BLIND JACK NUTS

BLIND JACK NUTS

TJM & TJU SERIES

3(topquality)

THE BLIND JACK NUT IS AN ECONOMICAL BLIND FASTENER DESIGNED FOR ASSEMBLY LIND USE IN THIN, SOFT OR BRITTLE MATERIALS. WHEN TIGHTENED, THEIR BODY COLLAPSES TO FORM LEGS WHICH GRIP THE INSIDE OF THE MOUNTING SURFACE, LEAVING A PERMANENT REUSABLE THREADED INSERT. STANDARD BLIND JACK NUT ARE MANUFACTURED OF STEEL WITH A COMMERCIAL ZINC PLATING. ALL BLIND JACK NUTS CAN BE SUPPLIED WITH BRASS COATED WHICH ASSIST GALVANIC CORROSION CONCERNS.

MATERIAL AVAILABLE FOR BLIND JACK NUT: 
STEEL, STAINLESS STEEL

FEATURES:

  • FASTENS IN BLIND HOLES
  • FASTENS SECURELY DESPITE BURRS & UNEVEN SUBSTRATES
  • NOT HOLE SIZE SENSITIVE
  • SUITABLE FOR WIDE GRIP RANG

APPLICATIONS:

  • SPOILERS AND OTHER AERODYNAMIC DEVICES
  • LICENCE PLATE BRACKETS
  • HIGH-LAMP STOP LIGHTS
  • AIR CONDITIONING CONDENSERS
  • GLOVE COMPARTMENTS
  • SPEAKER HOUSINGS
  • LATH MOUNTINGS
  • TRUCK UTILITY COMPARTMENTS
  1. THREAD INSRT ONTO THE MANDREL OF INSTALLATION TOOL, THEN INSERT ALL THE WAY INTO PREDRILLED HOLE UNTIL FLANGE IS FIRMLY AGAINST MOUNTING SURFACE.
    2-1(topquality)
  2. FULLY COLLASPE INSERT, THEN REMOVE TOOL.
    2-2(topquality)
  3. PASS MACHINE SCREW THROUGH PART TO BE FASTENED, THEN TIGHTEN UNTIL SUNG.
    2-3(topquality)

– OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

BLIND JACK NUT TOOL 

AN ECONOMICAL, EASY TO USE TOOL FOR LOW-VOLUME INSTALLATION IN ANY MATERIAL. THREAD PULL-ROD INTO BLIND JACK NUT, INSERT INTO HOLE, AND SQUEEZE HANDLES TO SET. INTERCHANGEABLE PULL-OUT RODS AVAILABLE TO SET ALL SIZES. PNEUMATIC BLIND JACK NUT TOOL ALSO AVAILABLE.

JACK-NUT-SMALL(topquality)

1(topquality)

STRETCH FOLDING BLIND RIVET

STRETCH FOLDING BLIND RIVET

TS SERIES

 1(topquality) 3(topquality)

MATERIAL AVAILABLE FOR STRETCH FOLDING BLIND RIVETS: 

RIVET BODY MATERIAL : ALUMINUM 5052.

MANDREL MATERIAL : ALUMINUM 5056.

POSITIVE MANDREL RETENTION :

RATTLE FREE FASTENER

CORROSION RESISTANT:

ALL ALUMINUM CONSTRUCTION

MULTI GRIP:

  • ADJUSTS TO A WIDE VARIATION OF SUBJECT’S THICKNESS.
  • FINISH AVAILABLE IN A MULTIPLE OF COLOR.

SUITABLE APPLICATIONS:

  • SUPPORTS BRITTLE, THIN SOFT OR DUCTILE MATERIALS AND FUNCTIONS WHEN USED WITH OVERSIZED, MISALIGNED OR IRREGULARLY SHAPED HOLES.
  • THE STRETCH FOLDING BLIND RIVET FORMS THREE LARGE FOLDING LEGS THAT CREATE EXCELLENT CLAMPING-UP AND A LARGE BLIND SIDE BEARING SURFACE.

