ST SERIES-THREADED INSERT

KNURLED THREAD INSERT

ST series threaded insert is different from our standard type of blind rivet nut. The overall length is shorter than standard type which it allows to be used in small & narrow space.

Although it is short type but it can be installed into most any material with thickness over 0.03” (0.76mm).

The head of insert can press tightly against the surface of application after riveting.

It is commonly to be used in any industry including automobile industry

Material: Steel/ Stainless Steel/ Brass/ Aluminum

樣版2

UNFIED (INCH) AND METERIC THREAD SIZE

THREAD
SIZE

PART NO.

HD

±0.005

L

±0.015

D

MAX

IL

MAX

LB

±0.015

ILB

MAX

IATD

MAX

HOLE

DEPTHE
MIN

UNC 4-40

CAT I440

.211

.370

.1875

.205

.660

.495

.395

.400

UNC 6-32

CAT I630

.240

.370

.2185

.205

.675

.505

.410

.400

UNC 8-32

CATI 832

.269

.370

.2495

.205

.675

.505

.410

.400

UNC 10-24

CATI 1024

.306

.370

.2805

.205

.685

.520

.385

.400

UNC 10-32

CATI 1032

.306

.370

.2805

.205

.685

.520

.385

.400

UNC 1/4-20

CATI 420

.400

.515

.3745

.275

1.005

.760

.615

.540

UNC5/16-18

CATI 520

.528

.615

.4995

.325

1.065

.770

.630

.640

UNC 3/8-16

CATI 616

.588

.745

.5615

.390

1.450

1.095

.890

.770

UNC 1/2-13

CATI 1213

.800

.935

.7485

.485

NA

NA

NA

.960

THREAD
SIZE

PART NO.

HD

±0.005

L

±0.015

D

MAX

IL

MAX

LB

±0.015

ILB

MAX

IATD

MAX

HOLE

DEPTHE
MIN

ISO M3X05

CATM 350

5.36

9.40

4.76

5.21

16.77

12.57

10.03

10.16

ISO M4X0.7

CATM 470

6.83

9.40

6.34

5.21

17.15

12.83

10.41

10.16

ISO M5X0.8

CATM 580

7.77

9.40

7.12

5.21

17.40

13.21

9.78

10.16

ISO M6X1.0

CATM 610

10.16

13.08

9.51

6.99

25.53

19.30

15.62

13.72

ISO M8X1.25

CATM 8125

13.41

15.62

12.69

8.26

27.05

19.56

16.00

16.26

ISO M10X1.5

CATM 1015

14.94

18.92

14.26

9.91

36.83

27.81

22.61

19.56

ISO M12X1.75

CATM 12175

20.32

23.75

19.01

12.32

NA

NA

NA

24.38

Hole size/material thickness chart

THREAD
SIZE

.303-.090MAT.

THICKNESS

.091-.124MAT.

THICKNESS

.125-.186MAT.

THICKNESS

.187-OVER MAT.

THICKNESS

DRILL
SIZE

DECIMAL

DRILL
SIZE

DECIMAL

DRILL
SIZE

DECIMAL

DRILL
SIZE

DECIMAL

UNC4-40

3/16

.1875

#10

.1935

#10

.1935

#9

.1960

UNC6-32

7/32

.2188

#2

.2210

#1

.2280

#1

.2280

UNC8-32

1/4

.2500

“F”

.2570

17/64

.2656

17/64

.2656

UNC10-24

9/32

.2812

“L”

.2900

“L”

.2900

19/64

.2969

UNC10-32

9/32

.2812

“L”

.2900

“L”

.2900

19/64

.2969

UNC1/4-20

0.375

.3750

0.375

.3750

“W”

.3860

25/64

.3906

UNC5/16-18

0.5

.5000

0.5

.5000

33/64

.5156

33/64

.5156

UNC3/8-16

0.5625

.5625

0.5625

.5625

37/64

.5781

37/64

.5781

UNC1/2-13

0.75

.7500

0.765625

.7656

25/32

.7810

51/64

.7970

THREAD
SIZE

.303-.090MAT.

THICKNESS

.091-.124MAT.

THICKNESS

.125-.186MAT.

THICKNESS

.187-OVER MAT.

THICKNESS

DRILL
SIZE

DECIMAL

DRILL
SIZE

DECIMAL

DRILL
SIZE

DECIMAL

DRILL
SIZE

DECIMAL

ISO M3X0.5

3/16

.1875

#10

.1935

#10

.1935

#9

.1960

ISO M4X0.7

7/32

.2188

#2

.2210

#1

.2280

#1

.2280

ISO M5X0.8

1/4

.2500

“F”

.2570

17/64

.2656

17/64

.2656

ISO M6X1.0

9/32

.2812

“L”

.2900

“L”

.2900

19/64

.2969

ISO M8X1.25

9/32

.2812

“L”

.2900

“L”

.2900

19/64

.2969

ISO M10X1.5

0.375

.3750

0.375

.3750

“W”

.3860

25/64

.3906

ISO M12X1.25

0.5

.5000

0.5

.5000

33/64

.5156

33/64

.5156

TOP QUALITY INSTRUMENT INC.

MAIL:topqualityinstrument@gmail.com

TSC 1 SELF-CLINCHING STANDOFFS

TSC 1  SELF-CLINCHING STANDOFFS

TSC1-tq TSC1-DRAWING-tq

ADVANTAGES OF CLINCHING PARTS:

  • May be installed using any parallel acting squeezing force.
  • Provide high pushout and torque-out resistance.
  • Do not require special hole preparation, such as chamfering and deburring.
  • Reverse side of metal sheet remains flush.
  • No retapping necessary after application.
  • Low installed costs.

