACE, AND SAVE MONEY.

SELF-CLINCHING STUDS CAN BE WIDELY USED IN MOBILE PHONES, DIGITAL CAMERAS, MP3, DV, V8, REMOTE CONTROL, AUDIO AND ELECTRICAL SWITCHES, CONTROL PANELS AND OTHER PRODUCTS OF THE SHELL.

INSTALL SELF-CLINCHING STUDS DO NOT NEED SPECIAL DRILL HOLE.

TOP QUALITY CAN PROVIDE STEEL, STAINLESS STEEL, AND OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST.

GROOVED PIN

GROOVED PIN

PROOVED PINS ARE NON-THREADED PRESS FIT FASTENERS THAT COMBINE  HOLDING POWER, SHOCK RESISTANCE AND EASY TO INSTALL. PROOVED PINS ARE SOLID CYLINDRICAL PIN WITH THREE LONGITUDINCAL GROOVES, MANUFACTURED FORM BAR OR COIL STOCK.

ADVANTAGE OF GROOVED PIN:

  • GROOVED PINS ARE SOLID
  • THERE ARE DIFFERENT GROOVE TYPES FOR A WIDE RANGE OF APPLICATIONS.
  • ONLY REQUIRE A STRAIGHT DRILLED HOLE.
  • EASY TO INSTALL AND QUICK TO ASSEMBLY.
  • REMOVABLE AND REUSABLE.

(DIMENSIONS IN INCH)