2(topquality)

HEXAGON RIVET NUT – FHSM & FHSI SERIES

HEXAGON RIVET NUT :

FHSM & FHSI SERIES

FULL-HEXAGON WITH SMALL FLANGE RIVET NUT

AND HEX FLANGE, ROUND INTERNAL HOLE, OPEN END

1(topquality)

MATERIAL AVAILABLE:

STEEL, STAINLESS STEEL 302( INOX A2/18-8) AND 316 ( INOX A418-10), BRASS, ALUMINUM 5056

SURFACE FINSIH AVAILABLE:
STEEL:CR3 WHITE/YELLOW/BLACK ZINC PLATED, CR3 ZINC NICKEL PLATED, NICKEL PLATED
STAINLESS STEEL: CLEAN OR PASSIVATED.
BRASS:CLEAN
ALUMINUM:CLEAN

CHARACTERISTICS OF SMALL FLANGE BLIND RIVET NUT

  • THE BLIND RIVET NUT HAS BEEN SPECIALLY DEVELOPED TO GIVE DESIGNERS A STRONG AND VIBRATION- PROOF STEEL THREAD IN THIN SHEET APPLICATIONS.
  • THE BLIND RIVET NUT CAN BE USED TO ASSEMBLE TWO OR MORE SHEETS OF VARIOUS MATERIALS (STEEL, ALUMINUM, WOOD, PLASTIC, ETC.) AND CAN BE FIXED BY A SCREW.
  • THE HEAD OF SMALL FLANGE BLIND RIVET NUT IS IN A COUNTERSUNK SHAPE THAT MAKES THE APPLICATION SURFACE FLAT AND SMOOTH AFTER INSTALLATION.
  • THE BLIND RIVET NUT IS FAST AND CONVENIENT IN INSTALLATION.
  • APPLICATION SURFACE FINISH WILL NOT BE DAMAGED AFTER INSTALLTION OF BLIND RIVET NUT.

THE BLIND RIVET NUT OFFERS THE FOLLOWING ADVANTAGES

  • EASY AND FAST INSTALLATION.
  • HIGH TORQUE AND STRONG THREADS ARE COMPARABLE TO NORMAL FASTENERS.

ASSEMBLY APPLICATIONS

  • AUTOMATIVE
  • ELECTRICAL ENGINEERING
  • SHEET METAL
  • GENERAL LIGHT FABRICATION

-OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

2(topquality)

3(topquality)

GROOVED PIN

GROOVED PIN

PROOVED PINS ARE NON-THREADED PRESS FIT FASTENERS THAT COMBINE  HOLDING POWER, SHOCK RESISTANCE AND EASY TO INSTALL. PROOVED PINS ARE SOLID CYLINDRICAL PIN WITH THREE LONGITUDINCAL GROOVES, MANUFACTURED FORM BAR OR COIL STOCK.

ADVANTAGE OF GROOVED PIN:

  • GROOVED PINS ARE SOLID
  • THERE ARE DIFFERENT GROOVE TYPES FOR A WIDE RANGE OF APPLICATIONS.
  • ONLY REQUIRE A STRAIGHT DRILLED HOLE.
  • EASY TO INSTALL AND QUICK TO ASSEMBLY.
  • REMOVABLE AND REUSABLE.

(DIMENSIONS IN INCH)