 

STANDOFFS

Used where it is necessary to stack or space components away from the panel.

Thru-threaded or blind types are generally standard.

 

 Other sizes, material are available upon request.

SELF CLINCHING PARTS SERIES-2-tq SELF CLINCHING PARTS SERIES-tq

SELF CLINCHING SERIES

SELF CLINCHING SERIES 

TSC1 SELF CLINCHING STANDOFFS

★STANDOFFS:

USED WHERE IT IS NECESSARY TO STACK OR SPACE COMPONENTS AWAY FROM THE PANEL. THRU-THREADED OR BLIND TYPES ARE GENERALLY STANDARD. 

  

TSC4 SELF CLINCHING NUTS

★NUTS:

NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.

 

TSC5 SELF CLINCHING LOCK NUTS 

★NUTS:

NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.

 

TSC6 SELF CLINCHING STUDS

STUDS:

EXTERNALLY THREADED FASTENERS WHICH ARE USED WHERE THE ATTACHMENT MUST BE POSITIONED BEFORE BEING FASTENED.

  

TSC7 SELF CLINCHING STANDOFFS

★STANDOFFS:

USED WHERE IT IS NECESSARY TO STACK OR SPACE COMPONENTS AWAY FROM THE PANEL. THRU-THREADED OR BLIND TYPES ARE GENERALLY STANDARD. 

  

TSC8 SELF CLINCHING NUTS

★NUTS:

NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.

 

ADVANTAGES OF CLINCHING PARTS:

  • MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.

  • PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.

  • DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.

  • REVERSE SIDE OF METAL SHEET REMAINS FLUSH.

  • NO RETAPPING NECESSARY AFTER APPLICATION.

  • LOW INSTALLED COSTS.

EXPANSION ANCHOR

EXPANSION ANCHOR

 擴張式壁虎1

FEATURES OF ANCHOR BOLT:

  • EASY TO INSTALL
  • HIGH LOAD CAPACITIES EVEN IN THE LOW DENSITY BASE MATERIAL
  • WITHOUT THERMAL BRIDGE
  • QUICK INSTALLATION
  • DOUBLE SAFETY FEATURES
  • MATERIAL ELECTROPLATED AND GALVANIZED

INSTALLATION:

基本 CMYK

基本 CMYK基本 CMYK

ADVANTAGE & BENEFIT OF ANCHOR BOLT:

  • INVISIBLE FROM FRONT OF FAÇADE
  • STRESS-FREE FIXING IN NATURAL STONE
  • MAXIMU POSSIBLE PULL-OUT LOEAD HIGH COLLAPSE LOADS THAN TRADITIONAL SYSTEM
  • FAST & EASY INSTALLATION OF REVEAL
  • STATIC OPTIMISED POSITION OF ANCHOR THE MAX. BENDING STRESS IS REDUCED BY 50%

FIELDS OF APPLICATION:

  • CURTAIN WALL INSTALLATION
  • BUILDING CURTAIN GLASS INSTALLATION
  • MARBLE INSTALLATION
  • STRENGTHENED GLASS INSTALLATION

EXAMPLE:

擴張式壁虎4-ENG 台中市市政大樓

擴張式壁虎5(topquality)

JACK NUTS FOR LATEST TYPE LICENSE PLATE

STAINLESS STEEL BLIND JACK NUTS

FOR LATEST TYPE LICENSE PLATE

LEBEL

CAR-ENGLISH

 CAR2-ENGLISH

The latest type license plates’ width and height are different from the original license plate. In addition, when you replace the license plate, you find that the holes place of the latest type license plate and the bodywork are not matched.

HOW TO SOLVE?

YOU JUST NEED OUR PRODUCT

☆ STAINLESS STEEL BLIND JACK NUT ☆

3(topquality)

THE BLIND JACK NUT IS AN ECONOMICAL BLIND FASTENER. WHEN TIGHTENED, THEIR BODY COLLAPSES TO FORM LEGS WHICH GRIP THE INSIDE OF THE MOUNTING SURFACE, LEAVING A PERMANENT REUSABLE THREADED INSERT.

ADVANTAGE FOR STAINLESS STEEL BLIND JACK NUT:

  • AVOID CORROSION
  • PREVENT RUST
  • SUITABLE FOR OUTDOOR

FEATURES FOR BLIND JACK NUT:

  • FASTENS IN BLIND HOLES
  • FASTENS SECURELY DESPITE BURRS & UNEVEN SUBSTRATES
  • NOT HOLE SIZE SENSITIVE
  • SUITABLE FOR WIDE GRIP RANG

INSTALLATION STEPS FOR BLIND JACK NUT:

未命名-1

TOP QUALITY INSTRUMENTS INC.

http://www.topqualityinstrument.com

sales1@topscrew.com.tw

T: 886-4-7237159

F: 886-4-7246640

TSC6 SELF CLINCHING STUD

(nnovacera / bolts and nuts / screw / fastener)

SELF CLINCHING PARTS

SELF CLINCHING STUD

TSC6

1(topquality) 2

MATERIAL: STEEL

PLATING: ZINC PLATED

ADVANTAGES OF CLINCHING PARTS:

1. PROVIDE STRONG THREADS IN METAL AS THIN AS 020″ / .51 MM.
2. MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
3. PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
4. DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
5. REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
6. NO RETAPPING NECESSARY AFTER APPLICATION.
7. LOW INSTALLED COSTS.

 STUDS

EXTERNALLY THREADED FASTENERS WHICH ARE USED WHERE THE ATTACHMENT MUST BE POSITIONED BEFORE BEING FASTENED.

3(topquality) 4(topquality)