SELF TAPPING THREADED INSERT SERIES

SELF TAPPING THREADED INSERT SERIES

SELF TAPPING THREADED INSERT SERIES-1-tq

 

◆  SLOTTED PART

SELF TAPPING - SLOTTED SERIES-tq SELF TAPPING - SLOTTED-BRASS-tq SELF TAPPING - SLOTTED-YA-tq SELF TAPPING - SLOTTED-YELLOW-tq

MATERIAL AVAILABLE:
STEEL, STAINLESS STEEL 303 (A1), STAINLESS STEEL 316 (A4 / 18-10), BRASS C3604

SURFACE FINSIH AVAILABLE:
CR3 WHITE/YELLOW ZINC PLATED

CHARACTERISTICS:
•EASY TO INSTALLED
•DESIGNED TO REPLACE SPRING COIL
•PROVIDE STRONG THREADS FOR WEAK MATERIAL LIKE ALUMINUM OR PLASTIC
•ABLE TO INSTALL FOR VIBRATING ENVIRONMENT

APPICATIONS:
•CAN BE APPLIED TO DIFFERENT MATERIAL SUCH AS PLASTIC, ALUMINUM, CAST IRON.
•DESIGNED TO APPLY IN WEAK MATERIAL WHERE THREADS ARE FRENQUENTLY USED.

◆ THREE HOLE THIN WALL/THICK WALL

SELF TAPPING - 3HOLE-1-tq SELF TAPPING - 3HOLE-2-tq

MATERIAL AVAILABLE:
STEEL, STAINLESS STEEL, ALUMINUM, ALUMINUM ALLOY, BRASS

FOR USE IN THICK WALL OR CLOSE TO AN EDGE

ADVANTAGE:
•HIGH PULL-OUT STRENGTH
•HIGH TORQUE RESISTANCE
•STRONG WEAR RESSTANCE THREAD
•FAST, EASY INSTALLATION
•EXTREME VIBRATION RESISTANCE

◆ THREE HOLE W. SLOTTED PIN

SELF TAPPING - 3HOLE WITH GROOVED PIN-tq

MATERIAL AVAILABLE:
STEEL, STAINLESS STEEL, ALUMINUM, ALUMINUM ALLOY, BRASS

FOR USE IN THIN WALL OR CLOSE TO AN EDGE

ADVANTAGE:
•HIGH PULL-OUT STRENGTH
•HIGH TORQUE RESISTANCE
•STRONG WEAR RESSTANCE THREAD
•FAST, EASY INSTALLATION
•EXTREME VIBRATION RESISTANCE

◆ MANUAL INSTALLATION TOOL

SELF TAPPING - THREAD INSERT TOOL-tq SELF TAPPING - THREAD INSERT TOOL-WAY2-tq

STEP 1. STEP 2. STEP 3.
鑽孔之後,將襯套裝置於工具上朝向要裝置的地方 維持工具垂直,向左旋轉將襯套轉入 裝入之後,將工具向右垂直旋轉出來,工具自然會自動地鬆開

HOLE SIZE:
RECOMMENDED HOLE SIZE IS INDICATED ON EACH DATA SHEET AND IS INTENDED TO BE FOR REFERENCE ONLY. HOLE SIZE MAY NEED TO BE INCREASED OR DECREASED DEPENDING ON BASE MATERIAL, INSTALLATION TORQUE OR PERFORMANCE REQUIRED. OPTIMUM HOLE SIZE SHOULD BE DETERMINED BY REQUESTING SAMPLES & INSTALLING THEM IN THE INTENDED MATERIAL.

HOLE DEPTH:
IN THRU HOLE APPLICATIONS THE INSERT LENGTH SHOULD NOT EXCEED THE MATERIAL THICKNESS. IN BLIND HOLE APPLICATIONS THE HOLE DEPTH SHOULD BE 1.2XINSERT LENGTH AND THIS VALUE IS INDICATED ON MOST DATA SHEETS.

COUNTERSINK
A 60°COUNTERSINK IS REQUIRED FOR MOST MATERIALS TO INSURE A FLUSH SURFACE AFTER INSTALLATION.

WALL THICKNESS
WALL THICKNESS SHOULD BE 0.35 TO 0.5 X HOLE DIAMETER DEPENDING ON BASE MATERIAL.

◆ AIR INSTALLATION TOOLS

SELF TAPPING - THREAD INSERT AIR TOOL-1-tq SELF TAPPING - THREAD INSERT AIR TOOL-2-tq SELF TAPPING - THREAD INSERT AIR TOOL-3-tq

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s