Nominal size
or Basic Pin Diameter
D A B E R G H I K
PIN
DIAMETER
PILOT
LENGTH
CHAMFER
LENGTH
CROWN
HEIGHT
CROWM
RADIUS
NECK
WIDTH
SHOULDER
LENGTH
NECK
RADIUS
NECK
DIAMETER
MAX MIN REF MIN NOM MAX MIN MAX MIN MAX MIN REF MAX MIN
1/326     0.0312 0.0312 0.0291 0.015                      
3/646    0.0469 0.0469 0.0454 0.031                      
1/16     0.0625 0.0625 0.061 0.031 0.005 0.0065 0.088 0.068              
5/646    0.0781 0.0781 0.0766 0.031 0.005 0.0087 0.104 0.084              
3/32     0.0938 0.0938 0.0923 0.031 0.005 0.0091 0.135 0.115 0.038 0.028 0.041 0.031 0.016 0.067 0.057
7/646      0.1094 0.1094 0.1074 0.031 0.005 0.011 0.150 0.130 0.038 0.028 0.041 0.031 0.016 0.082 0.027
1/8      0.1250 0.125 0.123 0.031 0.005 0.013 0.166 0.146 0.069 0.059 0.041 0.031 0.031 0.088 0.078
5/32    0.1563 0.1563 0.1543 0.062 0.005 0.017 0.198 0.178 0.069 0.059 0.057 0.047 0.031 0.109 0.099
3/16    0.1875 0.1875 0.1855 0.062 0.016 0.018 0.26 0.24 0.069 0.059 0.057 0.047 0.031 0.13 0.12
7/32    0.2188 0.2188 0.2168 0.062 0.016 0.022 0.291 0.271 0.101 0.091 0.072 0.062 0.047 0.151 0.141
1/4     0.2500 0.25 0.248 0.062 0.016 0.026 0.322 0.302 0.101 0.091 0.072 0.062 0.047 0.172 0.162
5/16   0.3125. 0.3125 0.3105 0.094 0.031 0.034 0.385 0.365 0.132 0.122 0.104 0.094 0.062 0.214 0.204
3/58   0.3750 0.375 0.373 0.094 0.031 0.039 0.479 0.459 0.132 0.122 0.135 0.125 0.062 0.255 0.245
7/16   0.4375 0.4375 0.4355 0.094 0.031 0.047 0.541 0.521 0.195 0.185 0.135 0.125 0.094 0.298 0.288
1/2    0.5000 0.5 0.498 0.094 0.031 0.052 0.635 0.615 0.195 0.185 0.135 0.125 0.094 0.317 0.307
GROOVED PINS DIMENSIONS
GROOVE
LENGTH
NOMINAL SIZRE
1/32 3/64 1/16 5/64 3/32 7/64 1/8 5/32 3/16 7/32 1/4 5/16 3/8 7/16 1/2
DX EXPANDED PIN DIAMETER
+-0.0015 +-0.002 +-0.0025 +-0.03
0.125 0.035 0.051 0.068 0.084 0.101 0.117 0.134                
0.188 0.035 0.051 0.068 0.084 0.101 0.117 0.134 0.166 0.198            
0.25 0.035 0.051 0.068 0.084 0.101 0.117 0.134 0.166 0.198 0.23 0.263        
0.312 0.035 0.051 0.068 0.084 0.101 0.117 0.134 0.166 0.198 0.23 0.263 0.329      
0.375 0.035 0.051 0.068 0.084 0.101 0.117 0.134 0.166 0.198 0.23 0.263 0.329 0.394    
0.438 0.035 0.051 0.068 0.084 0.101 0.117 0.134 0.166 0.198 0.23 0.263 0.329 0.394 0.459  
0.5 0.035 0.051 0.068 0.084 0.101 0.117 0.134 0.166 0.198 0.23 0.263 0.329 0.394 0.459 0.525
0.562   0.051 0.068 0.084 0.101 0.117 0.134 0.166 0.198 0.23 0.263 0.329 0.394 0.459 0.525
0.625   0.051 0.068 0.084 0.101 0.117 0.134 0.166 0.198 0.23 0.263 0.329 0.394 0.459 0.525
0.75     0.067 0.083 0.1 0.116 0.134 0.166 0.198 0.23 0.263 0.329 0.394 0.459 0.525
0.875     0.067 0.083 0.1 0.116 0.133 0.165 0.198 0.23 0.263 0.329 0.394 0.459 0.525
1     0.067 0.083 0.1 0.116 0.133 0.165 0.198 0.23 0.263 0.329 0.394 0.459 0.525
1.125         0.1 0.116 0.132 0.164 0.197 0.23 0.263 0.329 0.394 0.459 0.525
1.25         0.1 0.116 0.132 0.164 0.197 0.23 0.263 0.329 0.394 0.459 0.525
1.375             0.132 0.164 0.197 0.229 0.262 0.329 0.394 0.459 0.525
1.5             0.132 0.164 0.197 0.229 0.262 0.329 0.394 0.459 0.525
1.625               0.163 0.197 0.229 0.262 0.328 0.393 0.459 0.525
1.75               0.163 0.197 0.229 0.262 0.328 0.393 0.459 0.525
1.875               0.163 0.196 0.229 0.262 0.328 0.393 0.458 0.525
2               0.163 0.196 0.229 0.262 0.328 0.393 0.458 0.525
2.125                 0.196 0.229 0.262 0.328 0.393 0.458 0.524
2.25                 0.196 0.229 0.262 0.328 0.393 0.458 0.524
2.5                   0.228 0.261 0.327 0.393 0.458 0.524
2.75                   0.228 0.261 0.327 0.393 0.458 0.524
3                   0.227 0.26 0.327 0.392 0.457 0.523
3.25                     0.26 0.326 0.392 0.457 0.523
3.5                       0.326 0.391 0.456 0.522
3.75                         0.391 0.456 0.522
4                         0.39 0.455 0.521
4.25                         0.39 0.455 0.521
4.5                           0.454 0.52
seed
note 1
2 2   2   2                  

THERE HAS THREE HALF-LENGTH GROOVES AND SUITABLE FOR USE IN BOTH BLIND AND THROUGH HOLES AS A SPRING ANCHOE PIN.

