KNURLED THREAD INSERT ST SERIES

ST SERIES KNURLED THREAD INSERT

KNURLED THREAD INSERT TOP QUALITY

ST series Threaded insert is designed to be installed in the small space. The body length after riveting is shorter than any standard type of blind rivet nut. The head of insert can press tightly against surface of application.

ST series can be installed on application which the thickness is thicker than 0.03” (0.76mm) and the application can be most any type of material.

The material for ST series can be Steel and Stainless Steel.

Further information about recommended hole size, grip range and application thickness. Please refer below table.

 

Unified (inch) and meteric thread sizes

THREAD SIZE

PART NO. HD

±0.005

L

±0.015

D

MAX

IL

MAX

LB

±0.015

ILB

MAX

IATD

MAX

HOLE

DEPTH MIN

UNC 4-40 CATI 440 .211 .370 .1875 .205 .660 .495 .395

.400

UNC 6-32

CATI 632 .240 .370 .2185 .205 .675 .505 .410 .400
UNC 8-32 CATI 832 .269 .370 .2495 .205 .675 .505 .410

.400

UNC 10-24

CATI 1024 .306 .370 .2805 .205 .685 .520 .385 .400
UNC 10-32 CATI 1032 .306 .370 .2805 .205 .685 .520 .385

.400

UNC 1/4-20

CATI 420 .400 .515 .3745 .275 1.005 .760 .615 .540
UNC 5/16-18 CATI 518 .528 .615 .4995 .325 1.065 .770 .630

.640

UNC 3/8-16

CATI 616 .588 .745 .5615 .390 1.450 1.095 .890 .770
UNC 1/2-13 CATI 1213 .800 .935 .7485 .485 NA NA NA

.960

THREAD SIZE

PART NO. HD

±0.005

L

±0.015

D

MAX

IL

MAX

LB

±0.015

ILB

MAX

IATD

MAX

HOLE

DEPTH MIN

ISO M3x0,5 CATM 350 5,36 9,40 4,76 5,21 16,77 12,57 10,03

10,16

ISO M4x0,7

CATM 470 6,83 9,40 6,34 5,21 17,15 12,83 10,41 10,16
ISO M5x0,8 CATM 580 7,77 9,40 7,12 5,21 17,40 13,21 9,78

10,16

ISO M6x1,0

CATM 610 10,16 13,08 9,51 6,99 25,53 19,30 15,62 13,72
ISO M8x1,25 CATM 8125 13,41 15,62 12,69 8,26 27,05 19,56 16,00

16,26

ISO M10x1,5

CATM 1015 14,94 18,92 14,26 9,91 36,83 27,81 22,61 19,56
ISO M12x1,75 CATM 12175 20,32 23,75 19,01 12,32 NA NA NA

24,38

 

Hole size / meterial thickness chart

THREAD SIZE

.030-.090 MAT. THICKNESS .091-.124 MAT. THICKNESS .125-.186 MAT. THICKNESS

.187-OVER MAT. THICKNESS

DRILL SIZE

DECIMAL DRILL SIZE DECIMAL DRILL SIZE DECIMAL DRILL SIZE DECIMAL
UNC 4-40 3/16 .1875 #10 .1935 #10 .1935 #9

.1960

UNC 6-32

7/32 .2188 #2 .2210 #1 .2280 #1 .2280
UNC 8-32 1/4 .2500 “F” .2570 17/64 .2656 17/64

.2656

UNC 10-24

9/32 .2812 “L” .2900 “L” .2900 19/64 .2969
UNC 10-32 9/32 .2812 “L” .2900 “L” .2900 19/64

.2969

UNC 1/4-20

0.375 .3750 0.375 .3750 “W” .3860 25/64 .3906
UNC 5/16-18 0.5 .5000 0.5 .5000 33/64 .5156 33/64

.5156

UNC 3/8-16

0.5625 .5625 0.5625 .5625 37/64 .5781 37/64 .5781
UNC 1/2-13 0.75 .7500 0.765625 .7656 25/32 .7810 51/64

.7970

THREAD SIZE

.030-.090 MAT. THICKNESS .091-.124 MAT. THICKNESS .125-.186 MAT. THICKNESS .187-OVER MAT. THICKNESS

DRILL SIZE

DECIMAL DRILL SIZE DECIMAL DRILL SIZE DECIMAL DRILL SIZE

DECIMAL

ISO M3x0,5 4,75 .1875 4,90 .1935 4,90 .1935 4,97

.1960

ISO M4x0,7

6,35 .2500 6,52 .2570 6,74 .2656 6,74 .2656
ISO M5x0,8 7,14 .2812 7,36 .2900 7,36 .2900 7,54

.2969

ISO M6x1,0

9,52 .3750 9,52 .3750 9,80 .3860 9,92 .3906
ISO M8x1,25 12,70 .5000 12,70 .5000 13,09 .5156 13,09

.5156

ISO M10x1,5

14,28 .5625 14,28 .5625 14,68 .5781 14,68 .5781
ISO M12x1,75 19,05 .7500 19,44 .7656 19,83 .7810 20,24

.7970

 

ST series Threaded insert is commonly used in any industry including automobile industry.

 

TOP QUALITY INSTRUMENT INC.

MAIL:topqualityinstrument@gmail.com

PLUSNUT – PRE-BULBED

 

PLUSNUT – PRE-BULBED

( QUAD FOLDING RIVETNUTS / SPLIT NUT )

PLUSNUT-PRE-BULBED-4-tq

PLUSNUT PRE-BULBED – DIMENSIONS & SPECIFICATIONS

(MILLIMETERS)

PART NO. THREAD

SIZE

GRIP

RANGE

HOLE

SIZE

HEAD DIA.

