KNURLED THREAD INSERT ST SERIES

ST SERIES KNURLED THREAD INSERT

KNURLED THREAD INSERT TOP QUALITY

ST series Threaded insert is designed to be installed in the small space. The body length after riveting is shorter than any standard type of blind rivet nut. The head of insert can press tightly against surface of application.

ST series can be installed on application which the thickness is thicker than 0.03” (0.76mm) and the application can be most any type of material.

The material for ST series can be Steel and Stainless Steel.

Further information about recommended hole size, grip range and application thickness. Please refer below table.

 

Unified (inch) and meteric thread sizes

THREAD SIZE

PART NO. HD

±0.005

L

±0.015

D

MAX

IL

MAX

LB

±0.015

ILB

MAX

IATD

MAX

HOLE

DEPTH MIN

UNC 4-40 CATI 440 .211 .370 .1875 .205 .660 .495 .395

.400

UNC 6-32

CATI 632 .240 .370 .2185 .205 .675 .505 .410 .400
UNC 8-32 CATI 832 .269 .370 .2495 .205 .675 .505 .410

.400

UNC 10-24

CATI 1024 .306 .370 .2805 .205 .685 .520 .385 .400
UNC 10-32 CATI 1032 .306 .370 .2805 .205 .685 .520 .385

.400

UNC 1/4-20

CATI 420 .400 .515 .3745 .275 1.005 .760 .615 .540
UNC 5/16-18 CATI 518 .528 .615 .4995 .325 1.065 .770 .630

.640

UNC 3/8-16

CATI 616 .588 .745 .5615 .390 1.450 1.095 .890 .770
UNC 1/2-13 CATI 1213 .800 .935 .7485 .485 NA NA NA

.960

THREAD SIZE

PART NO. HD

±0.005

L

±0.015

D

MAX

IL

MAX

LB

±0.015

ILB

MAX

IATD

MAX

HOLE

DEPTH MIN

ISO M3x0,5 CATM 350 5,36 9,40 4,76 5,21 16,77 12,57 10,03

10,16

ISO M4x0,7

CATM 470 6,83 9,40 6,34 5,21 17,15 12,83 10,41 10,16
ISO M5x0,8 CATM 580 7,77 9,40 7,12 5,21 17,40 13,21 9,78

10,16

ISO M6x1,0

CATM 610 10,16 13,08 9,51 6,99 25,53 19,30 15,62 13,72
ISO M8x1,25 CATM 8125 13,41 15,62 12,69 8,26 27,05 19,56 16,00

16,26

ISO M10x1,5

CATM 1015 14,94 18,92 14,26 9,91 36,83 27,81 22,61 19,56
ISO M12x1,75 CATM 12175 20,32 23,75 19,01 12,32 NA NA NA

24,38

 

Hole size / meterial thickness chart

THREAD SIZE

.030-.090 MAT. THICKNESS .091-.124 MAT. THICKNESS .125-.186 MAT. THICKNESS

.187-OVER MAT. THICKNESS

DRILL SIZE

DECIMAL DRILL SIZE DECIMAL DRILL SIZE DECIMAL DRILL SIZE DECIMAL
UNC 4-40 3/16 .1875 #10 .1935 #10 .1935 #9

.1960

UNC 6-32

7/32 .2188 #2 .2210 #1 .2280 #1 .2280
UNC 8-32 1/4 .2500 “F” .2570 17/64 .2656 17/64

.2656

UNC 10-24

9/32 .2812 “L” .2900 “L” .2900 19/64 .2969
UNC 10-32 9/32 .2812 “L” .2900 “L” .2900 19/64

.2969

UNC 1/4-20

0.375 .3750 0.375 .3750 “W” .3860 25/64 .3906
UNC 5/16-18 0.5 .5000 0.5 .5000 33/64 .5156 33/64

.5156

UNC 3/8-16

0.5625 .5625 0.5625 .5625 37/64 .5781 37/64 .5781
UNC 1/2-13 0.75 .7500 0.765625 .7656 25/32 .7810 51/64

.7970

THREAD SIZE

.030-.090 MAT. THICKNESS .091-.124 MAT. THICKNESS .125-.186 MAT. THICKNESS .187-OVER MAT. THICKNESS

DRILL SIZE

DECIMAL DRILL SIZE DECIMAL DRILL SIZE DECIMAL DRILL SIZE

DECIMAL

ISO M3x0,5 4,75 .1875 4,90 .1935 4,90 .1935 4,97

.1960

ISO M4x0,7

6,35 .2500 6,52 .2570 6,74 .2656 6,74 .2656
ISO M5x0,8 7,14 .2812 7,36 .2900 7,36 .2900 7,54

.2969

ISO M6x1,0

9,52 .3750 9,52 .3750 9,80 .3860 9,92 .3906
ISO M8x1,25 12,70 .5000 12,70 .5000 13,09 .5156 13,09

.5156

ISO M10x1,5

14,28 .5625 14,28 .5625 14,68 .5781 14,68 .5781
ISO M12x1,75 19,05 .7500 19,44 .7656 19,83 .7810 20,24

.7970

 

ST series Threaded insert is commonly used in any industry including automobile industry.

 

TOP QUALITY INSTRUMENT INC.