INSTALLATOION METHOD:

     DRILLED AND DEAMED HOLE

PRESS OR DRIVE INTO PLACE

LOCK SECURELY AND EASY TO SEPARATE. 

ALUMINUM/STEEL BLIND RIVETS

ALUMINUM/ STEEL BLIND RIVETS TS.AAS. SERIES

 

  

TS.AAS.

ITEM SIZE

ALUMINUM RIVET

STEEL SHAFT

A(HEAD DIA.) B(BODY DIA.) (INCH) C(LENGTH) (INCH)
TS.AAS 3-2 4.5mm 2.4mm 3/32 5.80mm .23
TS.AAS 3-3 7.40mm .30
TS.AAS 3-4 8.40mm .33
TS.AAS 4-1 6.4mm 3.2mm 1/8 4.80mm .19
TS.AAS 4-2 6.40mm .25
TS.AAS 4-3 8.00mm .315
TS.AAS 4-4 9.60mm .38
TS.AAS 4-5 11.50mm .45
TS.AAS 4-6 12.70mm .50
TS.AAS 4-8 16.10mm .63
TS.AAS 5-1 8.0mm 4.0mm 5/3 5.80mm .23
TS.AAS 5-2 7.00mm .275
TS.AAS 5-3 8.50mm .335
TS.AAS 5-4 10.00mm .394
TS.AAS 5-5 11.40mm .488
TS.AAS 5-6 13.00mm .511
TS.AAS 5-8 16.50mm .65
 TS.AAS 5-10 19.50mm .77
TS.AAS 6-1 9.0mm 4.8mm 3/16 6.40mm .25
TS.AAS 6-2 7.40mm .30
TS.AAS 6-3 9.60mm .38
TS.AAS 6-4 11.00mm .44
TS.AAS 6-5 12.70mm .50
TS.AAS 6-6 14.50mm .57
TS.AAS 6-8 17.50mm .69
TS.AAS 6-10 20.40mm .80
TS.AAS 6-12 24.00mm .95

MATERIAL AVAILABLE FOR ALUMINUM/ STEEL BLIND RIVETS TS.AAS. SERIES:

RIVET:   ALUMINUM 5050
SHAFT: STEEL 1018 ~ 1022

FINISH SURFACE AVAILABLE:
RIVET:   SELF COULOUR/ COLOURED IN YELLOW/ BLACK/ WHITE/ RED…ETC
SHAFT:  CR3 WHITE ZINC PLATED/ CR3 YELLOW ZINC PLATED

ADVANTAGES OF ALUMINUM/STEEL BLIND RIVET:

  • ALUMINUM/STEEL BLIND RIVETS PROVIDE STRONG HOLDING FOR APPLICATION.
  • ALUMINUM/STEEL BLIND RIVETS ARE LOW IN COST COMPARE WITH BOLT AND NUT.
  • ALUMINUM/STEEL BLIND RIVETS ARE IDEAL FOR WIDE RANGE APPLICATION.
  • ALUMINUM/STEEL BLIND RIVETS ARE AVAILABLE IN DOME, COUNTERSUNK OR LARGE FLANGE STYLE.
  • ALUMINUM/STEEL BLIND RIVETS ARE FAST AND EASY TO INSTALL.
  • ALUMINUM/STEEL BLIND RIVETS ARE IDEAL FOR RUST RESISTANCE APPLICATION.
  • ALUMINUM/STEEL BLIND RIVETS ARE IDEAL FOR LIGHT WEIGHT USAGE.★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

  • TOP QUALITY INSTRUMENT INC. USA

  • http://www.topqualityinstrument.com/

TRUSS COMBO HEAD POST SCREW

TRUSS COMBO HEAD POST SCREW

8#-32 COMBO HEAD FEMALE POST / BLIND THREAD / STEEL  
A H D F L PART NO.
0.3750 0.0940 0.2030 8#-32 THREAD 3/8″ SB832-38
1/2″ SB832-12
5/8″ SB832-58
3/4″ SB832-34
1″ SB832-12
1.32″ SB832-132