(H)

HEAD THICKNESS

(t)

BODY DIA.

(D)

LENGTH

(L)

TOPSN6

M6PH1.0 0.50-7.10 9.80-9.93 15.90 1.50 9.76 26.20
TOPSN6-L M6PH1.0 7.10-12.70 9.80-9.93 15.90 1.50 9.76

32.00

TOPSN8

M8PH1.25 0.50-7.10 12.29-12.42 19.00 1.57 12.25 30.00
TOPSN8-L M8PH1.25 7.10-12.70 12.29-12.42 19.00 1.57 12.25

35.80

PLUSNUT PRE-BULBED – DIMENSIONS & SPECIFICATIONS

(INCH)

PART NO.

THREAD

SIZE

GRIP

RANGE

HOLE

SIZE

HEAD DIA.

(H)

HEAD THICKNESS

(t)

BODY DIA.

(D)

LENGTH

(L)

TOPSN1032

10-32 0.020-0.175 0.312-0.317 0.500 0.038 0.310 0.800
TOPSN1032-L 10-32 0.175-0.320 0.312-0.317 0.500 0.038 0.310

0.940

TOPSN420

1/4-20 0.020-0.280 0.386-0.391 0.625 0.058 0.384 1.030
TOPSN420-L 1/4-20 0.280-0.500 0.386-0.391 0.625 0.058 0.384

1.260

TOPSN518

5/16-18 0.020-0.280 0.484-0.489 0.750 0.062 0.482 1.180
TOPSN518-L 5/16-18 0.280-0.500 0.484-0.489 0.750 0.062 0.482

1.410

PLUSNUT PRE-BULBED DRAWING

FEATURES:

SUPERB PULL-OUT STRENGTH, EXCEPTIONAL TORQUE.

WIDE GRIP RANGE.

FASTENS SECURELY IN UNEVEN SURFACES.

INSTALLS CLEANLY WITHOUT DISTORT, DEFORM OR DAMAGING PARENT MATERIAL (EX. SOFT PLASTICS, THIN SHEET METAL).

THE FOUR LEGS ARE PULLED TOGETHER EXPANDING OUTWARDS BEHIND THE SURFACE MATERIAL TO PROVIDE A LARGE LOAD BEARING AREA.

SPECIFICALLY DESIGNED FOR USE IN SOFT AND BRITTLE MATERIALS, SHEET METAL, FIBERGLASS, PLASTICS AND COMPOSITES.

 

APPLICATIONS:

AEROSPACE (E.G., INSTRUMENT PANEL, SEATBELT)

AUTOMOBILES AND MOTORCYCLES PARTS AND MOLDINGS (E.G., CAR TOP CARRIERS)

TRUCKS AND TRAILERS SANDWICH SECTIONS AND PANELLING.

DOMESTIC APPLIANCES – HANDLES, ADJUSTABLE FEET AND FIXING POINTS.

PLASTIC FABRICATIONS:ELECTRONICS, ENCLOSURES…ETC.

 

TOP QUALITY INSTRUMENT INC.

MAIL:topqualityinstrument@gmail.com

防滲水拉帽 SEAL RIVET NUT

防滲水拉帽

SEAL RIVET NUT

SEAL RIVET NUT -3-tq SEAL RIVET NUT -4-tq SEAL RIVET NUT -5-tq SEAL RIVET NUT SERIES-tq

防滲水拉帽之材質:

鋁5056、白鐵

 

防滲水拉帽之表面處理:

洗清、陽極

 

防滲水拉帽之特性:

以特殊的防漏材料永久附著於帽沿底部,以達到防止空氣、灰塵、水、水蒸氣、二甲苯、甘油(防凍劑)等滲入或洩漏之功效

工作溫度從-40℃到150℃

 

防滲水拉帽之應用:

戶外機械

戶外電子儀器

戶外照明設備

 

★其他尺寸,材質和表面處理可依客戶要求訂做。

 

MATERIAL AVALIABLE:

ALUMINUM 5056, STAINLESS STEEL

 

SURFACE FINISH AVALIABLE:

CLEAN, ANODIC TREATMENT

 

CHARACTERISTICS OF SEAL RIVET NUT:

NYPLAS IS APPLIED COATING UNDER THE HEAD OF THE BLIND RIVET NUT TO PROVIDE SEALING AGAINST AIR, DUST, WATER AND MOISTURE.

WORKING TEMPERATURE: -40℃ TO 150℃.

 

APPLICATIONS OF SEAL RIVET NUT:

OUTDOOR MACHINE

OUTDOOR ELECTRIC EQUIPMENT

OUTDOOR LIGHTING EQUIPMENT

 

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

TSC5 SELF CLINCHING LOCK NUT

SELF CLINCHING PARTS

TSC5 SELF CLINCHING LOCK NUT

1(topquality)

MATERIAL AVAILABLE FOR SELF CLINCHING LOCK NUT:

STEEL, STAINLESS STEEL, ALUMINUM AND BRASS

 

ADVANTAGES OF CLINCHING PARTS:

1. PROVIDE STRONG THREADS IN METAL AS THIN AS 020″ / .51 MM.

2. MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.

3. PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.

4. DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.

5. REVERSE SIDE OF METAL SHEET REMAINS FLUSH.

6. NO RETAPPING NECESSARY AFTER APPLICATION.

7. LOW INSTALLED COSTS.

 – NUTS

NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.

 

-OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

3(topquality)

4(topquality)