Nominal size
or Basic Pin Diameter
D A B E R G H I K
PIN
DIAMETER
PILOT
LENGTH
CHAMFER
LENGTH
CROWN
HEIGHT
CROWM
RADIUS
NECK
WIDTH
SHOULDER
LENGTH
NECK
RADIUS
NECK
DIAMETER
MAX MIN REF MIN NOM MAX MIN MAX MIN MAX MIN REF MAX MIN
1/326     0.0312 0.0312 0.0291 0.015                      
3/646    0.0469 0.0469 0.0454 0.031                      
1/16     0.0625 0.0625 0.061 0.031 0.005 0.0065 0.088 0.068              
5/646    0.0781 0.0781 0.0766 0.031 0.005 0.0087 0.104 0.084              
3/32     0.0938 0.0938 0.0923 0.031 0.005 0.0091 0.135 0.115 0.038 0.028 0.041 0.031 0.016 0.067 0.057
7/646      0.1094 0.1094 0.1074 0.031 0.005 0.011 0.150 0.130 0.038 0.028 0.041 0.031 0.016 0.082 0.027
1/8      0.1250 0.125 0.123 0.031 0.005 0.013 0.166 0.146 0.069 0.059 0.041 0.031 0.031 0.088 0.078
5/32    0.1563 0.1563 0.1543 0.062 0.005 0.017 0.198 0.178 0.069 0.059 0.057 0.047 0.031 0.109 0.099
3/16    0.1875 0.1875 0.1855 0.062 0.016 0.018 0.26 0.24 0.069 0.059 0.057 0.047 0.031 0.13 0.12
7/32    0.2188 0.2188 0.2168 0.062 0.016 0.022 0.291 0.271 0.101 0.091 0.072 0.062 0.047 0.151 0.141
1/4     0.2500 0.25 0.248 0.062 0.016 0.026 0.322 0.302 0.101 0.091 0.072 0.062 0.047 0.172 0.162
5/16   0.3125. 0.3125 0.3105 0.094 0.031 0.034 0.385 0.365 0.132 0.122 0.104 0.094 0.062 0.214 0.204
3/58   0.3750 0.375 0.373 0.094 0.031 0.039 0.479 0.459 0.132 0.122 0.135 0.125 0.062 0.255 0.245
7/16   0.4375 0.4375 0.4355 0.094 0.031 0.047 0.541 0.521 0.195 0.185 0.135 0.125 0.094 0.298 0.288
1/2    0.5000 0.5 0.498 0.094 0.031 0.052 0.635 0.615 0.195 0.185 0.135 0.125 0.094 0.317 0.307
GROOVED PINS DIMENSIONS
GROOVE
LENGTH
NOMINAL SIZRE
1/32 3/64 1/16 5/64 3/32 7/64 1/8 5/32 3/16 7/32 1/4 5/16 3/8 7/16 1/2
DX EXPANDED PIN DIAMETER
+-0.0015 +-0.002 +-0.0025 +-0.03
0.125 0.035 0.051 0.068 0.084 0.101 0.117 0.134                
0.188 0.035 0.051 0.068 0.084 0.101 0.117 0.134 0.166 0.198            
0.25 0.035 0.051 0.068 0.084 0.101 0.117 0.134 0.166 0.198 0.23 0.263        
0.312 0.035 0.051 0.068 0.084 0.101 0.117 0.134 0.166 0.198 0.23 0.263 0.329      
0.375 0.035 0.051 0.068 0.084 0.101 0.117 0.134 0.166 0.198 0.23 0.263 0.329 0.394    
0.438 0.035 0.051 0.068 0.084 0.101 0.117 0.134 0.166 0.198 0.23 0.263 0.329 0.394 0.459  
0.5 0.035 0.051 0.068 0.084 0.101 0.117 0.134 0.166 0.198 0.23 0.263 0.329 0.394 0.459 0.525
0.562   0.051 0.068 0.084 0.101 0.117 0.134 0.166 0.198 0.23 0.263 0.329 0.394 0.459 0.525
0.625   0.051 0.068 0.084 0.101 0.117 0.134 0.166 0.198 0.23 0.263 0.329 0.394 0.459 0.525
0.75     0.067 0.083 0.1 0.116 0.134 0.166 0.198 0.23 0.263 0.329 0.394 0.459 0.525
0.875     0.067 0.083 0.1 0.116 0.133 0.165 0.198 0.23 0.263 0.329 0.394 0.459 0.525
1     0.067 0.083 0.1 0.116 0.133 0.165 0.198 0.23 0.263 0.329 0.394 0.459 0.525
1.125         0.1 0.116 0.132 0.164 0.197 0.23 0.263 0.329 0.394 0.459 0.525
1.25         0.1 0.116 0.132 0.164 0.197 0.23 0.263 0.329 0.394 0.459 0.525
1.375             0.132 0.164 0.197 0.229 0.262 0.329 0.394 0.459 0.525
1.5             0.132 0.164 0.197 0.229 0.262 0.329 0.394 0.459 0.525
1.625               0.163 0.197 0.229 0.262 0.328 0.393 0.459 0.525
1.75               0.163 0.197 0.229 0.262 0.328 0.393 0.459 0.525
1.875               0.163 0.196 0.229 0.262 0.328 0.393 0.458 0.525
2               0.163 0.196 0.229 0.262 0.328 0.393 0.458 0.525
2.125                 0.196 0.229 0.262 0.328 0.393 0.458 0.524
2.25                 0.196 0.229 0.262 0.328 0.393 0.458 0.524
2.5                   0.228 0.261 0.327 0.393 0.458 0.524
2.75                   0.228 0.261 0.327 0.393 0.458 0.524
3                   0.227 0.26 0.327 0.392 0.457 0.523
3.25                     0.26 0.326 0.392 0.457 0.523
3.5                       0.326 0.391 0.456 0.522
3.75                         0.391 0.456 0.522
4                         0.39 0.455 0.521
4.25                         0.39 0.455 0.521
4.5                           0.454 0.52
seed
note 1
2 2   2   2                  

THERE HAS THREE HALF-LENGTH GROOVES AND SUITABLE FOR USE IN BOTH BLIND AND THROUGH HOLES AS A SPRING ANCHOE PIN.

INSTALLATOION METHOD:

     DRILLED AND DEAMED HOLE

PRESS OR DRIVE INTO PLACE

LOCK SECURELY AND EASY TO SEPARATE.