10#-24 COMBO HEAD FEMALE POST / TAPPED THROUGH / STEEL 
A H D F L PART NO.
0.4300 0.1050 0.2440 10#-24 THREAD 1/4″ SB1024-14
3/8″ SB1024-38
1/2″ SB1024-12
5/8″ SB1024-58
3/4″ SB1024-34
1″ SB1024-1
1-1/4″ SB1024-114
1/1-2″ SB1024-112
2″ SB1024-2

1/4#-20 COMBO HEAD FEMALE POST / TAPPED THROUGH / STEEL 
A H D F L PART NO.
0.5630 0.1560 0.3130 1/4-20 THREAD 3/8″ SB1420-38
1/2″ SB1420-12
3/4″ SB1420-34
1″ SB1420-1
1/4″ SB1420-14
1-1/2″ SB1420-112
1-3/4″ SB1420-134
2″ SB1420-2

5/6#-18 COMBO HEAD FEMALE POST / TAPPED THROUGH / STEEL 
A H D F L PART NO.
0.6875 0.1720 0.3750 5/16-18 THREAD 3/8″ SB51618-38
1/2″ SB51618-12
5/8″ SB51618-58
3/4″ SB51618-34
7/8″ SB51618-78
1″ SB51618-1
1-1/4″ SB51618-114
1-1/2″ SB51618-112

8#-32  SCREW COMBO HEAD / STEEL
A H D1 L PART NO.
0.3750 0.0940 8#-32 THREAD 5/16″ SS832-516

10#-24 SCREW COMBO HEAD / STEEL
A H D1 L PART NO.

0.4300

0.1050 10#-24 THREAD 5/16″ SS1024-516

1/4#-20 SCREW COMBO HEAD / STEEL
A H D1 L PART NO.

0.5625

0.1563 1/4-20 THREAD 5/16″ SS1420-516

5/16#-18 SCREW COMBO HEAD / STEEL
A H D1 L PART NO.
0.6875 0.1720 5/16-18 THREAD 3/8″ SS51618-38
1/2″ SS51618-12

MATERIAL AVAILABLE FOR TRUSS COMBO HEAD POST SCREW: 
STEEL, STAINLESS STEEL , ALUMINUM, BRASS

★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

TOP QUALITY INSTRUMENT INC. USA

http://www.topqualityinstrument.com/

BINDING POST SCREW / CHICAGO SCREW

BINDING POST SCREW / CHICAGO SCREW

#8-32 FLAT HEAD FEMALE NUT/ BLIND THREAD/ ALUMINUM
A H D F L PART NUMBER
0.394″ 0.078″ 0.197″ 8-32 THREAD 1/4″ AB8321-14
5/16″ AB832-516
3/8″ AB832-38
1/2″ AB832-12
5/8″ AB832-58
3/4″ AB832-34
1″ AB832-1
1 1/4″ AB832-114
1 1/2″ AB832-112
1 3/4″ AB832-134
2″ AB832-2
2 1/4″ AB832-214
2 1/2″ AB832-212
2 3/4″ AB832-234
3″ AB832-3
3 1/4″ AB832-314
3 1/2″ AB832-312
3 3/4″ AB832-334
4″ AB832-4
#8-32 FLAT HEAD FEMALE NUT/ BLIND THREAD/ ALUMINUM
A H D F L PART NUMBER
0.394″ 0.055″ 0.197″ 8-32 THREAD 1/8″ AI8321-18
3/16″ AI832-316
1/4″ AI832-14
3/8″ AI832-38
1/2″ AI832-12
#8-32 EXTENDED SCREW/ALUMINUM
D D1 L L1 F G PART NUMBER
0.197″ 8-32 THREAD 1/4″ 0.2″ 8-32 THREAD 0.433″ AE8321-14
1/2″ AE832-12
3/4″ AI832-34
1″ AE832-1
#8-32 MALE SCREW/ALUMINUM
D D1 L PART NUMBER
0.413″ 8-32 THREAD 3/16″ AM832-316
5/16″ AM832-516

MATERIAL AVAILABLE FOR BINDING POST SCREW:
ALUMINUM

★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

Image

TOP QUALITY INSTRUMENT INC. USA

http://www.topqualityinstrument.com/