MAIL:topqualityinstrument@gmail.com

自攻螺紋襯套 SELF TAPPING THREAD INSERTS – SLOTTED SERIES

自攻螺紋襯套 SELF TAPPING THREAD INSERTS – SLOTTED SERIES

SELF TAPPING - SLOTTED SERIES-tq SELF TAPPING - SLOTTED-BRASS-tq SELF TAPPING - SLOTTED-YA-tq SELF TAPPING - SLOTTED-YELLOW-tq

自攻螺紋襯套之材質:

鐵,白鐵303(A1),316(A4),銅3604 (鐵材質可依客戶表面處理要求。)

 

自攻螺紋襯套之特性:

  • 自攻螺紋襯套安裝容易
  • 自攻螺紋襯套能取代螺紋護套
  • 自攻螺紋襯套能在軟質金屬像鋁或塑膠母件上提供強力的螺牙
  • 自攻螺紋襯套安裝後十分緊固,不會因外加之震動而造成鬆脫

 

潰牙的剋星

  • 解決潰牙、崩牙、滑牙的救星

  • 強化和修補的最佳產品

  • 裝置簡易快速

  • 適用於各種引擎及輕量化材質

 

自攻螺紋襯套之應用:

自攻螺紋襯套適用於各式材質的物件,例如塑膠、鋁、鑄鐵

 

★其他尺寸和材質可以客戶需求訂製。

 

MATERIAL AVAILABLE:

STEEL, STAINLESS STEEL 303 (A1), STAINLESS STEEL 316 (A4 / 18-10), BRASS C3604

 

SURFACE FINSIH AVAILABLE:

CR3 WHITE/YELLOW ZINC PLATED

 

CHARACTERISTICS:

EASY TO INSTALLED

DESIGNED TO REPLACE SPRING COIL

PROVIDE STRONG THREADS FOR WEAK MATERIAL LIKE ALUMINUM OR PLASTIC

ABLE TO INSTALL FOR VIBRATING ENVIRONMENT

 

APPICATIONS:

CAN BE APPLIED TO DIFFERENT MATERIAL SUCH AS PLASTIC, ALUMINUM, CAST IRON

DESIGNED TO APPLY IN WEAK MATERIAL WHERE THREADS ARE FRENQUENTLY USED

 

★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

EXPANSION ANCHOR

EXPANSION ANCHOR

 擴張式壁虎1

FEATURES OF ANCHOR BOLT:

  • EASY TO INSTALL
  • HIGH LOAD CAPACITIES EVEN IN THE LOW DENSITY BASE MATERIAL
  • WITHOUT THERMAL BRIDGE
  • QUICK INSTALLATION
  • DOUBLE SAFETY FEATURES
  • MATERIAL ELECTROPLATED AND GALVANIZED

INSTALLATION:

基本 CMYK

基本 CMYK基本 CMYK

ADVANTAGE & BENEFIT OF ANCHOR BOLT:

  • INVISIBLE FROM FRONT OF FAÇADE
  • STRESS-FREE FIXING IN NATURAL STONE
  • MAXIMU POSSIBLE PULL-OUT LOEAD HIGH COLLAPSE LOADS THAN TRADITIONAL SYSTEM
  • FAST & EASY INSTALLATION OF REVEAL
  • STATIC OPTIMISED POSITION OF ANCHOR THE MAX. BENDING STRESS IS REDUCED BY 50%

FIELDS OF APPLICATION:

  • CURTAIN WALL INSTALLATION
  • BUILDING CURTAIN GLASS INSTALLATION
  • MARBLE INSTALLATION
  • STRENGTHENED GLASS INSTALLATION

EXAMPLE:

擴張式壁虎4-ENG 台中市市政大樓

擴張式壁虎5(topquality)

TSC5 SELF CLINCHING LOCK NUT

SELF CLINCHING PARTS

TSC5 SELF CLINCHING LOCK NUT

1(topquality)

MATERIAL AVAILABLE FOR SELF CLINCHING LOCK NUT:

STEEL, STAINLESS STEEL, ALUMINUM AND BRASS

 

ADVANTAGES OF CLINCHING PARTS:

1. PROVIDE STRONG THREADS IN METAL AS THIN AS 020″ / .51 MM.

2. MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.

3. PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.

4. DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.

5. REVERSE SIDE OF METAL SHEET REMAINS FLUSH.

6. NO RETAPPING NECESSARY AFTER APPLICATION.

7. LOW INSTALLED COSTS.

 – NUTS

NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.

 

-OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

3(topquality)

4(topquality)

TSC6 SELF CLINCHING STUD

(nnovacera / bolts and nuts / screw / fastener)

SELF CLINCHING PARTS

SELF CLINCHING STUD

TSC6

1(topquality) 2

MATERIAL: STEEL

PLATING: ZINC PLATED

ADVANTAGES OF CLINCHING PARTS:

1. PROVIDE STRONG THREADS IN METAL AS THIN AS 020″ / .51 MM.
2. MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
3. PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
4. DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
5. REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
6. NO RETAPPING NECESSARY AFTER APPLICATION.
7. LOW INSTALLED COSTS.

 STUDS

EXTERNALLY THREADED FASTENERS WHICH ARE USED WHERE THE ATTACHMENT MUST BE POSITIONED BEFORE BEING FASTENED.

3(topquality) 4(topquality)