KNURLED THREAD INSERT ST SERIES

ST SERIES KNURLED THREAD INSERT

KNURLED THREAD INSERT TOP QUALITY

ST series Threaded insert is designed to be installed in the small space. The body length after riveting is shorter than any standard type of blind rivet nut. The head of insert can press tightly against surface of application.

ST series can be installed on application which the thickness is thicker than 0.03” (0.76mm) and the application can be most any type of material.

The material for ST series can be Steel and Stainless Steel.

Further information about recommended hole size, grip range and application thickness. Please refer below table.

 

Unified (inch) and meteric thread sizes

THREAD SIZE

PART NO. HD

±0.005

L

±0.015

D

MAX

IL

MAX

LB

±0.015

ILB

MAX

IATD

MAX

HOLE

DEPTH MIN

UNC 4-40 CATI 440 .211 .370 .1875 .205 .660 .495 .395

.400

UNC 6-32

CATI 632 .240 .370 .2185 .205 .675 .505 .410 .400
UNC 8-32 CATI 832 .269 .370 .2495 .205 .675 .505 .410

.400

UNC 10-24

CATI 1024 .306 .370 .2805 .205 .685 .520 .385 .400
UNC 10-32 CATI 1032 .306 .370 .2805 .205 .685 .520 .385

.400

UNC 1/4-20

CATI 420 .400 .515 .3745 .275 1.005 .760 .615 .540
UNC 5/16-18 CATI 518 .528 .615 .4995 .325 1.065 .770 .630

.640

UNC 3/8-16

CATI 616 .588 .745 .5615 .390 1.450 1.095 .890 .770
UNC 1/2-13 CATI 1213 .800 .935 .7485 .485 NA NA NA

.960

THREAD SIZE

PART NO. HD

±0.005

L

±0.015

D

MAX

IL

MAX

LB

±0.015

ILB

MAX

IATD

MAX

HOLE

DEPTH MIN

ISO M3x0,5 CATM 350 5,36 9,40 4,76 5,21 16,77 12,57 10,03

10,16

ISO M4x0,7

CATM 470 6,83 9,40 6,34 5,21 17,15 12,83 10,41 10,16
ISO M5x0,8 CATM 580 7,77 9,40 7,12 5,21 17,40 13,21 9,78

10,16

ISO M6x1,0

CATM 610 10,16 13,08 9,51 6,99 25,53 19,30 15,62 13,72
ISO M8x1,25 CATM 8125 13,41 15,62 12,69 8,26 27,05 19,56 16,00

16,26

ISO M10x1,5

CATM 1015 14,94 18,92 14,26 9,91 36,83 27,81 22,61 19,56
ISO M12x1,75 CATM 12175 20,32 23,75 19,01 12,32 NA NA NA

24,38

 

Hole size / meterial thickness chart

THREAD SIZE

.030-.090 MAT. THICKNESS .091-.124 MAT. THICKNESS .125-.186 MAT. THICKNESS

.187-OVER MAT. THICKNESS

DRILL SIZE

DECIMAL DRILL SIZE DECIMAL DRILL SIZE DECIMAL DRILL SIZE DECIMAL
UNC 4-40 3/16 .1875 #10 .1935 #10 .1935 #9

.1960

UNC 6-32

7/32 .2188 #2 .2210 #1 .2280 #1 .2280
UNC 8-32 1/4 .2500 “F” .2570 17/64 .2656 17/64

.2656

UNC 10-24

9/32 .2812 “L” .2900 “L” .2900 19/64 .2969
UNC 10-32 9/32 .2812 “L” .2900 “L” .2900 19/64

.2969

UNC 1/4-20

0.375 .3750 0.375 .3750 “W” .3860 25/64 .3906
UNC 5/16-18 0.5 .5000 0.5 .5000 33/64 .5156 33/64

.5156

UNC 3/8-16

0.5625 .5625 0.5625 .5625 37/64 .5781 37/64 .5781
UNC 1/2-13 0.75 .7500 0.765625 .7656 25/32 .7810 51/64

.7970

THREAD SIZE

.030-.090 MAT. THICKNESS .091-.124 MAT. THICKNESS .125-.186 MAT. THICKNESS .187-OVER MAT. THICKNESS

DRILL SIZE

DECIMAL DRILL SIZE DECIMAL DRILL SIZE DECIMAL DRILL SIZE

DECIMAL

ISO M3x0,5 4,75 .1875 4,90 .1935 4,90 .1935 4,97

.1960

ISO M4x0,7

6,35 .2500 6,52 .2570 6,74 .2656 6,74 .2656
ISO M5x0,8 7,14 .2812 7,36 .2900 7,36 .2900 7,54

.2969

ISO M6x1,0

9,52 .3750 9,52 .3750 9,80 .3860 9,92 .3906
ISO M8x1,25 12,70 .5000 12,70 .5000 13,09 .5156 13,09

.5156

ISO M10x1,5

14,28 .5625 14,28 .5625 14,68 .5781 14,68 .5781
ISO M12x1,75 19,05 .7500 19,44 .7656 19,83 .7810 20,24

.7970

 

ST series Threaded insert is commonly used in any industry including automobile industry.

 

TOP QUALITY INSTRUMENT INC.

MAIL:topqualityinstrument@gmail.com

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s